|
| 1 | Dismantling of flexible pavernents and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. (Item No. 3.10) |
| 2 | Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. Upto 900mm dia and above. etc complete. (Item No. 46.31) |
| 3 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (Item No. 46.13) |
| 4 | Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (Item No. 46.12) |
| 5 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) (Item No. 12.22) |
| 6 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuf as directed etc. complete. (By/manaual Means) a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add Add 20% 20% d) d) 4.50m 4.50m to to 6.0m 6.0m lift, lift. Add 30% (Item No. 12.02 |
| 7 | Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting. erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. (Item No. 23.03) |
| 8 | Providing rubble filling filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete. (Item No. 11.01 |
| 9 | Providing and laying in situ/ ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss met guartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications(Natural sand/ VSI sand finely washed etc) (Item No. 11.02 |
| 10 | Providing and laying cement co cement concrete pipe of IS 458:2003 NP-4 class of 1200mm diameter in proper line, level and slope etc. complete. (Item No. 11.21) |
| 11 | Providing cast in situ/ready mix M20 grade cement concrete for head walls of CD work/retaining retaining walls etc. including necessary form work, compaction, fin action, finishing and curing etc. complete. (with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA (Item No. 11.29) |
| 12 | Providing cast in situ/ready mix M10 grade cement concrete for head walls of CD work/ of CD work/retaining walls etc.including necessary formwork,compaction, finishing and curing etc. complete. (with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications (Natural sand/ VSI sand finely washed etc), cement 4.05 bags/cumt) (Item No. 11.28) |
| 13 | Providing selected hard murum filling including laving in lavers of 15 to 20cmwith watering and compacting etc. complete. (Item No. 11.24) |
| 14 | Construction of granular sub-base by providing close graded Material mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading-I Material (Item No. 3.01) |
| 15 | Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. (Item No. 3.23) |
| 16 | Prime coat-Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, , primer primer at at the rate of 0.60kg/ sqm using mechanical means. (Item No. 3.29) |
| 17 | Providing and applying tack coat on the prepared surface heating by and applying co fames in Boiler and spraying bitumen with sprayer on Dry/Hungry B.T. surface 3kg/10sqm. (VG-30 bulk bitumen rates are considered to arrive rates) (Item No. 3.31) |
| 18 | DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregatès of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with 'VTS , transported to site with VS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100mm compacted thickness. USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. thickness USING Batch hot mix plant (VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.44) |
| 19 | BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous 1, with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime/tack coat. For Bitumen of specified grade USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.48) |
| 20 | Providing cast in situ/ready mix block of M10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etc. complete. (with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specificalions (Natural sand/ VSI sand finely washed etc), cement 4.05 bags/cumt) (Item No. 11.22) |
| 21 | Providing and laying pitching on slopes laid over prepared filter media including boulder apron apron laid laid dry in front of toe of embankment complete as per drawing and technical specifications etc. complete. (by stone/boulder) (Item No. 14.72) |
| 22 | Providing and applying epoxy paint primer with middle coat and top coat to superstructure including scaffolding etc complete. (Item No.19.04) |
| 23 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600mm made out of 3mm 3mm aluminum composite material sheet bonded with white retro reflective sheeting of Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/ heat activated adhesive retoreflective specified back ground, border and back side retorefictive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65mm X 65mm X 6mm, 3.45m long, duly painted with with flat oil paint having alternate black and white bands of 25cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B(Type IV High intensity micro-prismatic grade sheeting- HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and cut- out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. (Item No. 6.29b) |
| 24 | Providing and fixing Road junction/ Inforrnation sign board of size 0.90m x 0.60m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border/ letters/ numeral/ arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5mm of 3.65m. long inflated at bottom drilled on top and painted in white and black bands of 30cm. with 4 Nos, high strength G.I. bolts and nuts of size 10mm dia. and 20mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60cm x 60cm x 75cm size as directed by Engineer- in- charge etc. complete. Mild Steel Board with Engineering Grade. (Item No. 6.47) |
| 25 | Supply of Rubble, Murum, Soil, 60mm./40mm. metal(Hand broken), royalty charges are not included in the rates. Any revision in Royalty charges and surcharge shall be included in the rate analysis of the respective item. If there is variation in these rates the difference shall be paid extra over the items to the contractor and shall be recovered if these rates are reduced by Govt. i.e. Revenue department. The Government of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt. 04 June 2021 States that the Royalty charges of Rs. 216.18/ cum. are to be considered. The surcharge levied on Royalty shall also be payable to the contractor. (Item No. 47.01 Please Enable Macros to View BoQ information |
