|
| 1 | VOLUME V - BILL OF QUANITITY/ PRICE BID Notice Inviting Tender Number: HITES/FM/JIPMER/Civil/2026-27/01 Dated: 15.05.2026 Name of Work : Providing modular kitchen in all quarters of type V quarters, JIPMER, Puducherry. Name of the Vendor : SL NO. DETAILS OF WORK UNITS QUANTITY Rate (Rs.) in figures Rate (Rs.) in words AMOUNT Dismantling |
| 2 | Removal of existing cupboard doors and cupboard racks and shifting the debris out of site |
| 3 | Removal/ Demolition of existing Granite top, kadappa slab shelves, Sink & all plumbing works and shifting the debris out of site |
| 4 | Demolition of cupboard wall projections and ledge walls and shifting the debris out of site Civil Works |
| 5 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 7 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Modular Kitchen |
| 8 | BASE UNIT - in - ELEVATION (A) , (B) & ( c) |
| 9 | Supply & Installation of Modular Kitchen base unit made out of 16mm thick Boiling Water Resistant (BWR) plywood of make Century, Green / Equivalent brand cut to required size at factory and finished with 1mm thick laminate on the outside area and 0.8mm thick laminate on the inside and less visible areas, The Top and doors of the base unit to be done with 16mm BWR ply and the back side of the base unit to be finished with 8mm thick plywood. All laminates are factory pressed and the edge banding to be of thickness 1mm to 1.5mm thick and finished as per approved laminate shade. All material should be free from termite. Cost includes requried accessories like hinges and handles of approved size |
| 10 | WALL UNIT - in - ELEVATION (A) , (B) & ( c) |
| 11 | Supply & Installation of Modular Kitchen wall unit made out of 16mm thick Boiling Water Resistant (BWR) plywood of make Century, Green / Equivalent brand cut to required size at factory and finished with 1mm thick laminate on the outside area and 0.8mm thick laminate on the inside and less visible areas, The Top and doors of the wall unit to be done with 16mm BWR ply and the back side of the base unit to be finished with 8mm thick plywood. All laminates are factory pressed and the edge banding to be of thickness 1mm to 1.5mm thick and finished as per approved laminate shade. All material should be free from termite. Cost includes requried accessories like hinges and handles of approved size. Wall unit installed to the masonry wall using proper concrete screws. |
| 12 | WALL UNIT - in - ELEVATION (C) - GLASS SHUTTER |
| 13 | Supply & Installation of Modular Kitchen wall unit made out of 16mm thick Boiling Water Resistant (BWR) plywood as a frame on all 4 sides and centre partition of thickness 50mm of make Century, Green / Equivalent brand cut to required size at factory and finished with 1mm thick laminate on the outside area and 0.8mm thick laminate on the inside and less visible areas, The Top and doors of the base unit to be done with 16mm BWR ply and the back side of the wall unit to be finished with 8mm thick plywood. All laminates are factory pressed and the edge banding to be of thickness 1mm to 1.5mm thick and finished as per approved laminate shade. Centre Glass to be etched/ frosted glass of thickness 6mm.All material should be free from termite.Cost includes requried accessories like hinges and handles of approved size. Wall unit installed to the masonry wall using proper concrete screws. |
| 14 | LOFT UNIT - in - ELEVATION (C) & (D) |
| 15 | Supply & Installation of Modular Kitchen Loft unit made out of 16mm thick Boiling Water Resistant (BWR) plywood as a frame on all 4 sides and centre partition of thickness 50mm of make Century, Green / Equivalent brand cut to required size at factory and finished with 1mm thick laminate on the outside area and 0.8mm thick laminate on the inside and less visible areas, The Top and doors of the base unit to be done with 16mm BWR ply and the back side of the wall unit to be finished with 8mm thick plywood. All laminates are factory pressed and the edge banding to be of thickness 1mm to 1.5mm thick and finished as per approved laminate shade. All material should be free from termite. Cost includes requried accessories like hinges and handles of approved size. Loft frame and unit installed to the masonry wall using proper concrete screws. |
| 16 | OPEN CABINET - in - ELEVATION (D) |
| 17 | Supply & Installation of Modular Kitchen Open cabinet made out of 16mm thick Boiling Water Resistant (BWR) plywood as a frame on all 4 sides and centre partition of thickness 50mm of make Century/Green /Archid brand cut to required size at factory and finished with 1mm thick laminate on the outside area and 0.8mm thick laminate on the inside and less visible areas, the shelves to be done with 16mm BWR ply and the back side of the wall unit to be finished with 8mm thick plywood. All laminates are factory pressed and the edge banding to be of thickness 1mm to 1.5mm thick and finished as per approved laminate shade. All material should be free from termite. Cost includes requried accessories like hinges and handles of approved size. Loft frame and unit installed to the masonry wall using proper concrete screws. |
| 18 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 225 mm |
| 19 | Supply & installation of Anlge valve , bottle trap, floor mounted Bridge mixer tap, connection hose, sink drain pipe and required small accessories |
| 20 | ACCESSORIES required for modular kitchen |
| 21 | TANDOM INOTECH DRAWER (hetitch) brand with galary - 70mm |
| 22 | PVC cutlery tray |
| 23 | TANDOM INOTECH DRAWER (hetitch) brand with galary - 150mm |
| 24 | Supply & installation of faber / equivalent brand chimney |
| 25 | Debris Clearance in truck loads - out of the site Sub Total 0.0 GST 18% 0.0 Grand Total 0.0 Total Amount in words : Note: The Bidder, at the Bidder’s own responsibility and risk, is encouraged to visit the Site of Works and obtain all information necessary for preparing the Bid. The Bidder shall quote his price which should include GST. In case of discrepancy in the rates quoted in words and figures, the rates in words will be considered for evaluation. Digital Signature of Bidder |
