|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each complete all as specified and directed. |
| 3 | Hacking out old broken glass of (any thickness, size or description) from old wooden frame, or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed. |
| 4 | S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 5 | S & F stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed . |
| 6 | M & L for factory made 35 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc. |
| 7 | M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 8 | M & L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 9 | S & F of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 10 | S & F of 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 11 | M & L two coats of synthetic enamel painting on woodenl surfaces exc 10 cm width or girth over one coat of pink primer including preparation of new steel surfaces. |
| 12 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 13 | Taking down shutters of any description area of each shutter exc 1.00 Sqm each but n exc 2 sqm resecuring or easing & adjusting and refixing in the same opening of any description. |
| 14 | Taking down shutters of any description area of each shutter exc 1.00 Sqm each but n exc 2 sqm and removing to store of any description. |
| 15 | Supply only stainless steel plate rack 0.8mm thick of capacity carrying minimum 10 plates and minimum size 90 x 60 x 25 cm complete all as specified and directed. |
| 16 | Supply only Glass shelf 500x125mm complete all as specified and directed. (Make : Prayag Cat Part No BEA 45) or equivalent as approved by GE. |
| 17 | Supply only ISI marked waste coupling 32mm /40mm dia of brass chromium plated for glazed ware sink, basins etc with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed. |
| 18 | Supply only 32mm dia PVC waste pipe for sinks/basin complete all as specified and directed. |
| 19 | Supply only 40mm dia PVC waste pipe for sinks/basin and complete all specified and directed . |
| 20 | Supply only grating doom 125mm/100mm/75mm dia of SS with waste hole complete all as specified and directed. |
| 21 | Supply only PVC connection pipe 450mm long with PTMT nuts suitable for 15mm dia pipe etc complete all as specified and directed. |
| 22 | Supply only PVC connection pipe 600mm long with PTMT nuts suitable for 15mm dia pipe etc all as specified and directed. |
| 23 | Supply only ISI marked fancy type Pillar tap of 15mm bore, cast copper alloy with capstan heads chromium plated screwed down , high pressure with long screwed shanks and fly nuts , screwed for iron pipe complete all as specified and directed. |
| 24 | Supply only 15mm bore chromium plated Bib taps cast copper alloy screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 25 | Supply only Toilet paper holder of brass chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed . |
| 26 | Supply only 25mm dia fancy stainless steel curtain rod with bracket including all necessary fittings such as knobs etc complete all as specified and directed. |
| 27 | Supply only 15mm dia angle valve cast copper alloy , chromium plated with long shank and cup (concealed type) complete all as specified and directed. |
| 28 | Supply only for plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 29 | Supply only Hasp and staple , safety type , brass with mild steel hinge pin including bolt to hinge plate and fixed with screws of 75mm complete all as specified and directed. |
| 30 | Supply only 40mm dia cupboard knobs fixed with nuts, screw and washer of brass polished, bright finished complete all as specified and directed. |
| 31 | Supply only Hat and coat hooks, solid body, 175mm to 250 mm of brass complete all as specified and directed. |
| 32 | Supply only 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed. |
| 33 | Supply only floor door stopper brass body and tongue with hard drawn steel spring complete, overall length of cover plate 150 mm complete all as specified and directed. |
| 34 | Supply only soap dish 160x160x90mm, chromium plated type fixed to plugs with chromium plated brass screwed complete all as specified and directed. |
| 35 | Supply only CP ABS body Health Faucet with 1.2m flexible tube & hook complete all as specified an directed. |
| 36 | Supply only 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed. |
| 37 | Supply only Jet spray chromium plated with 1mtr heavy with chromium plated nuts complete all as specified and directed. |
| 38 | Supply only PVC bathroom cabinet standard quality and size 432x311mm complete all as specified and directed . |
| 39 | Supply only sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm |
| 40 | Supply only bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (minimum wt. 90gms). |
| 41 | Supply only Stop cock (Concealed) cast copper alloy chromium plated screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed. |
| 42 | Supply only swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed all as specified (Minimum wt 40 Gms) |
| 43 | Supply only swivel shower rose 100mm of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed. |
| 44 | Supply only vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed. |
| 45 | Supply only 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. |
| 46 | Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 47 | Taking up or down existing GI Tubing 20 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed |
| 48 | S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA) 20 mm dia complete all as specified. |
| 49 | Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge. |
| 50 | Supply only 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed. |
| 51 | Supply only 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed. |
| 52 | Supply only 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed. |
| 53 | Supply only designed looking mirror size 600X450 mm with PVC beading of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 54 | Dismantling boarding of any discription fixed in any position with nails complete all as specified and directed. |
| 55 | S&F for factory made 18 mm thick WPC solid board of density 600 Kg/cum as in cupboard shelves, partitions, sides of cupboard & drawers with collapsible handle & with wardrobe/ finch lock, including powder coated aluminium cleat of size 25X25X3mm(colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastener, also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern/colour of lamination to be approved by GE. |
| 56 | Attending plumbing complaints only fixing item in repair and rectify defects i.e. flushing leakage from down pipe, flush handle , PVC connection, stop valves, leakage of bib taps, wall mixer, basin mixer, stop/angle cock, pipe line leakages, float valve, tank replacement etc including provision of all types of washers , thread , rubber cone, M-Seal, Spindle for Bib tap/Stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed . |
| 57 | Attending carpenter complaints only fixing item in repairs and rectify defects i.e. tightening of loose door/window/cupboard hinges and refixing of loose sliding bolts/tower bolts/handles, refixing of loose pelmet & curtain rod /brackets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plants and made functional to entire satisfaction complete all as specified and directed . |
| 58 | Supply only flushing cistern kit different size and make including fittings of day to day complaints complete all as specified and directed. |
| 59 | Supply only flushing cistern syphon kit single piece , EWC different size make including fittings of day to day complaints complete all as specified and directed. |
| 60 | Supply only 75 mm SS butt hinges medium weight and fixed complete all as specified and directed. |
| 61 | Supply only 100 mm SS butt hinges medium weight and fixed complete all as specified and directed. |
| 62 | Supply only 150 mm long stainless steel grade 304 handles oval type medium weight (min 3.00 mm thick) complete |
| 63 | Supply only 200 mm long stainless steel barrel tower bolts and fixed as specified and as directed. |
| 64 | S& F factory made single extruded WPC (wood polymer composite) solid door/window / ceosetory windows and other frames/chowkhat of size 40*70mm comprising of virgin PVC polymer of K value 58-60(suspension grade),calcium carbonate and natural fibres (wood powder/rice husk) and non toxic additives(max toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 N(Face) and 1100 N(Edge) min compressive strength of 58 N/mm2 modulus of elsticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per dir of engineer-in charge(M.S hold fast/lugs or SS dash fasteners shall be paid for separately) |
| 65 | S&F factory made single extruded WPC(wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(suspension grade) calcium carbonate and natural fibres(wood powder/rice husk)and non toxic additives(max toxicity index of 12 for 100 gms)having min density of 650 kg/cum and screw withdrawl strength of 1800 N(Face) and 900 N(Edge) min compressive strength of 50N/mm2 modulus of elsticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per dir of Eng-in charge |
| 66 | Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed. |
| 67 | M&L brick work with sub class B bricks (except bricks) burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 68 | M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 69 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates of frame also include rate for anodised aluminium hard ware such as aluminium angles/cleat, handles, tower bolts, locking arrangement, indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames. |
| 70 | S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedd. Make : Make of aluminium section as approved by GE and Make of aluminium fittings as approved by GE. |
| 71 | S&F 4.8 mm thick sheet glass, tinted quality and glazing in square or recangular shape area exc 0.5 sqm in each pane fixed with rubber gasket, aluminium beading & aluminium clips with frame made of aluminium section including making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 72 | S&F of 12 mm thick toughned glass door fixed with SS hinges, partitions automatic doors and similar work including cutting to shape, drilling holes including necessary SS hinge or SS cleat complete all as specified and directed. |
| 73 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.complete all as specified and directed. |
| 74 | M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement |
| 75 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement |
| 76 | M& L for two coat of oil bound distemper including 2.00 mm thick wall care wall putty incl preparation of new surface/complete removal of old surfaces of wall complete all as specified and as directed. |
| 77 | S & F of 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) |
| 78 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and as directed. |
| 79 | Supply only fancy type stainless steel towel rack size 600mm including a pair of brass bracket etc complete all as specified and directed. |
| 80 | Supply only stainless steel tubular towel ring square shape including a pair of CP brass brackets complete all as specified and directed. |
| 81 | Supply only fancy type 150mm size square brass CP Shower rose all as specied and directed. |
| 82 | Supply only Brass chromium plated wall mixer 2 in 1, 15mm for mixing hot and cold water screwed down 3/4 hole and connecting to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. |
| 83 | Supply only Brass Aluminium Mortice lock 4 lever , size 75mm as all specified and directed |
| 84 | Supply only door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 85 | Supply only double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed |
| 86 | Supply only brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repair for 32mm bore complete all as specified and directed. |
| 87 | S & F of service tank lid/cover (MS tasla) of size 0.45m dia and 0.2m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity including necessary nut, bolts, washers and locking arrangement complete all as specified and directed. |
| 88 | Supply only 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms). |
| 89 | Supply only CP towel rail 20mm dia, D Type 450/600 mm long between flanges etc complete all as specified and directed. |
| 90 | S & F of 1.50 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 91 | S & F of 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed. Please Enable Macros to View BoQ information |
