|
| 1 | S/F of 6 Amp. To 32 Amp. SP MCB (10KA) C curve Cat-B as per UPPPWD sch No1002 |
| 2 | S/F of heavy duty cadmium plated copper connector with end plate complete in all respects (c) four way connector HKM 100 as per UPPPWD Sch. No. 1128 |
| 3 | Supply & Erection of 8 Mtr. Long GI Octogonal Pole of Approved make having (70mm top dia, 135 mm bottom dia,base plate 12 mm thick) having 3 mm thickness with single arm bracket (1 Mtr. length) on RCC foundation including the cost of foundation, foundation bolts ,excavation & back filling and required T&P complete in all respect as per PWD Sch. No. 643 as per approved make |
| 4 | S/F of crimping, solderless copper tin electroplated lugs of Dowells/Ismail make suitable for 1.5 sq mm to 6 sq. mm cables, including tapping with insulating tape complete in all respects as per UPPWD sch. No. 1129 |
| 5 | Supply & wiring of submain with 3 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site by Engineer I/C as Per UPPWD sch No. 289 (KEI/ Havells/ Grandle/Gloster/Polycab Make ) |
| 6 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (K) 35 sq. mm 3.5 core |
| 7 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (I) 16 sq. mm 4 core |
| 8 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (f) 35 sq. mm |
| 9 | S/F ofpalm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 10 | S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 11 | Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 12 | Supply & Erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuse and The instrument chamber shall be separate and shall comprise of flush type ammeter,voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc complete in all respects. (Incoming 100 Amp., TPN-1 No. & outgoing 63 Amp. TPN-2 Nos.. as per UPPWD Sch. No. 801-a-II |
| 13 | Supply and fixing 25amp. TPN Capacity of Automatic street light cubicle control panel painted with Anti corosive alkali and acid proof paint, consisting of time switch TSO 100 serices/ Digital with ML-4 Contractor, HRC Fuses Isolating switch, metering Instrument & Instrument box with C.T. etc. Complete in all respect's.as per UPPWD Sch. No.807e (ii) |
| 14 | Sypply & laying of 90 mm dia DWC pipe ISI marked along with all accessories like socket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as per DSR 2022 Sch. No. 14.16.2 (only road crossing) |
| 15 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Make as per direction of the Engineer- incharge Catt. AA as per UPPWD Sch. No.1424 Cat -AA (Bajaj, crompton, Philips, Wipro Make) |
| 16 | Supply and fixing of 200 watt factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for confirming to IP 66 protection complete in all respects. Make as per direction of the Engineer- incharge Catt. AA as per UPPWD Sch. No.1455 (Bajaj, crompton, Philips, Wipro Make) |
| 17 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. make as per direction of the Engineer- incharge as per UPPWD Sch. No.652, (Bajaj, crompton, Philips, Wipro Make) |
| 18 | Supply&Fixxing of of UPSIDA LOGO Plate (Retro-reflective) on High Mast including cost of clamp nut & bolts all material men and T&P complete in all respect |
| 19 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level in existing HDPE/DWC/GI Pipe complete in all respects (KEI/ Havells/ Grandle/Gloster/Polycab Make ){as per PWD Sch. No. 501(k) - Sch No. 507} 35 sq.mm 3.5 core (422-170 = 252 Rs.) |
| 20 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level in existing HDPE/DWC/GI Pipe complete in all respects (KEI/ Havells/ Grandle/Gloster/Polycab Make ){as per PWD Sch. No. 501(i) - Sch No. 507} 16 sq.mm 4 core (343-170 = 173 Rs.) |
| 21 | Supply, installation, testing & commissioning of outdoor type Aluminium wound oil cooled transformer of rating 63 KVA, 11/0.433 KV complete as per IS-1180-2014 Level-I as per approved list of UPPCL |
| 22 | Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion.UPSIDC 35.28 |
| 23 | S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. |
| 24 | Supply and erection of Double Pole structure consisting of 410-SP-55,11m long 227 Kg complete steel tubular pole (G.I. Bottom) to be grouted as 1/6th of overall length below ground level with 45 cm dia cement concrete plinth around the pole & 45 cm above the ground level. The foundation of underground will not be less than 20 cm thick layer of cement concrete in the ration of 1:3:6 ( cement : coarse sand : over burnt brick ballast/stone ballast). The brick ballast / stone ballast will be used of 1.25 cm size with stone pad of 30X30X7.5 cm at the base. The cost includes all men and material.UPSIDC schedule No E04A.1.I |
| 25 | Supply and fixing of 11 KV ordinary pole fitting with guarding Channel 2.24 M long instaed of Z clamps including all T&P,men and material for proper completion of work as per SIDC schedule no E03.02 |
| 26 | Supply and fixing of 11KV Disc fitting complete UPSIDC schedule no E03.06 |
| 27 | Supply and fixing of 11KV pin insulator complete UPSIDC schedule no E03.06 |
| 28 | Supply & fixing of danger board fabricated from 10 gauge MS sheet as approved by engineer in charge complete in all respect as per SIDC Sch.No.E27.02 |
| 29 | Supply & erection of stay of Composite mains for ST pole with GI anchor plate (152X152X6mm) stay rod (16mm dia X 1.85 m Iong),GI stay bow (16 mm dia rod,thimble,double stay tightener,clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand,over burnt brick ballast as per direction of engineer in charge complete in all respect as per SIDC sch.No E32.01 |
| 30 | Supply and fixing of anticlimbing device fabricated from G.I. flat of 25 mmX6 mm size in a shape of ring of the pole size,having G.I.flat pointed fins of length 225 mm in 8 nos and also barbed wire in 200 mm length above the said ring including material. UPSIDC E26.01 |
| 31 | S/F of 6 Amp.To 32 Amp. SP MCB (10KA) C curve Cat-B as per UPPWD Sch. No.1002 |
| 32 | S/F of heavy duty cadmium plated copper connector with end plate complete in all respects (c) four way connector HKM 100 as per UPPWD Sch. No.1128 (c) |
| 33 | S/F of ML-4 contactor MDS/L&T make complete including all T&P man and material required for proper completion of work |
| 34 | S/F of mounting time switch (timer clock) L&T/MDS make complete including all T&P men and material required for proper completion of work. |
| 35 | Supply & fixing of driver suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect (Philips, Crompton, Bajaj make) |
| 36 | Supply & fixing of MCPCB with LED & Lance ( 70 to 110 watt) for suitable installed LED street light fittings complete in all respect (Philips, Crompton, Bajaj make) |
| 37 | Supply & Fixing of Glass suitable for installed LED street light fittings complete with rubber gasket etc. complete in all respect |
| 38 | Supply & fixing of LDR suitable for installed LED street light fittings complete in all respect |
| 39 | Supply & fixing of special protection device (SPD) suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect |
| 40 | Dismantaling & Re- Fixing of LED Street Light / Flood Light For Repairing |
| 41 | Cost of all material, spares wire fuses,small accessories required for general maintenance.,cleaning,oiling etc.to keep the entire installation in perfect working order during AMC period complete in all respect |
| 42 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 2 core cable of 1100 v grade complete |
| 43 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete |
| 44 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 35 sq.mm 3.5 core cable of 1100 v grade complete |
| 45 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 70 sq.mm 3.5 core cable of 1100 v grade complete |
| 46 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 2 core cable of 1100 v grade complete |
| 47 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete |
| 48 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 70 sq.mm 3.5 core cable of 1100 v grade complete |
| 49 | Supply and fixing factory wired integral LED flood light luminaires with die cast Al. housing built with dirver set suitable for 110 watt. Confirming to IP 65 Protection complete in all respect. Cat-AA UPPWD Sch No. 1453 |
| 50 | Supply and laying of 16 sqmm. 4 core, aluminium conductor PVC insulated, armoured served, sheathed cable 110 volt garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per UPPWD Sch No. 501(i)&507 (KEI/ Havells/ Grandle/Gloster/Polycab Make ) |
| 51 | Supply & Fixing of 32 mm Dia 1.20 Mtr long G.I Pipe Bracket for fixing of LED lights complete in all respects with clamp etc.UPSIDC |
| 52 | supply & Fixing of LED light strip with RGB colour light complete with driver etc.complete in all respect . (LED Strip light 03 Colour total length 18 mtr , LED Strip Driver 03 No. for each colour ) (Crompton/wipro/philips/Hpl/Bajaj Make ) |
| 53 | Surface mounted outdoor rated luminaire with multi directional beam made of pressure die cast and in anthracite finish. 12W Integrated LED luminaire with min lumen output of 940luman in 3000K. Equivalent Makes: Philips/Iguzzini/Ligman(warranty 3 years against the Manufacturing Defect,Physical damage and 01 Yr Theft from the date of Supply and Installation through Contractor) with M.S Cage for LED Lights |
| 54 | Charges for maintenance ,proper watch and ward of entire electrical system of Street Light and High Mast Tower,cables,conductors,poles,panels etc and all other available material as per direction of engineer in charge for road lightng in IA to cover the general supervision for execution of work including dismantling and re fixing of all street light of UPSIDA during the period of AMC for 12 months (02 Electrican and 02 Helper) |
| 55 | Supply and laying & concealing of 25mm dia ,2mm thick PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P. UPPWD Sch item No. 149(A) |
| 56 | Supply and laying of PVC corrugated conduits of 25 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. UPPWD Sch item No. 185(III) |
| 57 | Supply & laying 10 sq mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. (KEI/ Havells/ Grandle/Gloster/Polycab Make ) Please Enable Macros to View BoQ information |
