|
| 1 | Supply & Installation of Automatic Honey Bottling filling machine with Sensor Based calibrator including with Filling Range (50 grams to 1000 grams), Outout/Min (Any size within range 3000 to 5000 BPD), Filling system (Pneumatic VMP System synchronize with SERVO MOTOR), Direction of Movement (Left to Right), Number Of Head/Syringe (Single), Drop Controller (Y- Pneumatic Stopper), Calibration of machine (Automatic with Sensor), Inlet material stopper (FG valve), Feed Tank (Direct connected), Feed Tank Overflow Controller (Float type), Material Feed in M-tank (Automatic), Heating Arrangement in M-Tank (Water Bath System), Material Shaker in M-Tank (Electrical Shaker), Bath Temperature & Material Temperture Monitoring System (Full auto-control with CCP), Electric Spply (230 cm V/50HZ), Tempreture controller (PID), Machine Dimensions (250 cm x 100 cm x 210 cm (Approx) and Net Weight (300 Kg). etc all complete with ISI marked. |
| 2 | Supply & Installation of Automatic Linear Capping Machine including with Output/Hour (Any size with range 4000 BPD), Direction of Movement (Left to Right ), Machine dimensions (180 cm L x 90 cm W x 170 cm H (Approx)), Sensor (Panasonic), Pneumatic Accessories (SPAC) and No Bottle- no cap (Yes). etc all complete with ISI marked. |
| 3 | Supply & Installation of Automatic Round bottle Sticker Labelling Machine including with Output/Hour (10000 BPD), Direction of Movement (Left to Right), Controlling (Micro controller base MM Interface), Conveyor motor (0.25 HP/415 V/ 50 HZ), Pressing device motor (60 watt / 220 V/ 50 HZ), SERVO MOTOR (750 Watt), Label Accuracy (+/-1mm), Gap Sensor (U-type), Bottle Spacer (Electronic), Variable Speed (40 BPM-Max), HMI & PLC (7 Inch coloured Touch Pad type), Pneumatic (SPAC), Pressure roller (Sillicon), Adjustment (Lead Screw), Label Size (Up to 100 mm width), Bottle Dia (Up to 120 mm Dia), Batch Counter (yes) and Online Data Indication (yes) etc. all complete with ISI marked. |
| 4 | Supply & Installation of AIR COMPRESSOR including with Type (Reciprocating), Tank Volume (250 LTR), Pressure Range (10 kg/ cm 2), No of Head-(02 Nos.), Type (Industrial) and Operation (Continue) etc. all complete with ISI marked. |
| 5 | Supply & Installation of Induction Sealing including with Automatic Induction sealing Machine etc. all complete with ISI marked. |
| 6 | Supply & Installation of Turn Table including with 750 mm Dia Turn Table MOC SS304, Motor - 0.5 HP/440 VAC, VFD - INVT/DELTA and Model -cGMP etc. all complete with ISI marked. |
| 7 | Supply & Installation of Packing Conveyor including with 10 Feet Long Packing Coveyor, Width of Conveyor 300 mm, Motor - 0.5 HP/440 VAC and Model - cGMP etc. all complete with ISI marked. |
| 8 | Supply & Installation of Auto Honey Feed Pump including with Automatic Honey Feed System for Filling Machine from Plant etc. all complete with ISI marked. |
| 9 | Supply & Installation of Bottle Washing Machine including with Automatic Bottle cleaning Machine Tilting Action type etc. all complete with ISI marked. |
| 10 | Supply & Installation of Particle Inspection Table including with Online Particle Checker etc. all complete with ISI marked. |
| 11 | Supply & Installation of Online Printer including with Online Ink Jet Printer etc. all complete with ISI marked. |
| 12 | Supply & Installation of Slate chain conveyor including with SS304 Slate Chain conveyor, Motor - 0.5 HPx 3 nos, VFD - 3 nos and Guider - as per design etc. all complete with ISI marked. |
| 13 | Supply & Installation of AUTOMATIC WAX SHEET FOUNDATION MILL including with Sheet making Roller set (Cell size 5.4 mm, Length ,600 mm, Dia 200 mm), Cold water circulation system 0.5 hp, Conveyor belt length - 300 mm, Sheet cutting system, Water cooling system 1.5 - ton cap, Wax Malting Tank, Wax Filtration System, SS tray, SS Bucket, Operation by HMI, Data Recorder and Data Integrity by Ethernet to PL etc. all complete with ISI marked. |
| 14 | Supply and installation of Hand held refractometer for Moisture with ISI marked for Honey plant lab |
| 15 | Supply and installation of Electronic analytical digital balance with ISI marked for Honey plant lab |
| 16 | Supply and installation of Muffle Furnace with ISI marked for Honey plant lab |
| 17 | Supply and installation of Hot air oven with controller with ISI marked for Honey plant lab |
| 18 | Supply and installation of Laboratory water bath with ISI marked for Honey plant lab |
| 19 | Supply and installation of Double beam Spectrophotometer with ISI marked for Honey plant lab |
| 20 | Supply and installation of Laboratory Digital Refractometer with ISI marked for Honey plant lab |
| 21 | Supply and installation of Laboratory centrifuge machine with ISI marked for Honey plant lab |
| 22 | Supply and installation Hemocytometer with ISI marked for Honey plant lab |
| 23 | Supply and installation of Microscope maginification with ISI marked for Honey plant lab |
| 24 | Supply and installation of Magnetic stirrer with ISI marked for Honey plant lab |
| 25 | Supply and installation of Laboratory moisture balance with ISI marked for Honey plant lab |
| 26 | Supply and installation of pH & EC digital meter with ISI marked for Honey plant lab |
| 27 | Supply and installation of Hand Held pH/TDS/ Conductivity/Temp meter with ISI marked for Honey plant lab |
| 28 | Supply and installation of Mercury tempreture meter with ISI marked for Honey plant lab |
| 29 | Supply and installation of Elisa reader for honey with ISI marked for Honey plant lab |
| 30 | Supply and installation of Water bath with ISI marked for Honey plant lab |
| 31 | Supply and installation of Tripod stand with ISI marked for Honey plant lab |
| 32 | Supply and installation of Wire gauge with ISI marked for Honey plant lab |
| 33 | Supply and installation of Viscosity meter with ISI marked for Honey plant lab |
| 34 | Supply and installation of Test tube stand with ISI marked for Honey plant lab |
| 35 | Supply and installation of Burette stand with ISI marked for Honey plant lab |
| 36 | Supply and installation of Heating mental with ISI marked for Honey plant lab |
| 37 | Supply and installation of Retort stand with clamp set with ISI marked for Honey plant lab |
| 38 | Supply and installation of Rubber cord as per flack with ISI marked for Honey plant lab |
| 39 | Supply and installation of Rubber Tube with ISI marked for Honey plant lab |
| 40 | Supply and installation of Enamel Tray with ISI marked for Honey plant lab |
| 41 | Supply and installation of Computer and Scanner Cum Printer with ISI marked for Honey plant lab |
| 42 | Supply and installation of Glass ware with ISI marked for Honey plant lab |
| 43 | Supply and installation of Wooden band saw machine with ISI marked for carpentary workshop |
| 44 | Supply and installation of Double end Spindle Moulder Machine with ISI marked for carpentary workshop |
| 45 | Supply and installation of Dust Collector with ISI marked for carpentary workshop |
| 46 | Supply and installation of Straight saw with slider with ISI marked for carpentary workshop |
| 47 | Supply and installation of Slide planner and moulder with ISI marked for carpentary workshop |
| 48 | Supply and installation of Universal wood working machine with ISI marked for carpentary workshop |
| 49 | Supply and installation of Panel saw with c-canter with ISI marked for carpentary workshop |
| 50 | Supply and installation of Hammer for wood work with ISI marked for carpentary workshop |
| 51 | Supply and installation of Jig saw with ISI marked for carpentary workshop |
| 52 | Supply and installation of File with ISI marked for carpentary workshop |
| 53 | Supply and installation of drilling machine with ISI marked For carpentary workshop |
| 54 | Supply and installation of Mailerwith ISI marked for carpentary workshop |
| 55 | Supply and installation of Measuring tape with ISI marked for carpentary workshop |
| 56 | Supply and installation of Measuring tool with ISI marked for carpentary workshop |
| 57 | Supply and installation of Safety googles with ISI marked for carpentary workshop |
| 58 | Supply and installation of Safety helmet with ISI marked for carpentary workshop |
| 59 | Supply and installation of Hand tool set with ISI marked for carpentary workshop |
| 60 | Supply and installation of Working table with ISI marked for carpentary workshop |
| 61 | Supply and installation of Tool box with ISI marked for carpentary workshop |
| 62 | Supply and installation of Air compressor with ISI marked for carpentary workshop |
| 63 | Supply and installation of Paint gun with ISI marked for carpentary workshop |
| 64 | Supply & Installation of Honey Pre Dumping Station including with technical specification:- (1).Capacity - per batch 1000 kg, (2). MOC - 316L, (3). Thickness - not Less Than 3 mm, (4). Size - 1000x4000 mm, (5).Chamber Size - 500 kg x 2 Nos, (6).Heating system - Electrically or with solar system, (7).Temperature sensor - PID, (8). Temperature controller system - HMI, (9). Data Recorder - 10 batch, (10). Insulation - hot insulation with density 140 kg/m, (11).Cladding MOC - SS304, (12). Welding Laser Welding only, (13). Finishing - grit 1200, (14). Design - as per USFD & NHRM standrad e.g. 21CFR211 and CCP Requirements are :- (1). Batch temperature graphical record w.r.t time, (2). Batch data in excel format to PC etc all complete with ISI marked. |
| 65 | Supply & Installation of Honey Batch Preparation Station including with technical specification:- (1).Capacity - per batch 1000 kg, (2). MOC - SS316L, (3). Thickness - not Less Than 3 mm, (4). Nos of station - 2, (5).Chamber - Closed with 12 mm Glass, (6).Honey screening - with first 18 mesh then 80 mesh, (7). Heating System - with hot water or solar system, (8). Stop of station 1:1.5, (9).Temperature sensor - PID, (10). Temperature controller system - HMI, (11). Data Recorder - 10 batch, 12. Load cell - in all legs, (13). Insulation - hot insulation with density 140 kg/m, 14.Cladding MOC - SS304, 15. Welding - Laser Welding Only, 16. Finishing - grit 1200, (17). Design - as per USFD & NHRM standard e.g. 21CFR211 and CCP Requirements are :- (1). Batch temperature graphical record w.r.t time, (2). Batch data in excel format to PC, (3). Batch weight record in PC 4. Time of operation data recording etc all complete with ISI marked. |
| 66 | Supply & Installation of Honey Transfer pump including with technical specifications :- (1). Type of pump - zero holdup, (2). MOC - SS316L, (3). Leal - Leakproof Mechnical Seal, (4). RPM - not more than 960, (5). Flow rate - mininum 50m kg per mint, (6). Intel/outlet - 40 mm with triclover fitting, (7). Motor capacity - 2 HP/440VAC, (8). Coupling type - universal coupling, (9). VFD - Delta /INVT, (10). Safety Guard - SS304, (11). Motor Make - ABB/ cG/ Bharat Bijlee/Hevals/Kariloskar/Siemens, (12). Nos of Pole- 4 Pole and CCP Requirements are :- (1)- Motor RPM data in HMI, (2)- Run Time recording etc all complete with ISI marked. |
| 67 | Supply & Installation of Honey Heating Vessel including with technical specifications :- (1). size - 1200 kg, (2). working capacity - 1000 kg, (3).MOC - SS316, (4). Shell thickness - not less than 3 mm, (5). Jacket - pillow plate with 1.5.3 mm, (6).Insulation - hot insulation - with density 140 kg/m, (7). Finishing - grit- 1200, (8). Bottom - conical, (9). Bottom valve - TC end ball valve, 10. Stiffer ring -2 nos of SS304 ISMC75x40, (11). Top - conical with slop 1:1.2, (12)-Agitator-Blade Paddles type, (13). Agitator shaft - 40 mm Direct driven, (14). Main hole - 540 mm, (15). Internal cleaning system - double CIP valve counter direction, (16). Gear Motor - 2 HP/440VAC, (17). RPM - 40, (18). VFD - INVT/DELTA, (19). Temperature sensor - PID, (20). Temperature controller system - HMI, (21). Cladding MOC - SS304, (22). Welding - Laser Welding Only, (23). Heating media - hot water/solar system, (24). Design - as per USFD & NHRM standard e.g. 21CFR211 and CCP Requirements are :- (1). Batch tempreture graphical record w.r.t time, (2). Batch data in excel format to PC, (3). Motor rmp Data recording, (4). Time of operation data recording, (5). Hot water Temperature data graphical recording etc all complete with ISI marked. |
| 68 | Supply & Installation of Honey Dehydrator including with technical specifications :- (1). Type - counter falling film evaporator, (2). MOC - SS316L, (3). Orientation - Conical Vertical, (4). Capacity - 1000 kg, (5). Operation - closed cycle, (6). Coloumn design - As per Thermal Standrard, (7). Product open Surface Area to Height ration - 1:1, (8). Vacuum capacity - 700 mm Hg, (9). Shell thickness - minimum 4 mm, (10). Jacket - pillow plate with 1.5:4 mm, (11). Cladding - SS304, (12). Welding - Laser Welding Only, (13). Finishing - Grit 1200, (14). View Glass - 6 - inch dia Teflon Glazed glass 12 mm, (15). View Light - opposite to view glass, (16). Vacuum Gauge- 4-inch Dial Gauge glycerin filter SS body, (17). Vacuum sensor - round cylindrical, (18). Vacuum safety valve - at pump, (19). Pressure Release valve - TC end 15 mm with U bend TC, (20). Vapor absorption heat exchanger - minimum 38 m2, (21). Reflex Tank - SS304, (22). Volume LI - Side Mounted with Scale, (23). Slight Glass - 40 mm, (24). Cooling Fluid - Cooling water, (25). Cooling tower - 40 TR, (26). Type - FRP Induced Draft Bottle Type, (27). Temperature -differance - Delta 6 C, (28). Wet bulb Temperature - 28.3 C 29. Flow Rate - 25 L/M, (29)- Flow Rate-25L/M, (30). Heat Rejection - 150000 Kcal/Hrs, (31). Cleaning of Dehydrator - by CIP Ball, (32). Temperature sensor - PID, (33). Temperature controller system - HMI, (34). Design - as per USFD & NHRM standard e.g. 21CFR211 and CCP Requirements are :- (1). Batch temperature graphical record w.r.t time, (2). Batch data in excel format to PC, (3). Vacuum Data recording graphically, (4). Time of operation data recording, (5). Hot water Temperature data graphical recording, (6). Reflex water data entry point manually etc all complete with ISI marked. |
| 69 | Supply & Installation of Zero Holdup Sparkler Filter including with technical specifications :- (1). Dia - 18 Inches, (2). No of plate - 18 nos, (3). MOC - SS316, (4). Capacity - 2000kg/hrs, (5). Pressure Release Vale - 15 mm with U bend TC ends, (6). Pressure Gauge - 50 mm Dial gauge 0-7 kg/cm 2 glycelin filled, (7). syphon tube - SS304, (8).filter pours - 5 microns, (9). Design - as per USFD & NHRM standard e.g. 21CFR211 and CCP Requirements are :- (1). Batch Filteration time in excel format to PC, (2). Pressure feed colon start and at end time manually etc all complete with ISI marked. |
| 70 | Supply & Installation of Inter Cooler including with technical specifications :- (1). Type - counter flow shell & tube Type, (2). Heat Transfer Area - 42 Sqm, (3). MOC of Tube - SS316, (4). Outer Body - SS304, (5). Finishing - Grit 1200, (6). Cooling Fluid - Raw CTW water, (7). Temperature sensor - PID, (8). Temperature controller system - HMI, (9). Welding - Laser Welding Only, (10). Design - as per USFD & NHRM standrad e.g. 21CFR211 etc all complete with ISI marked. |
| 71 | Supply & Installation of Final Storage Tank including with technical specifications :- (1). size - 2200 kg, (2). working capacity - 2000 kg, (3).MOC - SS316, (4). Shell thickness - not less than 3 mm, (5). Jacket - pillow plate with 1.5.3 mm, (6).Insulation - hot insulation - with density 140 kg/m, (7). Cladding - SS304, (8). Finishing - grit- 1200, (9). Bottom - conical, (10). Bottom valve - TC end ball valve, (11). Stiffer ring -2 nos of SS304 ISMC75x40, (12). Top - conical with slop 1:1.2, (13). Agitator - Blade Paddles type, (14). Agitator shaft - 40 mm Direct driven, (15). Main hole - 540 mm, (16). Internal cleaning system - double CIP valve counter direction, (17). Gear Motor - 2 HP/440VAC, (18). RPM - 40, (19). VFD - INVT/DELTA, (20). Temperature sensor - PID, (21). Temperature controller system - HMI, (22). Welding - Laser Welding Only, (23). Heating media - hot water/solar system, (24).Load Cell - in all Legs, (25). Design - as per USFD & NHRM standard e.g. 21CFR211 and CCP Requirements are :- (1). Product temperature graphical record w.r.t time, (2). Final Finish good Weight data recording etc all complete with ISI marked. |
| 72 | Supply & Installation of CIP SYSTEM including with technical specifications :- Integrated SIP system for Cleaning of Processing Plant etc all complete with ISI marked. |
| 73 | Supply & Installation of Dry Hot Air Generation System for After CIP of Plant including with technical specifications :- (1). Hot Air Heater Bank, (2). Blower - High Pressure Pipe Blower, (3). Air HEPA Filter - 0.1 Micron, (4). Pre - Filter - 5 Micron, (5). Temperature sensor - PID, (6). Temperature sensor - Pt-100, (7). Cycle time 30 mint etc all complete with ISI marked. |
| 74 | Supply & Installation of Hot water generator including with technical specifications :- (1). Oil fired/gas fired/ eletrical with combination of solar system, (2). Capacity - 1500 LTR etc all complete with ISI marked. |
| 75 | Supply & Installation of Centrifugal Pump including with technical specifications :- For transfer of hot water and CTW etc all complete with ISI marked. |
| 76 | Supply & Installation of Filter pad set including with technical specifications :- As per flora of honey etc all complete with ISI marked. |
| 77 | Supply & Installation of Electrical panel including with technical specifications :- SS304 with TFT window Monitor System access to Ethernet etc all complete with ISI marked. |
| 78 | Supply & Installation of Connection pipe and fitting including with technical specifications :- All valve should be SS316 TC ends, All pipe should be SS316, All welding will be done with Orbital Welding and All gasket should be of Sillicon rubber etc all complete with ISI marked. Please Enable Macros to View BoQ information |
