|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 2 | M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6 complete all as speciifed and as directed |
| 3 | Ditto all as per ITEM No.2 above but except stone |
| 4 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm complete all as speciifed and as directed. |
| 5 | M & L for Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and as directed. |
| 6 | M & L for Flush pointing to random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed. |
| 7 | M & L for Cement concret of type C1, 1:3:6 of (20 mm aggregate) in Coping , lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 8 | M & L for Cement concret of type B1, 1:2:4 of (20 mm aggregate) as in Surface chennel/drains complete all as specified and as directed. |
| 9 | Extra for forming fair finished drain or channel not exc 60 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 10 | M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed complete all as specified and as directed.. |
| 11 | Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc. |
| 12 | M & L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair Complete all as specified and s directed.. |
| 13 | Material & Labour prepartion of new plastered surfaceand Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. Note : All wrok shall be carrried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work |
| 14 | Complete Removal of existing treatment on wall by vacumbased sanding machine removal of nails etc & fillng cracks and applying Acrylic Smooth exterior paint of required shade : New work (Two Coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using mechanical tool/auto roller complete all as specified and directed. (a) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work. |
| 15 | Material & Labour for preparation of old plastered/painted surface of walls and applying one coat of Acrylic Smooth exterior paint of required shade complete all as specified and as directed. |
| 16 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 17 | M & L for providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, chajjas, water troughs, mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed. |
| 18 | Demolition of Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 19 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry complete all as specified |
| 20 | M & L for 75 mm thick Plain Cement concret of type D2, 1:4:8 (40 mm graded aggregate) in Subbase complete all as specified. |
| 21 | M&L Coloured chequered cement concrete tiles with grey and any pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and incl cement screed 15mm thick in 1:6 all as specified and directed |
| 22 | M&L sand filling 50mm thick under paver blocks for cushion Complete all as specified and directed. |
| 23 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment, Complete all as specified and directed. |
| 24 | All as per ser item No 23 above but except paver blocks complete all as specified and as directed by Engr-in-charge. |
| 25 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.. |
| 26 | Cleaning/Desilting of bed of drains constructed in any masonry, of any depth including removal of vegitation growth or bushes, roots and getting out including disposing off excavated silt, soil, vegitation, shrubs etc. to a distance not exc 100m where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 27 | S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed. |
| 28 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry etc including taking out embedded portion and making good disturbed ground |
| 29 | Dismantling fencing wire mesh, any type, all as directed and as specified |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed |
| 31 | M & L Preparing old unplastered/plastered surfaces of walls and applying one coat of white wash on walls complete all as specified and as directed. |
| 32 | M & L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete |
| 33 | M & L for plain cement concrete type C1 1:3:6 (20 mm graded aggregate) as in foundations, filling and mass concrete for embedding the vertical fencing posts |
| 34 | M & L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) set in cement mortar 1:4 as in columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rageblocks, bonders(for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers,weatherings, throating etc. and setting in mortar complete with joints to match |
| 35 | S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips |
| 36 | S & F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 37 | S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 38 | S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing confirming to Fe 410 -W (GdeE- 250) complete all as specified and as directed. |
| 39 | M & L for 1.00mm thick Mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required |
| 40 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 41 | Supply only Chain link MS galvanisd fencing, any size or type n exc 4 kg/sqm all as specified and as directed |
| 42 | Supply only mild steel TMT bar 8 to 10mm size for using fencing complete all as specified and as directed |
| 43 | M & L for providing 50mm thick precast cement Type B0 1:2:4 (12.50mm aggregate louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in Cement mortar 1:4 complete all as specified and as directed. |
| 44 | M & L for Providing precast RCC Type B2 1:2:4 (20mm aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match with CM 1:4 complete all as specified and as directed. |
| 45 | S & F in Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm rredia barbs at 75mm spacings and straining and fixing to any type of standardrails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 46 | M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide prime |
| 47 | M & L for preparation of new steel surfaces of any description, n exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide prime |
| 48 | Material and labour for preparation of old decorated surfaces of walls and applying one coats of colour wash complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge. |
| 50 | Material & Labour for preparation of old plastered/painted surface of walls and applying one coat of Acrylic Smooth exterior paint of required shade complete all as specified and as directed. Please Enable Macros to View BoQ information |
