|
| 1 | PUMPS Complete dismantling of VT pump by way of:Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts such as discharge and column pipes, shafts and couplings, bowl, suction bell, impeller, stuffing box, fasteners, etc.Single stage pumps with single column pipe > 300mm upto 600mm ND |
| 2 | Fabrication, turning and finishing of specified Stainless Steel (AISI-410 or IS 1570) dia 43 mm and length 1.95 M) line shaft of specified dimensions with end preparation (threaded, etc.), keyway as per old sample having finished weight of 22.23Kgsupto 20.0 kg |
| 3 | Extra per kg >20.0 kg upto 40 kgs |
| 4 | Providing and Fitting of Rubber Bushes to line shaft guide stabilizers |
| 5 | Fabrication, providing and fitting of GM bush to bell mouth (top side) as per sample having finished weight as 2.24 Kgsupto 1.0 kg |
| 6 | Extra per kg >1.0 kg upto 2.5 kgs |
| 7 | Fabrication, providing and fitting of GM bush to bell mouth (bottom side) as per sample having finished weight as 2.24 Kgsupto 1.0 kg |
| 8 | Extra per kg >1.0 kg upto 2.5 kgs |
| 9 | Fabrication, providing and fitting of GM bush to Bowl as per sample having finished weight as 2.24 Kgsupto 1.0 kg |
| 10 | Extra per kg >1.0 kg upto 2.5 kgs |
| 11 | Fabrication, providing and fitting of GM bush to Gland Box as per sample having finished weight as 1.8 Kgsupto 1.0 kg |
| 12 | Extra per kg >1.0 kg upto 2.5 kgs |
| 13 | Providing and fitting of GM split gland as per sample having finioshed weight of 2.5 kgs:upto 1.0 kg |
| 14 | Extra per kg >1.0 kg upto 2.5 kgs |
| 15 | Fabrication, turning, finishing and fitting of Stainless steel (AISI-410 or IS 1570) shaft sleeves (04 Nos) as per old sample, etc. having finished weight of 2 kgs each |
| 16 | Fabrication, turning and finishing (on inside and outside) of Stainless steel (AISI-410 or IS 1030) muff couplings (04 Nos) , etc. as per old sample having finished of 1 kg each |
| 17 | Repairs to Fool valve strainer by providing /fitting the missing bars and welding the mesh properly |
| 18 | Turning an reshaping the stabilizer hole, providing and fitting of CI bush. The job also includes drilling of holes and fitting of rubber bush support using assorted size bolts. |
| 19 | FASTENERSProviding of high tensile steel hexagonal bolts M20 x 100 |
| 20 | Providing of hexagonal nuts of suitable pitch with sizes as under M10 |
| 21 | Providing Fitting of new bearing(NBC/ ARB/ ZKL/ equivalent domestic) bearing No. 29328 E |
| 22 | Complete assembling of all VT pump parts after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. Single stage pumps with single column pipe > 300mm upto 600mm ND Please Enable Macros to View BoQ information |
