|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil : |
| 2 | Providing and laying of drty soling hand packed, in foundation and trenches including all carriages complete job |
| 3 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.6 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : lime putty : 6 coarse sand) 6.1.4 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 6 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for:. 5.9.3 Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for:5.9.1 Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for:5.9.16 Edges of slabs and breaks in floors and walls5.16.1.1 Under 20 cm wide |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level5.22.5 Hard drawn steel wire fabric |
| 12 | Dry random rubble masonry with hard stone in foundation and plinth:7.3.1 With bond stone. |
| 13 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 14 | P/F of coloured cgi sheets fro doors complete job 0.5 mm thick |
| 15 | 12mm Cement plaster of mix:13.1.2 1 : 6 ( 1 cement : 6 fine sand) |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.11.3.2 40mm thick with 20 mm nominal size stone aggregate. |
| 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 18 | Floor Tiles |
| 19 | Carriage of various materials from source to WS by MT and HLCarriage of Sand Avg lead 15 km by MT |
| 20 | Carriage of Stone aggregates Avg lead 20 km by MT |
| 21 | Carriage of Bricks Avg lead 20 km by MT |
| 22 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 18.1.3 Stainless Steel AISI- 304 |
| 23 | Providing and fixing rectangular high density polycthylene water storage loft tank with cover, con colour of opa2que white or as approved by Engineer in Charge. The rate includies making necessary holes for inlet, outle and over flow pipes. The base support i/c fittings |
| 24 | EXTERIOR FINISHINGFinishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 25 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.19.2.2.1 PN-16 pipe, 16mm OD(SDR-7.4) |
| 26 | P/F Door TEE 10mm dia PVC of approved make Type B |
| 27 | P/F soil waste and vent pipes IS 13592 & suitable to rubber ring joints which includes bends, rubber rings jointing junctions etc all fittings complete job 110mm dia PVC SWR pipes complete job Type B |
| 28 | P/F soil waste and vent pipes IS 13592 & suitable to rubber ring joints which includes bends, rubber rings jointing junctions etc all fittings complete job 75mm dia PVC SWR pipes complete job Type B |
| 29 | P/F PVC cowel over vent pipe of approved quality Type B |
| 30 | P/F 100 * 75 mm reducer Pvc of approved quality |
| 31 | Floor Trap 110 mm |
| 32 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required :.18.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 33 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 34 | P/F brass bib cock of approved quality 15 mm dia of standard brand |
| 35 | P/F brass angle value of approved quality |
| 36 | P/F gun metal gate valve of approved quality 20 mm nominal board |
| 37 | Providing and fixing of PTMPT soap dish holder having length of 138mm breadth 102mm height 75mm with concealed fitting arrangements weighing not less than 106 gms |
| 38 | mirror of superior glass |
| 39 | Constructing brick masonry road gully chamber of specified size withcommon burnt clay(non modular) bricks of class designation 7.5 incement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: |
| 40 | Surface dressing of gtround not exceeding 15 cm in depth including removing of rack vegetation and inequalities and disposal of rubbish complete job |
| 41 | provoding and laying of stone soling |
| 42 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 43 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .11.29.4 Ordinary cement without any pigment. |
| 44 | Carriage of sand , agregates by MT for an avg lead of 15 km upto SOW |
| 45 | Add for cost of signboard, photographs and other unforseen items |
| 46 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 47 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns |
| 48 | 12mm Cement plaster of mix:13.4.2 1 : 6 ( 1 cement : 6 coarse sand) |
| 49 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.13.70.1 Two or more coats on new work |
| 51 | Carriage of sand, aggregates by MT for an avg lead of 15km upto SOW |
| 52 | Add cost of stainless steel round balls (50 mm dia) complete with base plate and nuts complete job Please Enable Macros to View BoQ information |
