|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8108/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: Repairs and day to day maintenance wooden / MS / Aluminium Joinery and other misc B/R works of OTM/ MD Accn Bldgs at MH/ MD area of AGE B/R-II under GE Golconda Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Taking down old wooden glazed shutter n exc 1 sqm each complete from frame and refixed the same after necessary repair/rebeting/ fixing wire mesh/glass(wire mesh / glass measured separately) complete all as specified and directed. |
| 3 | Taking down old iron glazed shutter complete from frame and refixed the same after necessary repair/welding/rebeting/ fixing wire mesh/glass(wire mesh/glass measured separately), area of shutter n exc 1 sqm each complete all as specified and directed. |
| 4 | M&L for welding in repairs hinges , handle , lock , tower bolt , sliding bolt ,rat rail , peg stay ,peg set , exc 6mm and not exc 9 mm in thickness. by welding etc complete all as specified and directed. |
| 5 | Taking down old aluminium shutter complete from frame and refixed the same after necessary repair, (prelaminated particle board / glass / lock / handle measured separately) area of shutter exc 1 sqm but not exc 2 sqm each complete all as specified. |
| 6 | Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified and directed. |
| 7 | Taking down / hacking out old broken glass (any thickness, size, quality or description) from shutters of any description glazed with putty or fixed with beads complete all as specified and directed |
| 8 | Taking down old unserviceable tower bolts / handles / hinges / sliding bolts / door stoppers of any description complete all as specified and directed. |
| 9 | S&F in repair stainless steel wire cloth in shutters of any description, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed. |
| 10 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed. |
| 11 | S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 12 | S&F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 13 | S&F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 complete all as specified. |
| 14 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified. |
| 15 | S&F 100 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified. |
| 16 | S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified. |
| 17 | S&F 125 mm length of brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified. |
| 18 | S&F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified. |
| 19 | S&F 100 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified. |
| 20 | S&F 125 mm length of extruded brass handles, fabricated type polished complete all as specified. |
| 21 | S&F 300mm length aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spfd. |
| 22 | S&F 300mm length Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as spfd. |
| 23 | S&F 250mm length stainless steel sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 24 | S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed complete all as specified and directed. |
| 25 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type) |
| 26 | S&F brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type) |
| 27 | S&F 5.5 mm thick glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed. |
| 28 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers |
| 29 | M&L 12mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified |
| 30 | S&F in repair Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified |
| 31 | S&F 12mm thick toughned plain glass with frosted designer film as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 32 | M&L in repair 18mm thick plywood, grade 1 (with BWR resin) with one face veneered decorative fixed with brass screws and cups to timber frame work complete all as specified and directed. |
| 33 | S&F in repair Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and directed. |
| 34 | S&F in repair Double action brass spring hinges, with phosphor bronze wire spring of size 100mm, bright polished etc complete all as specified and directed. |
| 35 | S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed |
| 36 | S&F stainless steel wardrobe hooks (single) 50mm to 60mm complete all as specified and directed |
| 37 | S&F brass drawer pulls, 4 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed. |
| 38 | Material & Labour for providing and fixing stainless steel (Grade 304) in railing, curtain rods etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 39 | S&F in repair of 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and directed. |
| 40 | S&F in repair fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and directed. |
| 41 | S&F in repairs Aluminium extruded section Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified |
| 42 | S&F in repairs double action floor spring hudraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down old spring and fixing neccessary supporting parts and making good with pcc and white / black cement on top complete all as specified and directed |
| 43 | Supply & Fix in repair stainless steel kitchen plate rack ( non magnetic type ) made of 0.85 mm thickness sheet of size 31'' x 36'' x 10'' complete all as specified and directed. |
| 44 | S&F in repairs bath room cabinet with mirror PVC size 450x350mm complete all as specified and directed. |
| 45 | S & F in repair 600x450mm beveled edge mirror of selected quality glass mounted 6mm thick AC/ply board fixed to wooden plugs with CP screw and cup of washer complete all as specified and directed. |
| 46 | S&F in repair Vitreous China soap dish approximate size 160x 160x90mm embedded in the wall complete all as specified and directed. |
| 47 | Taking out the rolling shutters of any size, incl top cover guide channel etc carrying out repairs and re-fixing the same with applying grease etc (New material provided except safety lever locks, ball bearings, gears lath and top cover shall be measeured and paid separately ) complete all as specified and directed. |
| 48 | S&F in repairs Lath 1.25 mm thick & 75 mm wide for rolling shutter complete all as specified and directed. |
| 49 | S&F in repairs suitable spring for rolling shutter complete all as specified and directed. |
| 50 | S&F in repairs Guide rail of any size of rolling shutter complete all as specified and directed. |
| 51 | S&F in repairs Ball bearing of any size for rolling shutter complete all as specified and directed. |
| 52 | S&F in repairs top cover for rolling shutter complete all as specified and directed. |
| 53 | Taking down cement or cement lime plaster on brick wall / stone walls/concrete surfaces, ceilings etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 54 | M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 55 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surfaces complete all as specified and directed. |
| 56 | Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work, complete all as specified and directed. |
| 57 | M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed. |
| 58 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed. |
| 59 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed. |
| 60 | Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed. |
| 61 | Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed. |
| 62 | Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed. |
| 63 | M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius all as specified. |
| 64 | M & L half Brick wall with old size fly ash bricks straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and directed. |
| 65 | M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed. |
| 66 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 67 | S & F Window guard bars, plain, let in and fixed independently in wodden frames, L or T section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified. |
| 68 | M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and directed. |
| 69 | S & F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, with both faces is covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 70 | M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 71 | S & F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and mitred beads or rebated sash bars for securing glass or gauge etc. complete all as specified and directed. |
| 72 | S & F 30 mm thick 2nd class hard wood glazed and skeleton shutter of divided into square, with plain chamfered or rounded mitred and rebital sash bar any number and framing moulded windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and directed. |
| 73 | S&F Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 47mm x 20mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills, fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, Glazed Shutter section cut to length and mitre joint with corner bracket having lipping to cover the corners. Elixir, NCL or equivalent stay, handles, 2nos of heavy duty stain less steel pivot hinges, 2no’s towerbolts shall be provided per shutter. The windows should be paneled with 4mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work.all as specified and directed. |
| 74 | Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D\\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6\\" pitch complete for finished item of work.(Make : NCL / ELIXIR METFORM PVT LTD or Equivalent) |
| 75 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening etc complete all as specified and directed. |
| 76 | M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specified and directed. |
| 77 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 78 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 79 | S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing, etc complete all as specified and directed. |
| 80 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 81 | S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete, as specified and directed. |
| 82 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge |
| 83 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and directed. |
| 84 | S&F steel ventilator with top hung double shutter including hinges, steel peg stay complete all as specified and directed. |
| 85 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410 -W (GdeE- 250)qualityA |
| 86 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (GdeE- 250)qualityA |
| 87 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 88 | M&L Weather boarding of 2nd class H.W of 20mm to 25mm thick and rebated of thick edge to give 20mm lap and fixed with screws/nails including one coat primer and two coat synthetic enamel paint complete all as specified and directed. |
| 89 | M&L preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel painting complete all as specified and directed. |
| 90 | M&L preparation of old painted surface of Steel and iron work of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 91 | M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 92 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide new or untreated steel surfaces exc 10 cm in width or girth including preparation complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
