Tender For Development Of Pradhanpat Integrated Eco-Tourism Circuit, Deogarh., Deogarh-Odisha

TDR : 55504578

Tender Notice
BOQ

13 Days Left

Deogarh , Odisha

Tender Brief : Tender For Development Of Pradhanpat Integrated Eco-Tourism Circuit, Deogarh.

Document Fees
₹ 10000 /-

EMD
₹ 733800.0 /-

Tender Value
₹ 7.33 Crore /-

Submission Date
30-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation of founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification including cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
2	Upto 1.5mtr Depth
3	Beyond 1.5mtr to 3.00 mtr Depth
4	Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge.
5	Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
6	Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.( The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work.
7	Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
8	Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. (a)Upto 1.5mtr Depth
9	(b)From 1.5mtr to 4.5Mtr Depth
10	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
11	R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
12	R.C.C. Plinth Beam
13	R.C.C. Beams, columns, grider and bressmer etc.
14	R.C.C. Floor and Roof slab 4.3Mtr. Height.
15	R.C.C. Lintel
16	Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
17	(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
18	(B)R.C.C. Plinth Beam
19	(C)R.C.C. Beams, columns, grider and bressmer etc.
20	Drain Bed
21	Drain Wall
22	Drain Slab
23	Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approved drawing and technical specification and as per clause-1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer-in-Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)
24	Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
25	Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. ( Excluding Cost Of Steel Reinforcement )
26	Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
27	Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge
28	Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
29	Providing and applying 12 mm thick cement plaster in cement mortar (1:6) on the surface of brick masonry walls (external even surfaces), including racking out joints, scraping and cleaning the surface, and finishing smooth using wooden floats to proper plumb and level. The work also includes making grooves, beads, and drip courses to provide the required ornamental finish as per drawings. The rate includes the cost of all materials, labour, conveyance, loading and unloading, taxes and royalties, scaffolding, watering and curing, sundries, tools & plants (T&P), and all other incidental charges, complete as per the directions of the Engineer-in-Charge.
30	Providing and applying 16 mm thick cement plaster in cement mortar (1:6) on the surfaces of brick masonry walls (internal uneven surfaces), including racking out joints, scraping and cleaning the surface, and finishing smooth using wooden floats, bars, etc., to proper plumb and level. The work also includes making grooves, beads, and drip courses to give the required ornamental finish as per drawings. The rate includes the cost of all materials, labour, conveyance, loading and unloading, royalties, scaffolding, staging, watering before plastering, curing, sundries, tools & plants (T&P), and all other incidental charges, complete as per the directions of the Engineer-in-Charge.
31	Providing and applying water proofing treatment to roof including treatment of construction joints and cracks by pressure grouting bore packing, formation of covering (50X50MM) through surface preparation, and application of single component PU based liquid waterproofing membrane (Nitroproof 600pf or equivalnet) in two coats to achieve minimum 1.5mm dry film thickness, including 300 GSM Geotextile separation layer and protective screed where specified complete with all material, Labour, Tools, Curing and finishing as per specification and direction of Engineer in Charge.
32	Providing and applying waterproofing treatment to toilet areas including treatment of construction joints and cracks bore packing, formation of covering (50x50mm) surface poreparation and application of polymer modified cementatious waterproofing coating (Brushboard Ultraflex or Equivalent) in Two coates with fiber mesh/tape reinforcement at joints, achieveing required thickness and perforamance including protective screed/plater where specified complete with all material labour tools ccuring and finishing as per specified and direction of Engineer in Charge.
33	Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.(Make: Birla White/J K Wall Putty)
34	Providing and applying two coats of Plastic Emulsion Paint of approved make and shade over one coat of approved wall primer on internal plastered surfaces, including surface preparation, materials, labour, scaffolding, T&P, and all incidental works, complete as per the direction of the Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint)
35	Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer make an even finished surface over a coat of water bound cement primer in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint)
36	Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use). (Make:Dulux/ Nerolac/ Berger/ Asian Paint)
37	Providing & laying granite stone flooring in Floors and landing using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including machine polishing to edge moulding to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
38	Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size upto 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including machine polishing to edge moulding to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
39	Providing and laying 600 mm × 600 mm vitrified tile flooring conforming to IS: 15622, of approved make, quality, shade and colour, laid over 20 mm thick cement mortar bed (1:4) (1 cement : 4 coarse sand), including cutting tiles to required size, laying in proper line, level and plumb, and filling joints with white cement slurry mixed with matching pigment, including cleaning the surface, complete with all materials, labour, tools & plants, loading, unloading, conveyance, royalties, watering and curing, etc., complete as directed by the Engineer-in-Charge.(Note: Sample of tiles shall be approved before procurement and use.)(Make: Johnson / Somany / Varmora)
40	Providing and laying vitrified tile dado/skirting conforming to IS: 15622, of approved make, quality, colour and size 600 mm × 600 mm, fixed up to the required height from floor level over an under layer of 12 mm thick cement mortar bed (1:3) (1 cement : 3 coarse sand), including cutting tiles to required size, laying in proper line and level, and filling joints with white cement slurry mixed with approved colouring pigment to match the shade and colour, including cleaning the surface, complete with the cost of all materials, labour, conveyance, royalties, loading, unloading, sundries, watering and curing, tools and plants (T&P), etc., complete as directed by the Engineer-in-Charge.(Note: Sample of tiles shall be approved before procurement and use.)Approved Makes: Somany / Johnson / Varmora.
41	Supplying, fitting & fixing of M.S. Grill made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
42	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) soliddoor/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.Shold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 65 x 125 mm
43	Providing and fixing ISI marked 32 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete (SOR-2022, Item-25.17.8)
44	Supplying and installing Aluminium System - Sliding windows made out of ALUPURE/Equivalent make frame dimension of 88mm x 40 & Sash dimension of 31mm x 61.5mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. or
45	Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
46	Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.
47	Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.
48	Providing & laying RP Mangalore roof tiles including ridge (as per approved pattern 20mm nominal thickness and of approved size) on roofs jointed with cement mortar I : 4 mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar I :4 and finished neat complete as per direction of Engineer-incharge
49	Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
50	Supplying, fitting & fixing of M.S Rolling shutter confirming to BIS specification as per approved design and drawing including cutting holes in brick/RCC surface and grouting the hold fasts/clamps properly in line and plumb with CC(1:2:4) using 12mm size black hard granite chips and making good to the damages including cost of all materials ,transportation, all labour, sundries, T&P and priming one coat with approved quality metal primer etc. complete as per direction of Engineer in charge.80 x 1.25mm MS lath with 1.25mm thick top cover
51	Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
52	Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
53	Construction of embankment with approved materials obtained from borrow pits with all leads transportation to required slope & compacting by mechanical means spreading, grading to required slope & compacting to meet requirement as per approved drawing and technical specifications complete in all respect as per Section 900 and clause 305 of MoRT&H Specification for Road & Bridge works (latest revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
54	Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
55	Construction of granular sub-base by providing Grading VI close graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
56	Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
57	Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.
58	Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.
59	Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.
60	Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge
61	Providing and lying Plain Cement Concrete of proportion (1:4:8) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
62	Supplying fitting and fixing angle iron truss / rafter / purlin made out of M.S. angle iron section Structural steel work of Rectangular hollow Section 100x50 of 4mm thick includinghoisting, fixing in position Welded in roof frame including drilling holes and supplying nuts and bolts with cement concrete (1:2:4) on walls using 12mm to 20mm size black hard crusher broken granite chips (20mm size not exceeding 25%) including watering, curing, cost, conveyance royalties and taxes of all materials complete in all respect. (Payment will be made on the weight of angle iron only and the weight of nuts and bolts will not be taken into consideration).
63	Providing and fixing of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
64	Providing & fixing 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/ c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction,
65	including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting .
66	Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
67	Providing and fixing 23 mm thick wall paneling with 19mm thick plywood and 4mm thick veneer & wooden beet with PU polish, ply approved make fixed on both side of ply /Gl framework of section 19mm x 50mm or as required @ 600mm c/c both ways including all hardwares, cost of material, putty, paint, brushes, all labor, taxes,loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurement & use).
68	Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete.
69	Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
70	Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre all labor, taxes,loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge.
71	Dismantling of Granular courses of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately all labor, taxes,loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge.
72	Steel Way Board SS Retro Board as Per Design of size 3.00meter x1.5 meter Retro Board Made of 3mm Thick Substrate of ACP Will Be Covered with High Intensity Prismatic Retro Refleve Sheeting with all numerals and pictorials as per approval Colour and design. The ACP will be mounted on a back support fame of ss 20mm x 20mm square pipe which will be properly welded to 32 NB Round ss Pipe with 80 NB post with Tope covering welding, Drilling Rivets nuts & bolts Bottom Lugs with necessary clamps complete Etc. As per Direction of Engineer-In-Charge.
73	Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.
74	Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
75	Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
76	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) .
77	Screened through sieve of I.S. designation 20 mm
78	Screened through sieve of I.S. designation 16 mm
79	Screened through sieve of I.S. designation 4.75 mm
80	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
81	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
82	Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
83	Providing and stacking of Kigelia pinnata of height 150-165 cm. in poly bag of size 25 cm as per direction of the officer-in-charge.
84	Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in poly bag of size 25 cm as per direction of the officer-in-charge.
85	Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
86	Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge.
87	Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pot of size 20 cm as per direction of the officer-in-charge.
88	Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
89	Providing and stacking of Murraya exotica of height 45-60 cm. in poly bag of size 15 cm as per direction of the officer-in-charge.
90	Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-incharge.
91	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts(cost of manure, sludge or extra good earth if needed to be paid for separately) :
92	Holes 1.2m dia and 1.2m deep
93	Holes 90 cm dia, and 90 cm deep
94	ELECTRICAL WORKInternal Electrical Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- POLYCAB/HAVELLS/KEI/GLOSTER with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
95	Group-A: L.P= F.P= C.B.P=
96	Group-B: L.P= F.P= C.B.P=
97	Group-C: L.P= F.P= C.B.P=
98	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)
99	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
100	Supplying,fixing of 6A Plug on the separate board with complete fitting (anti bactorial & flame retradant type) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
101	1 nos 6 Amp 3-pin socket with 6 Amp switch.
102	2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
103	Supplying & fixing of 16A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
104	Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-chargeMake-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
105	Supplying and installation of 25A AC starter Modular type or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of suitable range range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)
106	Recessed wiring to submain in FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.
107	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
108	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
109	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
110	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
111	FIXTURES
112	Supplying of Energy efficient surface /recess mounted square /round shape 12 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 12 watt and lumen output of 1200 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge.(Make: Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
113	Supplying and fixing of Energy efficient surface /recess mounted round shape 6 W LED luminaire of dimension of consists of white powder coated , die-cast Aluminium housing with high quality opal diffuser for glare-free uniform lighting distribution and lumen output of 660 lumens, CRI not less than 80,CCT of 6500 K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , The fixture design should be with flicker free operations ripple <5%, L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge.(Make: Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
114	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
115	Supply, Installation, Testing, Commissioning of focus cob led 12w with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the joband all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge.(Make: Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years .
116	SITC of Led Bulkhead 10w with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the joband all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge (Make: Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years .
117	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator)
118	1200 mm sweep
119	Supplying of WALL BRACKET FAN including wiring the down rod, earthing etc as required (Make :Bajaj/Usha/ Crompton/ Orient/ Havells).
120	Supplying of Exhaust fan / fresh air fan with louvre (Make -) as required.
121	200 mm sweep fibre body fresh air fan
122	Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.
123	Supply, Installation, Testing, Commissioning of highwall Inverter comptabilie split units (minimum 5 star) of following capacities including proper mounting arrangements and accessories, copper refregirant piping,pvc drain piping,power cable,control cable, initial charge of refrigerant, safety limit thermostat, etc complete including 5 KVA voltage stabilizers. ( Make -Hitachi/Daikin/Bluestar )
124	1.5 TR capacity.
125	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 /ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
126	6Way(6+18) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 with ,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
127	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator)
128	Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required .
129	Supplying and fixing 63Amps 4P 415 volts MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.Warranty on MCB is 1 year
130	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 240 volts, MCB . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.The MCB should be Replacement Warranty will be 1 year.
131	Supplying and fixing 25 Amps rating, RCCB 30mA DP poles. Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year.
132	32 Amps DP, 30 MA RCBO
133	Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
134	20 mm
135	LAN & TELEPHONE
136	SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit,Commscope.
137	SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit
138	SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax, Legrand, Panduit,Commscope.
139	SITC of Cat6 UTP 24 AWG 1m Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit,Commscope.
140	Supply Laying of 2 pair 0.5 cupper cable. Make : Finolex/ Polycab/ Kei.
141	Supply of 20 pair 0.5mm PIJF armode cable. Make : Finolex / Polycab / Kei
142	Supply and installation of Type 1 IP Phone 2 VoIP account, 120 x40 DOT matrix screen with bcaklight , Full HD duplex speaker phone, IPV6, Gigabit Etherent , PoEcomplete as required. Make: Grandstream, NEC, Mitel
143	SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand
144	Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000)/NDA/STQC compliant. Make-Honeywell series 50/Pelco/Axis/Bosch
145	Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR motorized Lens Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, Fixed Lens 2.8mm, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, Dual channel Audio, Alarm: 1In/ 1out, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000)/NDA/STQC compliant. Make-Honeywell(Series 50)/ Pelco/ Axis/Bosch
146	SITC of 16 Channel Network Video Recorder (NVR) havingdisplay split :- Main screen: 1/4/8/9/16, 2nd screen:1/4/8/9/16Make-Honeywell series 50/Pelco/Axis/Bosch
147	SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit,Commscope.
148	SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol, Cisco, HP
149	Supply, Installation,Testing & Commisioning of Surveliance 10 TB HDDMake:- WD/Segate/Toshiba
150	SITC of 43\\" 4K UHD(3840 X 2160) resolution Android LED display built in 2.4 GHz WiFi, 1.1 GHz built in Quad core processor, 2 GB DDR3 RAM, 8 GB memory, built in double core Mali 600 MHz GPU, with HDR 10, Dolby Audio, built in WiFi & Cromecast, HDMZI CEC, HDMIARC, built in Bluetooth 4.0. 20 W -Front facing speakers. 3 x HDMI 2.0, 1 x AV, 2 x USB 2.0 Type A, 1 x Headphone out, 1 x SPDIF out. Make: Panasonic/ Samsung/ Sony
151	SITC of Cat6 UTP 24 AWG 2m Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit,Commscope.
152	SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand
153	LIGHTNING PROTECTION SYSTEM
154	Air Terminal
155	Supply of 8 mm Aluminum Round Conductor. Tested as per IEC 62561. (Make:OBO/ABB/DHEN)
156	Supply of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. (Make:OBO/ABB/DHEN)
157	Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. (Make:OBO/ABB/DHEN)
158	Supply nof cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .Tested as per IEC 62561. (Make:OBO/ABB/DHEN)
159	Supply of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current.(Make:OBO/ABB/DHEN)
160	Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ). (Make:OBO/ABB/DHEN)
161	Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. (Make:OBO/ABB/DHEN)
162	Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.Tested as per IEC 62561. (Make:OBO/ABB/DHEN)
163	Supply of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current .(Make:OBO/ABB/DHEN)
164	Supply of Stand for Fang Fix system 16 kg made up of frost resistant concrete.(Make:OBO/ABB/DHEN)
165	Ring & vertical earthing system
166	Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561.(Make:OBO/ABB/DHEN)
167	Supply of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. (Make:OBO/ABB/DHEN)
168	Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561.(Make:OBO/ABB/DHEN)
169	Supply of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. (Make:OBO/ABB/DHEN)
170	Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 14.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 (Make:OBO/ABB/DHEN)
171	Supply of universal clamp made of SS to connect rod with flat conductor (Make:OBO/ABB/DHEN)
172	Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested (Make:OBO/ABB/DHEN)
173	Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system (Make:OBO/ABB/DHEN).
174	SITC of The above arrangements including all accessories as per Direction of Engg. In charge.
175	Supply, Installation, Testing & Comissioning of 6 KVA Online UPS IGBT based True Online Smart gxtmt+ Double conversion efficiency UPS and True Online Double Conversion with DSP Control Technology for High Performance with Single phase I/P & Single Phase O/P with 30 Min Back Up on 90 % Running load along MS Battery KBS Rack & Battery inter connection link of accessories for installation.with Suitable Battery Bank for 30 min back up with Sealed Maintenance Free Battery. Make: Amararaja/ Exide/ Kalorie,open type powder coated racks for Battery as per the specification complete as per direction of Engineer in charge(Make: NUMERIC / EMERSON /APC ).
176	FIRE EXTINGUISHER
177	SITC of CO2 type Fire Extinguisher 4.5 kg capacity with Brass forged Screw down wheel type valve, Aluminium Syphone initial gas charged as per IS 15222, bend pipe & Horn & complete with accessory mfd to IS:15683 with BIS mark , MTC & PESO certificate WILL BE PROVIDED WITH SUPPLY .Wall mounting bracket with screw,Fire Rating: 55B Cylinder will be Helium Leak Tested to 10-7 mbar I/S for leakage proof (Make: Supremex/Ceasefire/Minimax/Fireshield)
178	SITC of ABC Dry Powder Fire Extinguisher 4 Kg capacity mfd to IS: 15683 with BIS mark, Brass forged squeeze lever discharge valve, fitted with pressure indicating guage with direct nozzle, duly charged with BIS Marked 90 % MONO AMMONIUM PHOSPHATE (MAP) SILICONISED powder as per IS: 4308 with BIS mark and pressurized with Nitrogen Gas. Wall mounting bracket with screw, Fire Rating: 3A,55B Cylinder will be Helium Leak Tested to 10-7 mbar I/S for leakage proof (Make: Supremex/Ceasefire/Minimax/Fireshield)
179	Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter \\"FIRE\\" in black out side and handle with mounting bracket.
180	Subhead- I (Internal Electrification)Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- POLYCAB/HAVELLS/KEI/GLOSTER with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
181	Group-A: L.P= F.P= C.B.P=
182	Group-B: L.P= F.P= C.B.P=
183	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
184	Supplying,fixing of 6A Plug on the separate board with complete fitting (anti bactorial & flame retradant type) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
185	1 nos 6 Amp 3-pin socket with 6 Amp switch.
186	2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
187	Supplying,fixing of 1x6A+1X16A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-chargeMake-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
188	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)
189	S/F of Bakelite angle holder/batten holder Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
190	Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.
191	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
192	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
193	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
194	Light Fittings:-
195	SITC of Sleek LED 9 watt LED Lamp complete with all accessories etc. directly on angle holder as required.The luminaire should be Replacement Warranty will be 2 years(Make: Philips/Wipro /Crompton/Bajaj)
196	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
197	SITC of Led Bulkhead 10w with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the joband all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge (Make: Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years .
198	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator)
199	1200 mm sweep
200	BDBS,DB,AC DB,FLOOR PANELS,MCBS
201	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 /ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
202	Supply and fixing of 6 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator)
203	Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/LK
204	Supplying and fixing 25 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, MCB . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/LK in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 1 years.
205	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 240 volts, MCB . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/LK SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.The MCB should be Replacement Warranty will be 1 year.
206	Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make-AKG/BEC/Precision/Anchor
207	20 mm
208	32 mm
209	FIRE EXTINGUISHER
210	SITC of CO2 type Fire Extinguisher 4.5 kg capacity with Brass forged Screw down wheel type valve, Aluminium Syphone initial gas charged as per IS 15222, bend pipe & Horn & complete with accessory mfd to IS:15683 with BIS mark , MTC & PESO certificate WILL BE PROVIDED WITH SUPPLY .Wall mounting bracket with screw,Fire Rating: 55B Cylinder will be Helium Leak Tested to 10-7 mbar I/S for leakage proof (Make: Supremex/Ceasefire/Minimax/Fireshield)
211	SITC of ABC Dry Powder Fire Extinguisher 4 Kg capacity mfd to IS: 15683 with BIS mark, Brass forged squeeze lever discharge valve, fitted with pressure indicating guage with direct nozzle, duly charged with BIS Marked 90 % MONO AMMONIUM PHOSPHATE (MAP) SILICONISED powder as per IS: 4308 with BIS mark and pressurized with Nitrogen Gas. Wall mounting bracket with screw, Fire Rating: 3A,55B Cylinder will be Helium Leak Tested to 10-7 mbar I/S for leakage proof (Make: Supremex/Ceasefire/Minimax/Fireshield)
212	Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter \\"FIRE\\" in black out side and handle with mounting bracket.
213	Internal ElectricalRecessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- POLYCAB/HAVELLS/KEI/GLOSTER with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
214	Group-A: L.P= F.P= C.B.P=
215	Group-B: L.P= F.P= C.B.P=
216	Group-C: L.P= F.P= C.B.P=
217	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
218	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
219	S/F of Bakelite angle holder/batten holder Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
220	Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.
221	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
222	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Polycab/HAVELLS/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
223	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- POLYCAB/HAVELLS/KEI/GLOSTER in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
224	FIXTURES
225	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
226	SITC of Sleek LED 9 watt LED Lamp complete with all accessories etc. directly on angle holder as required.The luminaire should be Replacement Warranty will be 2 years (Make: Philips/Wipro /Crompton/Bajaj)
227	SITC of Led Bulkhead 10w with non integral / integral driver, 6500K color temp having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 120 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the joband all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years .
228	SITC of Exhaust fan / fresh air fan with louvre (Make -Bajaj/Usha/ Crompton/ Orient/ Havells) as required.
229	200 mm sweep fibre body fresh air fan
230	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 /LK -Exora-N as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
231	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator)
232	Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/LK
233	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 240 volts, MCB . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/LK SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.The MCB should be Replacement Warranty will be 1 year.
234	Supplying and fixing 25 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, MCB . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/LK in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 1 years.
235	Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make-AKG/BEC/Precision/Anchor
236	20 mm
237	32 mm
238	16 Mtr Highmast lighting
239	Supply,installation,testing & commsioing of 16 MTRS HIGH MAST FABRICATED PART AS PER DIMENSION: TOP DIA. 150 mm, BOTTOM DIA 360 mm, SECTION 2 nos.(SECTION LENGTH 8250 mm.) THICKNESS 4, 3 mm. BASE PLATE Dia. 520 mm. X 25 mm., PCD 445 mm., with following items: High Mast sections with Base Plate, Lantern Carriage suitable to fix upto 08 nos. (250 W LED) luminaries symmetrically in 08 nos. welded arm, 2 suspension Head frame, L-Stopper (3 Nos.),Mounting Plates, Lightening Arrestor and Earthing Pipe (MS GI). Suitable for basic wind speed 50Mtrs/sec.Make -Bajaj /Valmont/Transrail/Utkrash
240	Supply,installation,testing & commsioing of raising lowering system comprisingDouble Drum Winch 350 Kg. (Gear Ratio 53:1), 1 HP Motor (3Ph, 230 V), Ø6 mm. SS Wire Rope (Grade-AISI 316 ), Manual Operating Handle, Trailing Cable (1 sets 5 core x 2.5 sq. mm. EPR PCP Round Copper), GI Junction Box. (Without Luminaries, AOL, Plug-Socket & Feeder Pillar-Control Switch)
241	Supply,installation,testing & commsioing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template with Bolt M30 x 850 (08 Nos.) with Template and Anchor Plate with M25 FOUNDATION
242	Supply,installation,testing & commsioing of LED floodlight type BJFL 250 W 8NOS LED Make-Wipro/Philips/Klite/Bajaj.
243	Supply,installation,testing & commsioing of LED type single dome aviation obstruction light.
244	Supply,installation,testing & commsioing ofoutdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.
245	As Above
246	12 Mtr Highmast lighting
247	Supply,installation,testing & commsioing of Design, manufacturing, supply, of Hot dip galvanised, polygonal raising lowering type 12M high masts (Top DIa: 100mm, Bottom DIa: 360mm, PCD: 445mm) with fixed head frame suitable for mounting 6 nos. of 200W LED flood light fixtures complete with all accessories as required including foundation bolt manufactured from special steel along with nuts, washers, anchor plate and common template. OEM should provide test report of sheet, wire rope, Zinc Test Report. (Make: Lysaght/Bajaj/Valmont)
248	Supply,installation,testing & commsioing of raising lowering system comprisingDouble Drum Winch 350 Kg. (Gear Ratio 53:1), 1 HP Motor (3Ph, 230 V), Ø6 mm. SS Wire Rope (Grade-AISI 316 ), Manual Operating Handle, Trailing Cable (1 sets 5 core x 2.5 sq. mm. EPR PCP Round Copper), GI Junction Box. (Without Luminaries, AOL, Plug-Socket & Feeder Pillar-Control Switch)
249	Supply,installation,testing & commsioing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template with Bolt M30 x 850 (08 Nos.) with Template and Anchor Plate with M25 FOUNDATION
250	Supply,installation,testing & commsioing of LED floodlight type BJFL 200 W 6NOS LED Make-Wipro/Philips/Klite/Bajaj.
251	Supply,installation,testing & commsioing of LED type single dome aviation obstruction light.
252	Supply,installation,testing & commsioing ofSupply of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.
253	As Above
254	STREET LIGHT
255	9 MTRS GI OCTAGONAL (BLACK) POLE FABRICATED PART AS PER DIMENSION : TOP DIA. - 70mm, BOTTOM DIA. - 155 mm, SECTION - 1 (SECTION LENGTH-9000 mm) THICKNESS -3 mm, BASE PLATE - 225 mm x 225 mm x 16 mm. (GI As per IS 2629) , PCD -225mm with M25 grade rcc foundation Make -Bajaj /Valmont/Transrail/Utkrash
256	SITC of PU PAINTED Decorative Single arm bracket 1500mm long.
257	Supply,installation,testing & commsioing of 100W SMD LED Streetlight fixture with System efficacy of 130 lm/W (9100 lumens). Luminaire shall be made up of pure polyster powder coated die cast Aluminium housing with high purity IP66 lens without any glass cover, of same make. The luminaire should have a dimension of 235mm x 160mm x 96mm ± 5mm appoximate weight of 1.3 Kg ± 0.25 Kg. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. All external hardware must be of SS304 grade. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. Luminaire shall be designed with street optic LENS for uniform light distribution. Maximum LENS dome top temperature shall be less than 95°C at 45°C ambient temperature. LM 80-08 compliant LEDs of EMC/ceramic package of wattage of 3W-5W from reputed makes such as Nichia/Cree/ Bridgelux/ Maxlux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 and IK10 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI of Minimum 70 and SDCM of < 5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-270V AC. Driver Efficiency > 85% & 5 KV internal surge protection with external surge protection of additional 10KV, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. LED Driver must have short circuit, open circuit, Auto cut-off protection for low and high input voltage. Driver must be of die cast / extruded Aluminium casing. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 3:2013; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Make-Wipro/Philips/Klite/Bajaj.
258	As Above
259	9 MTRS GI OCTAGONAL (BLACK) POLE FABRICATED PART AS PER DIMENSION : TOP DIA. - 70mm, BOTTOM DIA. - 155 mm, SECTION - 1 (SECTION LENGTH-9000 mm) THICKNESS -3 mm, BASE PLATE - 225 mm x 225 mm x 16 mm. (GI As per IS 2629) , PCD -225mm with M25 grade rcc foundation Make -Bajaj /Valmont/Transrail/Utkrash
260	SITC of PU PAINTED Decorative DOUBLE arm bracket 2500mm long.
261	Supply,installation,testing & commsioing of 100W SMD LED Streetlight fixture with System efficacy of 130 lm/W (9100 lumens). Luminaire shall be made up of pure polyster powder coated die cast Aluminium housing with high purity IP66 lens without any glass cover, of same make. The luminaire should have a dimension of 235mm x 160mm x 96mm ± 5mm appoximate weight of 1.3 Kg ± 0.25 Kg. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. All external hardware must be of SS304 grade. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. Luminaire shall be designed with street optic LENS for uniform light distribution. Maximum LENS dome top temperature shall be less than 95°C at 45°C ambient temperature. LM 80-08 compliant LEDs of EMC/ceramic package of wattage of 3W-5W from reputed makes such as Nichia/Cree/ Bridgelux/ Maxlux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 and IK10 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI of Minimum 70 and SDCM of < 5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-270V AC. Driver Efficiency > 85% & 5 KV internal surge protection with external surge protection of additional 10KV, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. LED Driver must have short circuit, open circuit, Auto cut-off protection for low and high input voltage. Driver must be of die cast / extruded Aluminium casing. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 3:2013; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Make-Wipro/Philips/Klite/Bajaj.
262	As Above
263	Post Top Lamp for service road Area
264	SITC of 45W Decorative post top Luminaires BIS approved for Urban lighting, Composed of an aluminum body sealed with a deep polycarbonate protector, , Fixture Dimension -height 620 mm +- 5% and width as 488X 488mm ,weight should not be less than 11.5 kg +- 5 % and 70(Typ), <= 5 SDCM Luminaire can be installed as a suspended luminaire . The luminaire is equipped with PMMA lenses with wide photometry for increased pole spacing. The luminaire is provided with internal surge protection of 4 KV .Fixture is having external surge protection of 10KV. Electronic driver is having power factor>0.90, THD <10 % and input voltage range from 110-277V AC at 50/60Hz. Minimum lumen 5000 lumens in CCT range of 3000/4000 as per ANSI,LED Make CREE/Osram/Samsung/APT with LM80 report to be submitted at the time of Supply , life of 50000 burning hours with 70% of initial lumens maintained. Ambient Operating Temperature is -40 Deg. to 50 Deg. Luminaire should Maintain Ingress Protection of IP65 for better weather proofing. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. with 4 M Die cast / decorative pole (MAKE: klite/Philips/Reytek/Wipro)
265	Supply and fixing of Architectural bollard LED 3000K 230-240Vac 50-60Hz CRI > 70 Input power: 8W,800lm, Height 800mm, IP rating IP65, impact resistance IK7. MATERIAL CHARACTERISTICS : Extruded aluminium bottom pipe Ø100 x H800mm with polycarbonate diffuser and integral base plate Ø180 with PG gland. Operating ambient temperature range is from -20°C to +40°C. Resistance to heat and fore for plasticpart should be 850 degree celcius. Housing Color Dark grey RAL 7043. CCE, CE and RoHS compliance. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted. (MAKE: klite/Philips/Reytek/Wipro)
266	SUB-DISTRIBUTION PANEL
267	Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.
268	Busbar -200AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
269	Incomer feeder consist of
270	One (1)-160 Amp Moulded Case Circuit Breaker, 4P, Breaking capacity – 25 KA with adjustable Micro Processer Based Release with Ics=100% Icu (LSI Protection) with 3 NosIndicating lamp for ON/OFF/Trip with control fuse/ MCB, 3 Nos 160/5 A 15VA Cl 1.0 CTs, 1No - Multifunction meter (V,A,KWHr, KW, P, F)( Make-LEGRAND DPX3/ Siemens 3VA/ Schneider CVS/LK D-Sine)
271	Outgoing
272	Five(5) - Outgoing Feeders:03 nos for External feeder Panel,01 nof for Admin Block & SPARE each comprising of
273	ONE(1) -01 Outgoing 63 Amp Moulded Case Circuit Breaker, 4P, Breaking capacity – 16 KA with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A , 15VA, Cl 1.0 CTs, Digital Voltmeter, Ammeter, Ventilation fanMake-LEGRAND DPX3/ Siemens 3VA/ Schneider CVS/LK D-Sine)
274	Three(3) - Outgoing Feeders:01 nos forUPS ,01 nos for Fire Pump & SPARE each comprising of
275	One (1)-40Ampoulded Case Circuit Breaker, 4P, Breaking capacity – 16 KA with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A , 15VA, Cl 1.0 CTs, Digital Voltmeter, Ammeter, Ventilation fanMake-LEGRAND DPX3/ Siemens 3VA/ Schneider CVS/LK D-Sine)
276	PANEL AS ABOVE
277	SHOP METER PANEL
278	Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 63 Amp CU busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
279	Busbar -100A,AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
280	Incomer
281	One (1)- 40 Amp,10kA, 4P MCB
282	FIVE(5) - Outgoing Feeders for-02 nos
283	1 Nos - 25 Amp,10kA, DP MCB
284	04 Nos-Single phase energy meter
285	PANEL AS ABOVE
286	External Feeder Pillar 1
287	Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 100 Amp CU busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
288	Outgoing:
289	1 No - 63 Amp 4P MCB Incomer with 72 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required
290	3 Nos - 16 Amp DP MCB Incoming for Toilet Area
291	Busbar -100A,AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
292	3 Nos - 40 Amp 4P MCB Outgoing
293	2 Nos - 16 Amp DP MCB Outgoing
294	3 Nos - 10 Amp SP MCB Outgoing
295	1 No - 16 Amp DP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
296	PANEL AS ABOVE
297	External Feeder Pillar f2
298	Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 100 Amp CU busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
299	Outgoing:
300	1 No - 63 Amp 4P MCB Incomer with 72 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required
301	1 Nos - 40 Amp 4P MCB Incoming for Shop metering Panel
302	Busbar -100A,AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
303	2 Nos - 40 Amp 4P MCB Outgoing
304	3 Nos - 16 Amp DP MCB Outgoing
305	3 Nos - 10 Amp SP MCB Outgoing
306	1 No - 16 Amp DP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
307	PANEL AS ABOVE
308	(Cable, Cable Tray,End Termination & Cable Jointing)
309	Supplying & Testing of 1.1 KV grade Aluminium XLPE Armourd power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (KEI/POLYCAB/GLOSTER)
310	3.5core X 50 sqmm
311	3.5core x 35 sq mm for sub panel to 03 Nos External Feeder
312	3.5core x 16 sq mm for External lighting
313	Supplying & Testing of 1.1 KV grade Cupper Armoured cable. (KEI/POLYCAB/GLOSTER)
314	4C X 10 sqmm
315	3CX 1.5 sqmm for street light wiring including termination
316	4CX 6 sqmm including termination
317	Cable laying
318	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size in the existing RCC/HUME/STONEWARE/METAL pipe as required.
319	upto 25 Sqmm
320	Above 25 sqmm & upto 120 Sqmm
321	Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required.
322	110 mm dia
323	TERMINATION OF CABLES :-
324	Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
325	3.5C X 50 sqmm
326	3.5C X 35 sqmm
327	4CX 16 sqmm
328	3CX 10 sqmm
329	Cable tray
330	Supplying instalaltion hot dip galvanized perforated type cable tray with perforation not more than 17.5% of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as requiredMake-BEC/MEM/AKG.
331	150 mm (W) X 50 mm (H) with 1.6 mm thick sheet
332	Supply, Exivation&Refilling of HDPE Pipe, 60MM Dia
333	Earthing
334	Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
335	Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required
336	Providing and fixing 25mm X 5 mm copper strip at 0.50 meter below ground/suraface including connection/termination with brass nut, bolt, spring, washer excavation and refilling(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required.
337	Providing and fixing 50mm X 6 mm GI strip at 0.50 meter below ground/suraface including connection/termination with nut, bolt, spring, washer excavation and refilling(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required.
338	Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
339	INTERNAL (P.H)Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD
340	32mm dia
341	25mm dia
342	20mm dia
343	Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD
344	32mm dia in ground floor
345	Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC. in ground floor
346	Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.
347	For 250mm thick wall in ground floor
348	Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge. In ground floor
349	Providing all materials, labour, T&P for fitting & fixing of following Brass Ball Valves with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO/LEADER
350	32mm dia ball valve
351	25mm dia ball valve
352	Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china floor mounted one piece water closet (European pattern) of size with P Trap with seat cover (solid) of approved make in all floor Flush tank with frame, flush plate including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA. Rate as per CERA S1013221 or equivalent
353	Supply all materials and labour for fitting and fixing of following size white glazed vitreous china Half Padestal wash hand basin of size 630 x 470 x 205 mm of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. including all duties, transportation etc. all complete as per direction of EIC. Make : JAQUAR/HINDWARE/CERA. Rate as per CERA S2040112 & S2090120 with Fixing Accessories
354	Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china top inlet urinal of confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA .Rate as per CERA S4020104 or equivalent
355	Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. Make : JAQUAR/HINDWARE/CERA
356	Hand Shower (Health Faucet) Health Faucet ABS bodywith 1 meter SS braided connection pipe & Wall Hook (As per Cat. No F8030109AB of CERA)
357	15mm dia Angular Stop Cock with wall flange (As per CERA F1015201)
358	Two way Bib cock with Wall Flange (As per Cat. No.F1015163 of CERA)
359	CP soap dish holder (AS PER F5013116CH OF CERA)
360	C.P. Toilet Roll holder with stainless steel flap (As per Cat no.F5013110CH of CERA)
361	150mmX150mm square anti cockroach trap
362	32mm Half Thread Waste Coupling (As per F8050102 OF CERA)
363	32mm Full Thread Waste Coupling (F8050101 OF CERA)
364	15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . (As per F8070402 OF CERA)
365	Extension Piece (15 x 25 mm) (As per CERA, Cat. No.: F8070301)
366	32mm dia C.P. Coat Hook (Double) (As per Cat. No. F5003108 OF CERA)
367	32mm dia CP on Brass Bottle Trap (As per Cat. No. F8060101 OF CERA)
368	Providing all materials, labour, T&P for fixing of following sizes of mirror 700 x 500 mm 5 mm thick glass mirror with doublecoat for protection and longevitygrounded edges for safety and silverplating on the back for better reflection in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.
369	Mirror (700x500mm) (Cat. No: B3510114 of CERA)
370	Pressmatic Pillar Cock (Cat. No: F9020101 of CERA)
371	Providing all materials, labour, T&P for fitting and fixing HPL Urinal partition Made of 12 mm thick compact laminate total height 1195 mm , Depth 450 with duties, transportation etc. all complete as per specification & direction of Engineer-in-charge. (Make: Greenlam/Merino)
372	SS 304 Storage Cooler cum RO+UV Water Purifier 80 lit Capacity 60 ltr per hr cooling capacity, 80 ltr storageModel-AG Green Pure Chill 80SS UV (Eureka Forbes/Kent)
373	Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:ASTRAL/ASHIRVAD
374	110mm dia soil & Waste pipe
375	Providing all materials, labour, T&P for laying/fixing of following dia uPVC pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD
376	50mm dia
377	Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC. Make:ASTRAL/ASHIRVAD
378	110mm Pushfit Coupler
379	110mmx87.5º bend
380	110mmx87.5º door bend
381	110mmx45º bend
382	110mm dia Single Tee
383	110mm dia Single Tee with Door
384	110mm dia Single 'Y'
385	110mm dia Single 'Y' with Door
386	110mm dia Double 'Y'
387	PVC Clamp Suitable for 110mm dia pipe
388	110mm dia Vent cowl
389	110mm Socket plug
390	Multi floor trap
391	Supplying all materials,labour,T&P and fixing three layer Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required height above ground level and placing the tank to the required position and providing flyash brickwork in cement mortar (1:4) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:4) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. (Make -Sintex/Supreme)
392	2000 Litres Capacity Triple Layer Tank white
393	Providing and laying of 600mm x 600mm Non-Skid Ceramic floor tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.)(Make:Somany/Jhonson/RAK/Kajaria)
394	Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/kajaria)
395	Providing Cleaning the rooftop/sunken surface by using1. Water Proof Coating- Cold applied water based modified polyurethane hybrid elastomeric waterproof membrane at minimum 0.8mm dft in one coat having solids by volume:620/o, Tensile Strength ASTMD412:1.75MPa, elongation ASTMD412>350%, Tear Strength ASTMD624:13N/mm, Adheshion to substrate;1.9MPa concrete, Crack Bridging static/dynamic:2mm ASTM C836, Resistance to water: 10m pressure & SRI ValuelOG for white to be used on the roof including parapet wall surface as per manufacturer direction.2. Coving at right angle- All right angle junctions between floor and wall shall be provided with coving of size 75mmx75mm minimum 15mm thickness in cement mortar 1:4 admixed with FOSROC/SIKA/equivalent chemicals @ 2 litres per 50kg of cement after saturating the surface with water and applying a slurry primer coat.3. Protective Coating- Providing and applying PU Coating FOSROC/SIKA/equivalent on the applied waterproofing surface as per manufacturer direction.(Make:MYK / Fosroc /Tremco Pvt.Ltd./Pidilite /Sika/Sunanda )
396	Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.(Make: WPC Door Frame: Century/Black Cobra/Rajshri Plastiwood)Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
397	Providing and fixing of 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)
398	Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '100' mtr.
399	Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.
400	Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
401	Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.
402	Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
403	Providing all materials required for construction of brick masonry chamber for encasing the production well with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick on base & 100mm thick on top of the chamber, encasing the annular area of casing pipe with cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm height including form work, filling the inside cavity with sand, C.C. 1:2:4 on top of the chamber of 50mm thick, 12mm thick cement plaster 1:4 on outer wall & top surface, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed with smooth finishing. The height of chamber should be 450mm from G.L. The cost inclusive of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
404	Outer size 1400mm x 1400mm x 1200mm ht. chambers
405	Supplying all materials, labours, T&P and providing fitting & fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase /1 phase line voltage ranging from 320 volt to 450 volt conforming to Si 8034/89 with following specifications with suitable control panel ,jointing with GI/PVC/HDPE pipes,electrification,testing, commissioning ,trial running, conveyance of all materials to worksite , payment of taxex etc all complete as per specification & direction of the Engineer in charge. Make- KIRLOSKAR/XYLEM
406	Submerssible Pump Set 1.00 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 6110 L.M.P with outlet dia of 32 mm.
407	DOL control panel
408	2.50 sqmm cable
409	32mm dia steel short piece
410	32 mm dia HDPE Pipe
411	Bore Cap
412	C.I.Bracket
413	Rope Wire
414	Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75 kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royality, cost, conveyance etc. all complete as per specification & direction of EIC.
415	250mm x 250mm x 250mm deep gully trap.
416	Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-456 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of CI manhole cover with frame (100 kg) for opening of 600x600mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
417	Inner size 760mm x 760mm x 460mm depth.
418	Providing all materials, labour, T&P required for construction of RCC M-25 man hole chamber of following sizes having cube strength 200 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm, 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed).
419	PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling the foundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame ( heavy duty) for clear opening 560mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC.
420	Manhole chamber of Inner size 910mmx910mmx 910mm depth.
421	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. (Excluding cost for earth wok, back filling which will be paid separately).
422	160mm dia u-pvc pipe alround concrete
423	Construction of 1 nos 50 users RCC Septic Tank of inner size 5.00x1.6x1.40m liquid depth of 2 year cleaning interval. & 2 nos of Soak Pit of Inner Dia 1.50m & depth 3.00mEarth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
424	Upto 1.5 m depth
425	1.5m to 3 m depth
426	Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
427	Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
428	Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
429	Providing all materials, labour, T&P for laying R.C.C. M-25 having minimum cube strength of 200 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge. & Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
430	(A)R.C.C. walls
431	(B)R.C.C. Floor and Roof slab
432	(C)R.C.C. Beams, columns, grider and bressmer etc.
433	(D)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
434	Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
435	Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
436	Man hole cover with frame 500mm frame with MHCover
437	Providing, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
438	Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-B) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
439	Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
440	Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.
441	Providing all material, labour & T&P for filling the both inner & outer surface of soak pit with 40mm size hard granite hand broken metal etc. complete including lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
442	Providing all material, labour, T&P for Fly ash Brick masonry work using Fly ash of 23cm X 12 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. in cement mortar (1:6) including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge. Foundation & Plinth
443	Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC.
444	12mm thick C.P. 1:4 outer plaster
445	12mm thick C.P. 1:4 with punning innersurface
446	12mm thick C.P. 1:4 with punning and bitumen painting over wall top.
447	Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD
448	32mm dia
449	25mm dia
450	20mm dia
451	Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD
452	32mm dia in ground floor
453	Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC. in ground floor
454	Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.
455	For 250mm thick wall in ground floor
456	Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge. In ground floor
457	Providing all materials, labour, T&P for fitting & fixing of following Brass Ball Valves with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO/LEADER
458	32mm dia ball valve
459	25mm dia ball valve
460	Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china floor mounted one piece water closet (European pattern) of size with P Trap with seat cover (solid) of approved make in all floor Flush tank with frame, flush plate including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA. Rate as per CERA S1013221 or equivalent
461	Supply all materials and labour for fitting and fixing of following size white glazed vitreous china Half Padestal wash hand basin of size 630 x 470 x 205 mm of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. including all duties, transportation etc. all complete as per direction of EIC. Make : JAQUAR/HINDWARE/CERA. Rate as per CERA S2040112 & S2090120 with Fixing Accessories
462	Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china top inlet urinal of confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA .Rate as per CERA S4020104 or equivalent
463	Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA. Rate as per HINDWARE 70002 or equivalent
464	Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. Make : JAQUAR/HINDWARE/CERA
465	Hand Shower (Health Faucet) Health Faucet ABS bodywith 1 meter SS braided connection pipe & Wall Hook (As per Cat. No F8030109AB of CERA)
466	15mm dia Angular Stop Cock with wall flange (As per CERA F1015201)
467	Two way Bib cock with Wall Flange (As per Cat. No.F1015163 of CERA)
468	CP soap dish holder (AS PER F5013116CH OF CERA)
469	C.P. Toilet Roll holder with stainless steel flap (As per Cat no.F5013110CH of CERA)
470	150mmX150mm square anti cockroach trap
471	32mm Half Thread Waste Coupling (As per F8050102 OF CERA)
472	32mm Full Thread Waste Coupling (F8050101 OF CERA)
473	15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . (As per F8070402 OF CERA)
474	Extension Piece (15 x 25 mm) (As per CERA, Cat. No.: F8070301)
475	32mm dia C.P. Coat Hook (Double) (As per Cat. No. F5003108 OF CERA)
476	32mm dia CP on Brass Bottle Trap (As per Cat. No. F8060101 OF CERA)
477	Providing all materials, labour, T&P for fixing of following sizes of mirror 700 x 500 mm 5 mm thick glass mirror with doublecoat for protection and longevitygrounded edges for safety and silverplating on the back for better reflection in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.
478	Mirror (700x500mm) (Cat. No: B3510114 of CERA)
479	Pressmatic Pillar Cock (Cat. No: F9020101 of CERA)
480	Providing all materials, labour, T&P for fixing Overhead Shower ø230mm Round Shape (ABS Body & Face Plate Chrome Plated) & Overhead shower arm 450 mm (18”) with wall flange and telephonic shower (F7010602AB,F7040206,F7030313AB of CERA)
481	Single Lever Exposed Parts Kit of Hi-flow Diverter (F1021721 OF CERA)
482	Concealed body for single lever highflow diverter F4030101 OF CERA
483	Spout with wall flange (F1021662 OF CERA)
484	Providing all materials, labour, T&P for fitting and fixing HPL Urinal partition Made of 12 mm thick compact laminate total height 1195 mm , Depth 450 with duties, transportation etc. all complete as per specification & direction of Engineer-in-charge. (Make: Greenlam/Merino)
485	SS 304 Storage Cooler cum RO+UV Water Purifier 80 lit Capacity 60 ltr per hr cooling capacity, 80 ltr storageModel-AG Green Pure Chill 80SS UV (Eureka Forbes/Kent)
486	Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:ASTRAL/ASHIRVAD
487	110mm dia soil & Waste pipe
488	Providing all materials, labour, T&P for laying/fixing of following dia uPVC pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD
489	50mm dia
490	Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC. Make:ASTRAL/ASHIRVAD
491	110mm Pushfit Coupler
492	110mmx87.5º bend
493	110mmx87.5º door bend
494	110mmx45º bend
495	110mm dia Single Tee
496	110mm dia Single Tee with Door
497	110mm dia Single 'Y'
498	110mm dia Single 'Y' with Door
499	110mm dia Double 'Y'
500	PVC Clamp Suitable for 110mm dia pipe

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Services Tenders

Tour and Travel Services Tenders

Tour and Travel Agency Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Development Of Pradhanpat Integrated Eco-Tourism Circuit, Deogarh., Deogarh-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Development Of Pradhanpat Integrated Eco-Tourism Circuit, Deogarh., Deogarh-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us