Tender For Repair/Renovation & Sanitary Fittings Of Lodgement Centre.( Panjgrain Community Hall And Sarv Shakti Chandi Mata Mandir, Dhammi ) Block Nagrota Under The Scheme Sanjy For The Year 2026-27, Jammu-Jammu And Kashmir
TDR : 55515249
Tender Notice
BOQ
3 Days Left
Jammu
Jammu And Kashmir
Tender For Repair/Renovation & Sanitary Fittings Of Lodgement Centre.( Panjgrain Community Hall And Sarv Shakti Chandi Mata Mandir, Dhammi ) Block Nagrota Under The Scheme Sanjy For The Year 2026-27
Name of Work:- Repair/Renovation & Sanitary Fittings of Lodgement Centre.( Panjgrain Community Hall and Sarv Shakti Chandi Mata Mandir, Dhammi ) Block Nagrota under the scheme SANJY for the year 2026-27
Sl. No.
Item Description
1
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4 Cast in situ c.concrete 1:5:10 using 40 mm nominal size stone aggregate.
2
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4 Cast in situ c.concrete 1:3:6 using 20 mm nominal size stone aggregate.
3
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
4
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge
5
9.120.2 30mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 60x30mm and wall thickness 2mm +/- 0.2mm with inbuilt decorative moulding edging on one sides. The styles and rails mitred and joined at the corners and by means of MS galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC hollow section of size 100x30mm and 2mm +/-0.2mm wall thickness fixed to the shutter styles by means of plastic/galvanized MS ‘U’ cleats. The shutter frame filled with UPVC multi-chambered single panels of size not less than 620mm, having over- all thickness of 20mm and 1mm +/0.1mm wall thickness. The pannels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized MS rod and fastened with nuts and washers, complete as per manufacturers’ specification and direction of engineer-in-charge.
6
Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance+/-1mm with wall thickness 2.0mm +/-0.2mm, corners of the door frame to be joined with galvanized brackets and stainless steel screws, joint mitred and plastic welded. The hinges side vertical of the frames reinforced by galvanized MS tube of size 19x19mm and 1mm +/-0.1mm wall thickness and three numbers stainless steel hinges fixed to the frame complete as per manufacturers’ specifications and direction of engineer-in-charge) 9.119.1 Extruded section profile size 48x40mm
7
Carriage of key construction material from source to site of work by Mechanical Transport , Sand & Agg. avg. 10.0 km lead by MT
8
Add Cost of Sign Board including painting and writting complete job. For Four Locations Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
