|
| 1 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift from 1.5 metre to 3.0 metre) By Mechanical Means |
| 2 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift from 1.5 to 3.0 metre) By Mechanical Means |
| 3 | Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etcetra complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish Indian Standards to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 5 | Providing and laying in situ /Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions Etcetera including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish Indian Standards to be provided (Excluding reinforcement and structural steel) Etcetera complete, with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 8 | Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Etcetera Complete. |
| 9 | Providing and casting in situ / ready mix Plain Cement Concrete Mix20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing Etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Supervisory Control and Data Acquisition with fine agreegates of required specifications (Natural sand / Verticle Shaft Impactor sand finely washed Etcetera ) |
| 10 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 11 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down Etcetera complete. |
| 12 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) Etcetera complete. |
| 13 | Providing and fixing in position Thermo Mechanical Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches Etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 14 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 milimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 milimetre in thickness. |
| 15 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed Etcetera complete. (By /manaual Means) a) Upto 1.50 metre lift Normal Rate |
| 16 | Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed Etcetera complete. a) Upto 1.50 metre lift Normal Rate |
| 17 | Excavation for foundation in hard rock by controlled blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed Etcetera complete. a) Upto 1.50 metre lift Normal Rate |
| 18 | Dewatering on Brake Horse Power basis by using water pump including diversion of stream, providing cofferdams, earthern bunds Etcetera as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 Brake Horse Power pump Etcetera complete. (prior approval of Superintending Engineer will be necessary) |
| 19 | Providing and laying in situ / ready mix / ready mix Mix-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing Etcetera complete. (with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) |
| 20 | Providing and laying in situ / ready mix Mix-30 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings Etcetera including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in Cement Mortar 1:3 Etcetera complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in followinh manners (a) Height upto 5 metre (With Concrete Mixer)With fine agreegates of required specifications ( Verticle Shaft Impactor sand finely washed Etcetera ) i) Height up to 5 metre, normal rate. |
| 21 | Providing expansion joints with 25 milimetre thick bituminous pad as per detailed drawings Etcetera complete. |
| 22 | Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanical Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings Etcetera complete. |
| 23 | Providing and laying weep holes of 100 milimetre diameter Polynvinyl Cloride pipes as per drawing for abutment returns, return walls Etcetera Complete. |
| 24 | Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of Ministry of Roads Transportation and Highway specifications to a thickness of not less than 600 milimetre with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications Etcetera complete. |
| 25 | Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density Etcetera complete (Material obtained from departmental Land) |
| 26 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 1.5 metre) By Mechanical Means |
| 27 | Providing and laying in situ / ready mix Mix-15 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings Etcetera including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in Cement Mortar 1:3 Etcetera complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in followinh manners (a) Height upto 5 Metre (With Concrete Mixer)With fine agreegates of required specifications ( Verticle Shaft Impactor sand finely washed Etcetera ) i) Height up to 5 metre, normal rate. |
| 28 | Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drain work / retaining walls Etcetera including necessary form work, compaction, finishing and curing Etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Supervisory Control and Data Acquisition |
| 29 | Providing and laying cement concrete pipe of Indian Standards 458:2003 Non Pressure-3 class of 1200 milimetre diameter in proper line, level and slope Etcetera complete. |
| 30 | Providing selected hard murum filling including laying in layers of 15 to 20 centimetre with watering and compacting Etcetera complete. |
| 31 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 1.50 metre) By Mechanical Means |
| 32 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting Etcetera complete. |
| 33 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap/ granite /quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetra complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 34 | Providing and laying Cast in situ/Ready Mixcement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish Indian Standards to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 35 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates Etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade Etcetera complete. |
| 36 | Supply, fixing and installation of 4 milimetre thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 milimetre thick, total thickness of aluminium composite panels not to be less than 4 milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it Indian Standards peeled off). The supporting framework shall be made out of 50 milimetre X25 milimetre X 3 milimetre thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 milimetre X 1200 milimetre and fixed to the building structure as per design through 50mm X50 milimetre X 5 milimetre Mild Steel angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of Superintending Engineer. Indian Standards necessary before inclusion of this item in estimate) |
| 37 | Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Etcetera Complete. |
| 38 | Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetra complete. |
| 39 | Providing and fixing mild steel grill work for windows, ventilators, Etcetera 15 Kilogram per One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 40 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required Etcetera complete. |
| 41 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning , preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days Etcetera complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 42 | Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish Etcetera complete. |
| 43 | Providing and laying vitrified matt fininsh tiles having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standards 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning Etcetera complete. |
| 44 | Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning Etcetera complete. |
| 45 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 Kilogram per One Running Metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 Kilogram per One Running Metre Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 Kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 Kilogram per One Running Metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 Kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 Kilogram per Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetra, complete. With colour Anodising with box |
| 46 | Providing and fixing mild steel grill gate with angle iron frame 65 milimetre x 65 milimetre x 10 milimetre with iron bars at 150 milimetre Center to Center and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram per Square metre. |
| 47 | Laboratory testing ChargesSilt test and Gradetion for Sand |
| 48 | Standard Consistancy Fineness, SpecificGravity, Setting Time (Initial and Final),Compressive Strength, Soundness for Cement |
| 49 | Compressive Strength (Cube Test) for Cement Concrete M-20 |
| 50 | Compressive Strength, Water absorption for Bricks |
| 51 | Standard Consistancy Fineness, SpecificGravity, Setting Time (Initial and Final),Compressive Strength, Soundness for Cement |
| 52 | a) Silt Factore Test for Sand |
| 53 | b) Fineness Modules |
| 54 | a) Water Absorption, Specific Gravity, Impact Value/ Crushing Value for Crushed metal |
| 55 | b) Sieve Analysis for Crushed Metal |
| 56 | d) Flakiness Index & Elongation Index for Crushed Metal |
| 57 | e) Stripping Value for Crushed Metal |
| 58 | j) Water Absorption of Aggregate & Impact Value for Hand Broken Metal |
| 59 | k) Flakiness Index of aggregate for Hand Broken Metal |
| 60 | a) Sieve Analysis for Murum |
| 61 | b) Liquid Limit & Plastic Limit for Murum |
| 62 | a) Upto 16 mm-Tensile Strength, % of Elongation, Yield Stress, Weght Per Meter,Bend / Rebend Test, Proof Stress for TMT Steel |
| 63 | Job Mix for M-15 amd M-30 |
| 64 | Compressive Strength (Kg / Sqm) for Cement Concrete |
| 65 | Compaction Test for Earth Work |
| 66 | Royalty Charges for Sand |
| 67 | Royalty Charges for Other material Please Enable Macros to View BoQ information |
