Name of Work:- tudiqjh dkyksuh esa ,d vnn ,y0bZ0Mh0 gkbZekLV ,oa dkyksuh esa iwoZ esa LFkkfir iksyksa ij 25 vnn 120 okV ,y0bZ0Mh0 LVªhV ykbV dh vkiwfrZ ,oa LFkkiu dk;ZA
Sl. No.
Item Description
1
Supply and fixing of 12.5 mtr. Highmast shaft of approved make with rising system hot dip galvanized inside & outside dip, heaving pole sheet thickness 3 mm. Top dia minimum 150 mm, Bottom dia 310 mm base plate 25mm, thick suitable for wind velocity as per IS 875 part 3& having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxed 0.75 HP power tool motor, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing/site requirement along with foundation bolts nuts, washes anchor plates etc. complete in all respect. PWD SI No.651
2
(Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76 mm inner Dia 38 mm terminal Dia 12 mm, outer GI pipe of 16 SWG and inner GI Pipe of 12 SWG with hot dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs. Activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (from electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. complete. PWD SI No. 725D
3
Supply and laying of aluminum conductor PVC insulated armored served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sided and on Top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. com 16 sq. mm 4 core PWD SI No.-501 (i)
4
Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc. complete in all respect.
5
Supply and fixing of Factory wired integral LED Flood light luminaries with die cast aluminum housing built with driver set suitable for 170 to 200 Watt. Confirming to IP 66 Protection complete in all respect. PWD Sl. No. 1455 CAT-AAA
6
Supply and Fixing Following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PWD SI. No.807 (f) (ii) 40 A TPN
7
Supply and laying of 50 mm. dia heavy gauge (2 mm thick) PVC conduit complete with bend and other accessories as required and 14 SWG fish steel wire etc. In slab along with reinforcement before concreting, and plastering etc. Complete in all respected as-per PWD sch. Of 2018 S.l. No. 285 (A)
8
Supply and fixing of LED Street light fitting having die cast aluminum body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. PWD Sl. No. 1424 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
