|
| 1 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/ above ground level) including floor finishes complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Dismatling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed. |
| 3 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc. laid and bedded in any mortor complete all as specified and as directed. |
| 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 5 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 6 | Dismantling of old unserviceable, rusted, broken (corrugated/ semi corrugated, etc.) CGI/ AC/ Fibre glass sheets in ridge and roof coverings complete all as specified and as directed. |
| 7 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 9 | M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in levelling course, finished even and fair for laying floor finishes etc. complete all as specified and directed by the Engineer-in-Charge. |
| 10 | M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base floor/ floors and paving etc. complete all as specified and as directed. |
| 13 | S&F rubber moulded, machine pressed PCC interlocking paver block confirming to IS 15658-2006 of thickness 80mm, M-40 Grade with grey cement and pigment laid dry, over and including 25mm thick screed river washed sand cushion as in floor, shape and colour as directed by Engr-in-Charge. |
| 14 | M&L for 10mm to 12mm thick vitrified, unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mm x 300mm as in parking/ hardstanding etc. laid over and including 15mm thick screed bed in CM (1:4), set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles complete all as specified and as directed. |
| 15 | M&L for pre-cast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) kerb solid blocks, exc. 10cm in width and setting in cement mortar (1:4) complete all as specified and as directed. |
| 16 | S&F anodised aluminium snap grid frame work (600mm x 600 mm) for false ceiling complete all as specified and as directed. |
| 17 | S&F 8.0mm thick calcium silicate board if siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid for exposed metal frame ceiling (frame work for ceiling shall be measured and paid separately) complete all as specified and as directed. |
| 18 | M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coats of oil bound distemper white or tinted over a coat of white putty in patches as required complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 20 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 21 | M&L for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble, laid over and including 20mm screed bed in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Rounding/ chamfering to edge of stone slab like granite, marble, kota stone etc. to required shape and design including grinding and polishing to obtain required finish complete all as specified and as directed. |
| 23 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde-E-250) Quality-B complete all as specified and as directed. |
| 24 | S&F pre-painted galvalume GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 26 | M&L for walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed. |
| 27 | M&L for stone jalli of 35-40mm thick in any size and in side shape with asthetic view complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for sand stone pillars with asthetic view in two sides as approved by Engineer-in-Charge to fix stone jalli of 35-40mm thick, size not less than 0.10m x 0.10m x 0.90m, including chamfers weatherings, throating etc. complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L for stone slab 25mm to 30mm thick dressed true and square, in one length not less than 60cm and n. exc. 120 cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edged rounded or chamfered as directed, set, jointed and pointed in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 30 | M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar (1:4), surface finished fair and even complete all specified and as directed. |
| 31 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats exterior weather proof water base emulsion paint, over a coat of chalk whiting complete all specified and as directed. Please Enable Macros to View BoQ information |
