|
| 1 | Supply and fixing of 7 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 130 mm & Base plate 12 mm thick) having 3 mm,thickness with single arm bracket length of 1 mtr. length in l:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect. |
| 2 | Supply and fixing of LED Street light Fitting with mandatory driver set having Presser die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 75 Watt. to 90 Watt.Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved including Labour. (Fixing with 50mm dia -5mm thick MS Pipe Bracket, 02No 135x10-15mmx5mm Clamp for Suitable size for pole of difference size, with 5Meter 2.5mm 02Core Alu Cable, 5Meter 40/76wire, 05Amp Bed Switch & Male-Female connector complete in all respect 9750-11700 system lumens, High Power LED with lenses, >130Lm/W, PF>0,95, THD <10% at full load CRI > 70..Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and restart feature, 4 KV internal Surge Protection and 10KV Externeal Surge Protection, with 5 years warrantee |
| 3 | S/L of Alu conductor PVC insulated armoured served sheathed cable 1100 V grade at depth of 750mm below ground level over a cushionof 75mm thick & arround and protected with burnt bricks on, Protected with burnt bricks on side and on top on surface., The cable run shall be fixed on M. S. Clamps etc.of suitable size or as per direction of E/I. comp. in all resp. The Armouring of the cable, shall be properly connected with the earth conductor by clamps etc. (a) 16sq.mm.4core |
| 4 | S/L of Alu conductor PVC insulated armoured served sheathed cable 1100 V grade at depth of 750mm below ground level over a cushionof 75mm thick & arround and protected with burnt bricks on, Protected with burnt bricks on side and on top on surface., The cable run shall be fixed on M. S. Clamps etc.of suitable size or as per direction of E/I. comp. in all resp. The Armouring of the cable, shall be properly connected with the earth conductor by clamps etc. (b) 35 sq. mm 3-1/2 core |
| 5 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as perdirection of the Engineer-Incharge (a) 16 sq. mm |
| 6 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as perdirection of the Engineer-Incharge (b) 35 sq. mm |
| 7 | Boaring (Buggi) for Cabling work below 3.5mt ground level including HDPE Pipe |
| 8 | S/L of \\"2” PVC/HDPE pipe |
| 9 | Provision of road cutting & repairing the same. |
| 10 | Supply and burring of safe Earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm inner pipe 25, terminal Dia 12 mm, outer GI Pipe of 16 swg and inner GI Pipe of 12 swg with hot Dip Galvanization up to 100 micron filled with crystalline conductive Mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I frame with hinged Cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I strip will be extra) |
| 11 | S/F 40Amp. TPN automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO-100 series with contractors HRC fuses isolating switch metering instrument & instrument box with CTS etc. in case of TPN, complete in all respect. Please Enable Macros to View BoQ information |
