|
| 1 | Cutting the bushes, weed, and disposal of rubbish material to a distance n.exc 50m from site and clear for access the compound wall (1.0m from edge of compound wall) for colour washing etc., complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for preparation of old painted steel surfaces of any description exc 10cm width (or) girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for preparing old painted decorated wall surfaces and applying one coat of cement base paint complete all as specified and as directed by Engr-in-charge. |
| 4 | Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 5 | Material and labour for old size brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redius built in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 6 | Taking down cement plaster on brick or stone walls etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 8 | Material & Labour prepartion of new plastered surfaceand Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. Note : All wrok shall be carrried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work |
| 9 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge. |
| 10 | Racking out joints/ pointing to square rubble masonary coursed or uncoursed and brought up to course work built in cement mortar complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for keyed pointing to random rubble masonry brought upto courses in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 12 | Complete Removal of existing treatment on wall by vacumbased sanding machine removal of nails etc & fillng cracks and applying Acrylic Smooth exterior paint of required shade : New work (Two Coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using mechanical tool/auto roller complete all as specified and directed. (a) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved from GE before carrying out the work. |
| 13 | Demolition of Concrete of any description andin any position not otherwisespecifically provided forand removing debris outside MD Land complete all as specified and directed. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for all as specified and as directed |
| 15 | S & F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing, gates and including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 16 | S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing confirming to Fe 410 -W (GdeE- 250) complete all as specified and as directed. |
| 17 | M & L for 1.00mm thick Mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required |
| 18 | M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide prime |
| 19 | M & L for providing, plain cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate ) as in bed plates, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and as directed by engr-in-charge |
| 20 | Demolition of stone tiles/slabs of any description or thickness in floors , approns laid bedded and pointed in any mortar . |
| 21 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.. |
| 22 | Supply and fix in repairs 900mm dia razor blade galvanised barbed concertina coil having minimum weight of 8Kg (+) or (-) 5% per coil of 2.6mm dia wire streched to a length of 5 to 6 m as in fencing to steel posts and to another coil/ MS nibs including fixing with special galvanised fasterners such as J clips, C clips, U clips complete all as specified and as directed by Engr-in-charge.Note: After streching the coil, the length of the compound wall on which it has been streched shall be considered for measurement. |
| 23 | Supply and fix in repairs 600mm dia razor blade galvanised barbed concertina coil having minimum weight of 8Kg (+) or (-) 5% per coil of 2.6mm dia wire streched to a length of 5 to 6 m as in fencing to steel posts and to another coil/ MS nibs including fixing with special galvanised fasterners such as J clips, C clips, U clips complete all as specified and as directed by Engr-in-charge.Note: After streching the coil, the length of the compound wall on which it has been streched shall be considered for measurement. |
| 24 | Supply and fix in repairs galvanised iron, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and pran of glavanished mild steel wire, staples or steel pins etc (each line of wire to be masured) complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
