Tender For Welcome Maintenance Of Officers Md Accn And Repairs To Flooring, Plastering, Joinery, Glass Panel, Plumbing And Sanitary Fittings And Other Misc Works At Old Naval Park Under Age B/R-I Of Ge (Nb) Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
2 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Of Officers Md Accn And Repairs To Flooring, Plastering, Joinery, Glass Panel, Plumbing And Sanitary Fittings And Other Misc Works At Old Naval Park Under Age B/R-I Of Ge (Nb) Visakhapatnam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-May-2026 | BOQ CORRIGENDUM | BOQ | 05-Jun-2026 |
| 2 | 02-Jun-2026 | DATE CORRIGENDUM | Date | 12-Jun-2026 |
| 3 | 26-May-2026 | BOQ CORRIGENDUM | BOQ | 12-Jun-2026 |
| 4 | 11-Jun-2026 | DATE CORRIGENDUM2 | Date | 19-Jun-2026 |
| 5 | 18-Jun-2026 | DATE CORRIGENDUM3 | Date | 26-Jun-2026 |
| 6 | 25-Jun-2026 | DATE CORRIGENDUM4 | Date | 04-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- (a) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (b) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer |
| 2 | M & L for preparing old decorated surfaces of wall including cornices, pilasters etc, including bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of oil bound/acrylic distemper complete all as specified and directed.(Note: Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS) |
| 3 | M & L for preparing old decorated surfaces of walls including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 4 | M & L for preparing old decorated surfaces of ceiling including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 5 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 6 | M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 7 | M & L for Preparation of old treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and making smooth surfaces with sand paper and cleaning and filling with wood filler and applying two coats of synthetic varnish over a coat of wood filler liquid transperant complete all as specified and directed. |
| 8 | M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 9 | M & L for preparing newly plastered surfaces of wall and applying two coats of oil bound washable distemper over a coat of primer including applying one or more coat of wall care putty to get a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 10 | M & L for preparing old decorated surfaces of wall including cornices, pilasters etc, including bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of smooth interior acrylic Plastic emulsion paint complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 11 | M&L for preparation of new platered surface of wall and applying two coat of smooth interior acrylic Plastic emulsion paint over a coat of primer complete all as specified and directed. Note : Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 12 | M&L for preparation of new surface of celling of any description and applying two coat of smooth interior acrylic Plastic emulsion paint over a coat of primer complete all as specified and directed. Note : Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 13 | M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed. |
| 14 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed |
| 15 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 16 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 17 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 18 | M & L for preparing old decorated surfaces of wall including cornices, pilasters etc, including bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 19 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 20 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 21 | Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed. |
| 22 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. |
| 23 | Taking down shutters of any description exc 2 Sqm each complete all as specified and directed. |
| 24 | S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 25 | M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed. |
| 26 | S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. |
| 27 | S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | S & F 30 mm thick, factory made, Second class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, etc.; sizes of members of shutters as specified in SSR Part I complete all as specified and directed |
| 29 | S & F 35 mm thick, factory made, glazed/skeleton shutters with first class hard wood, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I complete all as specified and directed |
| 30 | S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters as in window open rebated and prepared to receive glass, gauge, etc(without sash bar), divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified. |
| 31 | S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 32 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 33 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 34 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 35 | S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 36 | S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 37 | S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 38 | S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 40 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 41 | S & F 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 42 | S & F 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed. |
| 43 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 44 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 45 | Taking down aluminium shutter and frame, exe 1.5 but n.exc. 4 Sqm in each complete all as specified and directed. |
| 46 | Taking down aluminium shutter and frame, n.exe 1.5 in each complete all as specified and directed. |
| 47 | S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm). |
| 48 | S & F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed. |
| 49 | Providing and fixing factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber. Frame (112mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+/-0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 50 | S&F in repairs Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed. |
| 51 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description n.exc 1 Sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed. |
| 52 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 1 Sqm but n.exc 2 sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed. |
| 53 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 2.0 Sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed. |
| 54 | S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | S & F in repair 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 56 | S & F in repairs 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 57 | S & F in repairs 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 58 | S & F in repairs 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 59 | S & F in repair 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 60 | S & F in repairs 125 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 61 | S & F in repairs 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed. |
| 62 | S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed. |
| 63 | S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 64 | Taking down existing locking system contains any numbers of levers, replacing the stucked/ damaged levers and applying oil/grease to all part and making full functional properly and re-fixed in position complete all as specified and directed. |
| 65 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed. |
| 66 | S & F in repairs 100 mm, 6 lever, Brass, Mortice Lock, vertical type with two keys complete all as specified and directed. |
| 67 | S & F in repairs, 75mm size, night latch with two levers, brass body, polished bright; vertical type with brass knob or lever handle and fixed complete all as specified and directed. |
| 68 | S & F in repairs 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed. |
| 69 | S & F in repairs, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 70 | S & F in repair fancy type brass magic eye for doors complete all as specified and directed. |
| 71 | S & F in repairs, acrylic PVC bathroom cabinet of size 350 x 450x100 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves in side the cabinet of superior quality as approved. (Make: Prayag Cat No. 551 or equivelant of make as per manufacturer's list) |
| 72 | S & F in repair 20 mm dia, Aluminium anodised, curtain rod with bracket complete all as specified and directed. |
| 73 | S & F in repairs 25 mm dia, stainless steel, fancy curtain rod, heavy duty, 2 to 3mm thick including stainless steel bracket of superior quality for each opening/door/window etc complete all as specified and directed. |
| 74 | S & F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 75 | S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed with screws complete all as specified and directed. |
| 76 | Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed. |
| 77 | S & F 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed. |
| 78 | S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 79 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 80 | S & F 4 mm thick, sheet glass, ordinary quality and glazing to aluminium window not exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of glazing beads included with the respective items of shutter) |
| 81 | S & F 4 mm thick, sheet glass, ordinary quality and glazing to aluminium window exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of glazing beads included with the respective items of shutter) Please Enable Macros to View BoQ information |
| 82 | S & F 4 mm thick, sheet glass, ordinary quality and glazing to aluminium window exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of glazing beads included with the respective items of shutter) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 12, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 12, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 19, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 26, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days