|
| 1 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete complete all as specified and directed. |
| 2 | Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete complete all as specified and directed. |
| 3 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed. |
| 4 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and directed. |
| 5 | S&F powder coated coloured (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 6 | S&F for powder coated coloured (powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 7 | S&F For framed work like grills grating, etc with ends of bars shouldered and/ or riveted or forged x spikes, framed guard bars beraed iron doors, ladders framed balusters work ways railing, frame work for water tanks and sililar work conforming to F.e 290 Gde-E-165 complete all as specified and directed. |
| 8 | M&L for 5.5 mm thick sheet glass ordinary quality and glazing with wooden beading in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 9 | M&L for 12 mm thick toufan glass ordinary quality and glazing with wooden beading in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 10 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 11 | M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed. |
| 12 | M&L for 12MM plywood, grade BWR, type BB, Fixed with screws to timber frame work complete all as specified and directed. |
| 13 | S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 14 | M&L Precast cement concrete block masonry with solid block exc 10 Cm in width with PCC, type C1 (1:3:6) using 20mm graded stone aggregate) and setting in CM 1:6 including dismantling of existing surface complete all as specified and directed. |
| 15 | Taking down plastering on lathing (other than wire-netting),without removing lathing, in lime or cement mortar (one side only measured in cases where both sides are plastered complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick on fair faces of lathing wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for rendering 15m thick on fair faces of lathing wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for 5 mm thick rendering in cement mortar 1:3 ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 19 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 20 | M&L for new surfaces and applying two coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed. |
| 21 | M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and directed. |
| 22 | M&L for preparation of surfaces and applying water prove putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 23 | M&L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint ver roof sheet bldg ht 6 to 9 mtr complete all as specified and directed. |
| 24 | M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and directed. |
| 26 | Complete removal of existing wall treatment surface and applying two finishing coat of cement type emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including 1mm water prove wall care putty and alkali resistant priming paint on old surfaces complete all as specified and directed. |
| 27 | M&L for Non skid coloured ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:4 including dismantling of existing surface complete all as specified and directed. |
| 28 | M&L for polished Vitrified tile ultra charge , 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 ( 600x600) sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:4 including dismantling of existing surface complete all as specified and directed. |
| 29 | Ditto all as per item No above but over 10mm thick rendering in CM 1:4 as in skirting complete all as specified and directed. |
| 30 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 31 | M&L in repair for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 32 | M&L in repair for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 33 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 34 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 35 | S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed. |
| 36 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 37 | M&L for broken brick, Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 38 | M&L 75 mm PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc complete all as specified and directed. |
| 39 | M&L for PCC coping (1:2:4) type B-1 (using 20mm graded stone aggregate complete all as specified and directed. |
| 40 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 41 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 42 | Excavtion over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 43 | Excavtion over areas not exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed. |
| 44 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft loose soil complete all as specified and directed. |
| 45 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil complete all as specified and directed. |
| 46 | M&L for Boulder pitching, laid dry, hand packed tightly including pitching is grouted with cement and sand mortar 1:6 complete complete all as specified and directed. |
| 47 | M&L for Selecting stone, brick, concrete, etc. suitable for handpacking, filling of hardcore from excavated spoil heaps, removing and piling in convenient places within 50m of spoil heaps, etc. and raising for wall and required level to form embankments complete As obtain from Item No-2 complete all as specified and directed. |
| 48 | Supply only 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a complete all as specified and directed. |
| 49 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, PVC conduit on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch including taking down existing Point wiring complete all as specified and directed. |
| 50 | Description all as per Srl item No. 49 here in before but for one bell point controled by one bell push complete all as specified and directed. |
| 51 | Description all as per Srl item No 49 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 52 | Description all as per Srl item No. 49 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 53 | Description all as per serial item No 49 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 54 | Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 55 | Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 56 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 57 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 58 | Supply and fixing Bell push, flush type, 5 amp 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 59 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked complete all as specified and directed. |
| 60 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed. |
| 61 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 62 | S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified. |
| 63 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 64 | S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 65 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule complete all as specified and directed. Note : Copper thimble shall be used for connection of cable . |
| 66 | Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 67 | Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down old unserviceable one including MCBs complete all as specified and directed. |
| 68 | Supply and fix MCB TPN 40-100 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed. |
| 69 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and directed. |
| 70 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed. |
| 71 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and directed. Please Enable Macros to View BoQ information |
