|
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified. |
| 3 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified. |
| 4 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 5 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 7 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 8 | S&F Factory made single extruded WPC (wood polymer composite) 35mm thick solid wire gauge door shutters including of double wire mesh (steel & aluminium XPM) , Comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screw , joint-less design manufactured with cnc machine . design as per executive engineer . |
| 9 | S&F 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified, complete all as specified NOTE :- All screws shall be self tapping chrome plated |
| 10 | S&F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) . |
| 11 | S & F factory made solid PVC door frame single rebated of size 50X47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube in opening as per spd & drg complete all as specified and directed. |
| 12 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 13 | Supply and fixing Factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete. Make/ Manufacture by 1. M/sTee Pee Amritsar 2. M/s Mahindra Fabricators Hayal Pathankot 3. M/S Dhiman Industries, Mamun: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. |
| 14 | Supply and fixing Factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete. Make/ Manufacture by 1. M/sTee Pee Amritsar 2. M/s Mahindra Fabricators Hayal Pathankot 3. M/S Dhiman Industries, Mamun: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement. |
| 15 | Taking down existing Cupboard shutter of any description and supply & fixing factory made 20mm thick solid WPC( wood particle composite) sheet one side UV printed( of pattern as approved by GE) and other side wood nature colour for cupboard/cabinet shutter of density 600 Kg/Cbm bent 90 degree including 100% termite/ water proof, fire redardent, eco friendly and finish at all edges at level etc. complete all as specified and directed by engineer-in-charge. |
| 16 | S&F in repair factory made 20mm mm thick solid WPC(wood composite) without prelam sheet having both side wood nature color for cupboard partition/slabs of density 600Kg/Cbm bent 90 degree including 100% termite/ waterproof, fire redardent, eco friendly, complete all as specified and directed by engineer-in-charge. |
| 17 | Supply and fixing Mortice lock, vertical type 2 lever size 65 mm mild steel body complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 19 | S & F Continuous (piano) hinges,mild steel, bright finish Width of flapsequal to shutter thickness complete all as specified and directed by engineer-in-charge. |
| 20 | M&L for 0.80mm thick PVC edge binding tape around the 18 to 20mm thick PVC shutter, edge color as directed complete all as specified and directed by engineer-in-charge. |
| 21 | M&L high quality magnet catcher for cupboard shuttter, complete all as specified and directed by engineer-in-charge. |
| 22 | S&F 100mm long (12Gauge) butt hinges stainless steel anodised and fixed all as specified NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 23 | S&F 300mm long Stainless steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, bolts and sliding bolts complete all as specifed and directed by Engr-in-Charge |
| 24 | S&F in repair with screws or welding, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate and complete all as specified. |
| 25 | S&F Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 26 | S&F Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 27 | S&F Stainless steel Tower Bolt of 100 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 28 | S&F Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 29 | S&F in repair Drapery curtain rod of stainless steel 20mm dia complete with bracket heavy duty and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw and disturbed area to be made good with existing finishes complete all as specified as directed by Engineer-in-Charge |
| 30 | S&F in repair Stainless steel rod for cupboard shutter for hanging cloth including two nos braket of approved quality complete all as specified as directed by Engineer-in-Charge |
| 31 | Supply and fixing aluminium door seal up to 1200mm long best quality |
| 32 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.all as specified. |
| 33 | S&F floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor |
| 34 | M & L for Easing of steel window shutters area not exc 2 Sqm each , including adjusting greasing/oiling to easy opening and closing complete all as directed by Engineer-in-Charge. |
| 35 | Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified |
| 36 | M & L for Re securing or easing and adjusting without taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm complete all as specified |
| 37 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width ofaperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 38 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 39 | M&L for providing and injecting chemicals emulsion for post constructional Antitermite Treatement Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre includi |
| 40 | S&F in repair 3mm thick sheet glass ordinery quality and glazing with oil putty with pin in square n exc. 0.50 Sqm in each pane all as specified. |
| 41 | M&L preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer comlplete all as spd and as directed. |
| 42 | M&L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc all as specified |
| 43 | S&F in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing |
| 44 | S&F in repair aluminium die cast body Door closer hydraulically regulated design No2 universal type suitable for door shutter complete all as specified. |
| 45 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 46 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 47 | S&F 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows complete all as specified. Please Enable Macros to View BoQ information |
