|
| 1 | Excavation in trenches not. exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out complete all as specified and directed in :-(a) Soft soil |
| 2 | (b) Hard/dense soil |
| 3 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and directed. |
| 4 | Removing surplus soil and depositing to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-Chagre. |
| 5 | Taking up or down following size GI water tubing including removing of all necessary connections/fittings as specified and directed by Engineer in Charge.(a) 15 mm dia |
| 6 | (b) 20 mm dia. |
| 7 | (c) 25 mm dia |
| 8 | (d) 40 mm dia |
| 9 | (e) 50 mm dia |
| 10 | (f) 80 mm dia(Note for item No 5 to 10 excavation and earth work as required shall be measured & paid separately). |
| 11 | Relaying and refixing the GI pipe after descaling / cleaning complete with the help of water & brush of the following size / bore obtained from Sl item No 5 to 10 above and connect in old / new positions, laid in trenches fixed on wall / floor including provision of new fittings such as bends, tee, unions, elbows, sockets etc complete all as specified and directed.(a) 15 mm dia. |
| 12 | (b) 20 mm dia. |
| 13 | (c) 25 mm dia |
| 14 | (d) 40 mm dia |
| 15 | (e) 50 mm dia |
| 16 | (f) 80 mm dia |
| 17 | Supply and fix GI tubing medium grade ISI marked fixed on wall, roof, floor complete with necessary fittings such as Tees union , bend ,elbow nipple reducer etc , all as required at site for branch connection including cutting threading complete all as directedby Enginner-in-Charge.(a) 15 mm dia |
| 18 | (b) 20 mm dia. |
| 19 | (c) 25 mm dia |
| 20 | (d) 40 mm dia |
| 21 | (e) 50 mm dia |
| 22 | (f) 80 mm dia |
| 23 | Material and labour for galvanized iron water tubing medium grade ISI marked laid in trenches complete with necessary fittings such as Tees union,bend,elbow nipple reducer etc all as required at site for branch connection including cutting threading complete all as specified and directed.(a) 15 mm dia |
| 24 | (b) 20 mm dia. |
| 25 | (c) 25 mm dia |
| 26 | (d) 40 mm dia |
| 27 | (e) 50 mm dia |
| 28 | (f) 80 mm dia |
| 29 | Supply and fix in repair gun metal gate / globe valve with iron wheel head screwed both ends for iron pipe fixed complete all as specified and directed of following sizes :-(a) 15 mm dia |
| 30 | (b) 20 mm dia. |
| 31 | (c) 25 mm dia |
| 32 | (d) 40 mm dia |
| 33 | (e) 50 mm dia |
| 34 | (f) 80 mm dia |
| 35 | Material and labour for cutting of Roads / Plinth of width n. exc 0.45m and depth n. exc 0.6m for removal / laying of pipe and making good the distrubed surfaces as per existing adjoining surfaces with PCC complete all as specified and directed.Note : PCC will be measured and paid separetely. |
| 36 | Material and labour for PCC in 1:2:4 type B1 using 20 mm graded stone aggregate for making good road/foot path/hard standing/drain/ bldg plinth protection and foundation for motors, pumps and starters all as per site requirement and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 37 | Material and labour for PCC in 1:2:4 type B1 using 20 mm graded stone aggregate for making good road/foot path/hard standing/drain/ bldg plinth protection and foundation for motors, pumps and starters all as per site requirement and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
