|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 2 | Group A |
| 3 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 4 | Group A |
| 5 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 6 | 20 mm |
| 7 | 25 mm |
| 8 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 9 | 32 mm |
| 10 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 11 | 2 X 1.5 sq mm + 1 X 1.5 sq mm earth wire |
| 12 | 2 X 4 sq mm + 1 X 4 sq mm earth wire |
| 13 | 2 X 6 sq mm + 1 X 6 sq mm earth wire |
| 14 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 16 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 17 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 18 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 19 | 5/6 amps switch |
| 20 | 3 pin 5/6 amp socket outlet |
| 21 | 15/16 amp switch |
| 22 | 6 pin 15/16 amp socket outlet |
| 23 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. |
| 24 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required |
| 25 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 26 | Supply of the following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 27 | 6 way , Double door |
| 28 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, C series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole |
| 29 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.A) 63 amps |
| 30 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 31 | 125 Amp, 36KA, FPMCCB |
| 32 | 250 Amp, 36KA, FPMCCB |
| 33 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (prefreably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq mm FRLS?HFFR PVC insulated copper conductor single core cable and earthing etc. as reqd. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 34 | Supplying, Installation, testing and commissioning of Fresh Air fan of 250mm sweep complete with louvers & blades in plastic body with self-opening louvers in the existing opening including making the hole to suit the size of the above fan, making good the damaged, connections, earthing etc., as required. |
| 35 | Supplying, installation, testing and commissioning of heavy-duty exhaust fan of 300 mm sweep, 900 RPM confirming to IS 2312/67 complete with louvers and frames in the existing opening including making the hole to suit the size of the above fan, making good the damage, connections, earthing etc, as required. |
| 36 | ED Batten light (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) |
| 37 | 18-22 Watt |
| 38 | Supplying and fixing of 10-12watt LED Bulkhead fitting, pressure die-casting aluminium housing having colour rendering (CRI) of ≥85, THD<20% and co-related colour temperature (CCT) of (5700/6500K) having system efficiency not less than 110 lumen per watt complete. etc. i/c making connections, testing, commissioning etc. as required. The manufacturer should provide LM-79 & LM-80 reports along with guarantee of 5 year. as required. |
| 39 | Supplying and fixing of existing damaged fitting into 10 to 12 watt 600 mm long high efficiency efficacy more than 120 LED linear batten Luminaries having pressure die-casting aluminium housing and polycarbonate diffuser within built APFC driver having efficiency of driver 85% power factor > 0.90, THD <20% with minimum 2.5 KV surge protection, LED life with not less than 50000 burning hours etc. suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency 110 luman per watt. and colour temperature of 6500 K, CRI >85 including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of two nos. fastener Hook, etc. The manufacturer should provide LM-79 & LM-80 reports along with guarantee of 5 year. as required. |
| 40 | Supplying, installation, testing and commissioning of fancy PVC Round Batten Brass bulb Holder for Wall including connection etc. as required. |
| 41 | Supply and fixing 3 mm. thick phenolic, Size: 8x4 Feet laminated Hylum sheet cover on existing M.S. Box with brass screw i/c cutting the sheet for existing switch, socket etc. as required. |
| 42 | Supplying, Installation, Testing and Commissioning of Vertical Submersible water proof pump set, three phase 415 volts, motor having IP 68 protection, rating 7.5 HP 5.5 KW, built in thermal over load protection alongwith float switch to stop the pump as minimum water level is reached pump having bidirectional mechanical seal, capacity to deliver 180-1560 LPM water at the heat of 6-24 meter i/c electrical connections complete testing etc. as required. |
| 43 | Supplying & Replacement of fully automatic control panel suitable for 10 HP sewage submersible Pump set having suitable contactors for direct-on-line starter, ammeter, voltmeter, overload relay, dry run protection, thermal protection, moisture protection, indicating lamps, ON/OFF Push button, SPP, all duly wired in MS Fabricated Indoor type box complete etc. as required. |
| 44 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE Copper conductor power cable of 1.1 kV grade of following size in the existing as required. |
| 45 | 4 x 16 Sq.mm Please Enable Macros to View BoQ information |
