|
| 1 | Supply, installation, testing and commissioning in replacement of indoor type LT panel board Compartmentalized for each control gear of suitable size, padestal mounted, CPRI approved totally enclosed, dust and vermin proof, front side openable, type IP 54 protection made of CRCA steel sheet 2.00 mm thick of size as per IS and having proper locking arrangement in front/back side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables, entire panel shall have a common Aluminium earth bar of size 25 mm x 5 mm at the rear with 2 Nos earth stud, Solid connections from main bus bar to switchgears/MCCB with spreader terminal and required size of Alumunium bus bars and control wiring with min 1.5 sqmm PVC insulated copper conductor cable, cable alleys Bus bar chamber, cable gland plates, and comprising with and including following accessories and mounted on angle iron frame of min 50 mm x 50 mm x 6 mm thick and hight minimum 30 cm grouted on PCC 1:3:6 Plat form min 100 mm thick. Complete with the following items housed in :- |
| 2 | BUSBAR :- 350 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). (a) Incoming :-(i) MCCB 250-320 Amps, 4 pole, 50 KA, 415 V - 01 Nos with spreader terminal. type DU400N Cat part no CM9840400Q0 of make L&T or its equivalent in Schneider or Siemens (ii) LED Multi function with meters. - 01 Nos Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Schneider (iii) LED indicating lamps-1 set (iv) SPD 3 ph 440 V, 3 P + N, I max-50 KA - 01 no Make L & T cat part no AUSP123PN50D or its equivalent in Schneider or legrand (b) Outgoing :-(i) MCCB 200-250 Amps, 4 pole, 36 KA, 440V - 01 Nos with spreader terminal type DU250 Cat part No CM98065OOPO of make L&T or its equivalent in Schneider or Siemens (ii) MCCB 63-80 Amps, 4 pole, 18 KA, 440V - 02 Nos with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens (iii) MCB 40 Amps, 4 pole, 10 KA, 440V - 02 Nos C Curve Make L & T or its equivalent in Schneider or ABB |
| 3 | All as per item no 1 above but with following rating. BUSBAR :- 900 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 4 | (a) Incoming :- (i) MCCB 422-630 Amp 4 pole, 36 KA Type DZ7-800D cat part no DZ7F0630DXD1Aoooo or its equivalent in Schneider or legran with spreader terminal>-1 Nos {ii) SPD 3 ph 440 V, 3 P + N, I max-50 KA - 01 no Make L & T cat part no AUSP123PN50D or its equivalent in Schneider or legran(iii) LED Multi function meters with CTs. - 01 Nos Make L&T Cat No.-WL441010OOOO or Equivalent make in ABB/ Legrand/Scheneider (iii) LED indicating lamps-1 set of 3 (b) Outgoing :-(i) MCCB 250-320 Amp 4 pole, 50 KA, 440V - 02 Nos with spreader terminal Type DU400N Cat part no CM9840400Q0 of make L&T or its equivalent in Schneider or Siemens (ii) MCCB 200-250 Amp 4 pole, 36 KA 440V - 01 Nos with spreader terminal Type DU250 Cat part No CM98065OOPO of make L&T or its equivalent in Schneider or Siemens (iii) MCCB 160-200 Amp 4 pole, 25 KA with spreader terminal Type DU 250C Cat part no CM90634OONO of make L&T or its equivalent in Schneider or Siemens - 01 Nos (iv) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal Type DU 250C Cat part no CM90634OOMO of make L&T or its equivalent in Schneider or Siemens -01 nos (v) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB -:02 Nos |
| 5 | All as per ser item no 1 above, but with following rating. BUSBAR :- 350 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 6 | (a) Incoming :- (i) MCCB 250-320 Amp 4 pole, 50 KA with spreader terminal Type DU400N Cat part no CM9840400Q0 of make L&T or its equivalent in Schneider or Siemens-01 Nos(ii) SPD 3 ph, 440 V, 3 P + N, I max-50 KA - 01 no Make L & T cat part no AUSP123PN50D or its equivalent in Schneider or legran (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iv) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens -02 Nos (ii) MCCB 160-200 Amp 4 pole, 25 KA Type spreader terminal DU 250C Cat part no CM90634OONO of make L&T or its equivalent in Schneider or Siemens -02 Nos(iii) MCCB 125-160 Amp 4 pole, 25 KA spreader terminal Type DU 250C Cat part no CM90634OOMO of make L&T or its equivalent in Schneider or Siemens :-02 Nos |
| 7 | All as per ser item no 1 above, but Outdoor type LT panel board with sheet thickness 3.15 mm and with following rating.BUSBAR :- 350 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 8 | (a) Incoming :-(i) MCCB 200-250 Amp 4 pole, 36 KA with spreader terminalType DU250 Cat part No CM98065OOPO of make L&T or its equivalent in Schneider or Siemens:-01 Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos(iii) LED indicating lamps-1 set of 3 (b) Outgoing (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-6 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 9 | All as per ser item no 1 above but, Outdoor type LT panel board with sheet thickness 3.15 mm and with following rating. BUSBAR :- 400 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 10 | (a) Incoming :-(i) MCCB 250-320 Amp 4 pole, 50 KA with spreader terminal Type DU400N Cat part no CM9840400Q0 of make L&T or its equivalent in Schneider or Siemens:-01 Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iii) LED indicating lamps-1 set of 3 (b) Outgoing (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-07 Nos(ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 11 | All as per ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm thick and with following rating. BUSBAR :- 350 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 12 | (a) Incoming :-(i) MCCB 200-250 Amp 4 pole, 36 KA with spreader terminal Type DU250 Cat part No CM98065OOPO of make L&T or its equivalent in Schneider or Siemens:- 01Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos(iii) LED indicating lamps-1 set of 3 (b) Outgoing :-(i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-06 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 13 | All as per ser item no 1 above, but Outdoor type LT panel board with sheet thickness 3.15 mm thick and with following rating. BUSBAR :- 400 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 14 | (a) Incoming :- (i) MCCB 200-250 Amp 4 pole, 36 KA with spreader terminal Type DU250 Cat part No CM98065OOPO of make L&T or its equivalent in Schneider or Siemens:- 01Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iii) LED indicating lamps-1 set of 3 (b) Outgoing (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-08 Nos (ii) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DN1-250C Cat part No CM90642OOMO of make L&T or its equivalent in Schneider or Siemens:-01 Nos(iii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 15 | All as per Ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm thick and with following rating. BUSBAR :- 200 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 16 | (a) Incoming :- (i) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DN1-250C Cat part No CM90642OOMO of make L&T or its equivalent in Schneider or Siemens :- 01Nos (ii) On load change over switch 4 pole 125 Amp 415 Volt type CO2-125 cat part CO21212500000 of make L&T or its equivalent in Schneider or Siemens.:-01 Nos (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iv) LED indicating lamps-1 set of 3 (b) Outgoing (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-06 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 17 | All as per ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm thick and with following rating. BUSBAR :- 250 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 18 | (a) Incoming :- (i) MCCB 125-160 Amp 4 pole, 25 KA type DN1-250C Cat part No CM90642OOMO of make L&T or its equivalent in Schneider or Siemens :-01 Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iii) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-06 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 19 | All as per ser item no 1 above but with following rating. BUSBAR :- 700 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 20 | (a) Incoming :- (i) MCCB 400-500 Amp 4 pole, 36 KA with spreader terminals type DN3-630D Cat part No CM94106OOS1OG of make L&T or its equivalent in Schneider or Siemens :- 01Nos (ii) SPD 3 ph, 440 V, 3 P + N, I max-50 KA - 01 no Make L & T cat part no AUSP123PN50D or its equivalent in Schneider or legran (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iv) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 125-160 Amp 4 pole, 36 KA with spreader terminals type DU-250 Cat part No CM98065OOMO of make L&T or its equivalent in Schneider or Siemens :-01 Nos (ii) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminals type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-04 Nos (iii) MCCB 320-400 Amp 4 pole, 50 KA with spreader terminals type DU400N Cat part No CM98404OORO of make L&T or its equivalent in Schneider or Siemens :-02 Nos (iv) MCCB 100-125 Amp 4 pole, 30 KA with spreader terminals type DU125H Cat part No CM90679OOLO of make L&T or its equivalent in Schneider or Siemens :-01 Nos (v) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 |
| 21 | All as per ser item no 1 above but with following rating. BUSBAR :- 300 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 22 | (a) Incoming :- (i) MCCB 160-200 Amp 4 pole, 25 KA with Spreader Terminal Type DU 250C Cat part no CM90634OONO of make L&T or its equivalent in Schneider or Siemens:-01 Nos (ii) On load change over switch 4 pole 200 Amp 415 Volt type CO2-200 cat part CO22000OOOA of make L&T or its equivalent in Schneider or Siemens.:- 01 Nos (iii) SPD 3 ph, 440 V, 3 P + N, I max-50 KA - 01 no Make L & T cat part no AUSP123PN50D or its equivalent in Schneider or legran :- 01 Nos (iv) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (v) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 63-80 Amp 4 pole, 18 KA with Spreader Termina type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-04 Nos (ii) MCCB 100-125 Amp 4 pole, 30 KA type DU125H Cat part No CM90679OOLO of make L&T or its equivalent in Schneider or Siemens:-01 Nos (iii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 23 | All as per ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm and with following rating.BUSBAR :- 250 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 24 | (a) Incoming :- (i) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DU250C Cat part No CM90634OOMO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (ii) On load change over switch 4 pole 125 Amp 415 Volt type CO2-125 cat part CO21212500000 of make L&T or its equivalent in Schneider or Siemens.:-01 Nos (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iv) LED indicating lamps-1 set of 3(b) Outgoing :- (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-05 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos |
| 25 | All as per ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm and with following rating. BUSBAR :- 350 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 26 | (a) Incoming :- (i) MCCB 160-200 Amp 4 pole, 25 KA with spreader terminal Type DU 250C Cat part no CM90634OONO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (ii) On load change over switch 4 pole 200 Amp 415 Volt type CO2-200 cat part CO22000OOOA of make L&T or its equivalent in Schneider or Siemens.:- 01 Nos (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iv) LED indicating lamps-1 set of 3 (b) Outgoing :-(i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-06 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-01 Nos (iii) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DU250C Cat part No CM90634OOMO of make L&T or its equivalent in Schneider or Siemens :-01 Nos |
| 27 | All as per ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm thick and with following rating. BUSBAR :- 250 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 28 | (a) Incoming :- (i) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DU250C Cat part No CM90634OOMO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iii) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-03 Nos (ii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :-02 Nos (iii) MCCB 100-125 Amp 4 pole, 30 KA with spreader terminal type DU125H Cat part No CM90679OOLO of make L&T or its equivalent in Schneider or Siemens:-01 Nos |
| 29 | All as per ser item no 1 above but Outdoor type LT panel board with sheet thickness 3.15 mm thick and with following rating. BUSBAR :- 700 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 30 | (a) Incoming :- (i) MCCB 320-400 Amp 4 pole, 30 KA with spreader terminal type DU400N Cat part No CM98404OORO of make L&T or its equivalent in Schneider or Siemens:-02 Nos (ii) On load change over switch 4 pole 400 Amp 415 Volt type CO4-400 cat part CO44000OOO of make L&T or its equivalent in Schneider or Siemens.:- 01 Nos (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-03 Nos (iv) LED indicating lamps- set of 3 -03 (b) Outgoing :- (i) MCCB 200-250 Amp 4 pole, 36 KA with spreader terminal Type DU250 Cat part No CM98065OOPO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (ii) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DU250C Cat part No CM90634OOMO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (iii) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:- 05 Nos (iv) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DU250C Cat part No CM90634OOMO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (v) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB :- 01 Nos |
| 31 | All as per ser item no 1 above but with following rating. BUSBAR :- 650 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 32 | (a) Incoming :- (i) MCCB 400-500 Amp 4 pole, 30 KA with spreader terminal type DN3-630D Cat part No CM94106OOS1OG of make L&T or its equivalent in Schneider or Siemens:- 01 Nos (ii) SPD 3 ph, 440 V, 3 P + N, I max-50 KA - 01 no Make L & T cat part no AUSP123PN50D or its equivalent in Schneider or legran :- 01 Nos (iii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iv) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 320- 400 Amp 4 pole, 50 KA with spreader terminal type DU-400N Cat part No CM98404OORO of make L&T or its equivalent in Schneider or Siemens:- 01 Nos (ii) On load change over switch 4 pole 400 Amp 415 Volt type CO4-400 cat part CO44000OOO of make L&T or its equivalent in Schneider or Siemens.:-01 Nos (iii) MCCB 100-125 Amp 4 pole, 18 KA with spreader terminal type DU125D Cat part No CM90677OOLO of make L&T or its equivalent in Schneider or Siemens :- 01 Nos (iv) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:-02 Nos (v) MCCB 125-160 Amp 4 pole, 25 KA with spreader terminal type DU250C Cat part No CM90634OOMO of make L&T or its equivalent in Schneider or Siemens:- 02 Nos (vi) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB:-02 Nos |
| 33 | All as per ser item no 1 above but with following rating. BUSBAR :- 300 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). |
| 34 | (a) Incoming :- (i) MCCB 160-200 Amp 4 pole, 25 KA with spreader terminalType DU 250C Cat part no CM90634OONO of make L&T or its equivalent in Schneider or Siemens:-01 Nos (ii) Multi Function Meter Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider :-01 Nos (iii) LED indicating lamps-1 set of 3 (b) Outgoing :- (i) MCCB 63-80 Amp 4 pole, 18 KA with spreader terminal type DU100D Cat part No CM90518OOJO of make L&T or its equivalent in Schneider or Siemens:- 08 Nos (ii) MCCB 100-125 Amp 4 pole, 30 KA with spreader terminal type DU125H Cat part No CM90679OOLO of make L&T or its equivalent in Schneider or Siemens:- 01 Nos (iii) MCB 40 Amps, 4 Pole, 10 KA, C curve Make L&T or its equivalent in Schneider or ABB:-03 Nos |
| 35 | Supply and fixing of Automatic Mains Failure (AMF) Panel of Capacity 75 KVA padestal mounted, CPRI approved totally enclosed, dust and vermin proof, front side openable, type IP 54 protection made of CRCA steel sheet 2.00 mm thick of size as per IS and having proper locking arrangement in front/back side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables, entire panel shall have a comman Aluminium earth bar of size 25 mm x 5 mm at the rear with 2 Nos earth stud, Solid connections from main bus bar to switchgears/MCCB with required size of Alumunium bus bars and control wiring with min 1.5 sqmm PVC insulated copper conductor cable,, cable gland plates, and comprising with and including following accessories and mounted on angle iron frame of min 50 mm x 50 mm x 6 mm thick and hight minimum 30 cm grouted on PCC 1:3:6 Plat form min 100 mm thick. Complete with the following items housed in :-BUSBAR :- 300 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar |
| 36 | Note: 1) Tthe panel shall be capable to deliver and transfer with full load within a switch over time of 5 to 25 second and suitable for operation on auto/ manual/ test mode etc. as required.(a) Contactor 160 Amp 4 pole:- 02 Nos Model MCX 02 Cat part No CS97020 of make L&T or its equivalent in Schneider or Siemens(b) MCCB 160-200 Amp 4 pole, 25 KA :- 02 Nos Type DU 250C Cat part no CM90634OONO of make L&T or its equivalent in Schneider or Siemens(c) SMPS based Battery Charger for charging battery of rating upto 180 AH.:- 01 Nos(d) Multi Function Meter :- 02 Nos Make L&T Cat No.-WL411010OOOO or Equivalent make i n ABB/ Legrand/Scheneider (e) CT Coil : 02 Set of 3 (f) Phase indicator lamp LED type : 2 Set of 3 (g) Under/ over Voltage relay :- 02 Nos (h) DC Coil Control relay:- 01 Nos (j) Relay 240 V AC/24 V DC MSP 4P :- 03 Nos (k) on/off delay Timer model 800XA :- 02 Nos of make select (l) Push Button : 06 Each Make ABB (m) Misc item and Control Wiring |
| 37 | Supply and fix in replacement Sheet metal enclosure box of size 1.00 mtr x 1.50 mtr wall mounted, CPRI approved totally enclosed, dust and vermin proof fabricated on Angle iron frame of size 50 mm x 50 mm x 6 mm, front side openable, type IP 54 protection made of SS 316 CRCA sheet 2.00 mm thick and having proper locking arrangement in front door suitable for housing TPN DB and energy meter etc..complete all as specified and as directed. |
| 38 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised earth strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5, connected to earthing test point all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 40 mm dia GI light grade pipe for earth lead protection, 20mm dia GI light grade pipe for watering , water funnel, testing point etc, complete all as specified and directed and testing on completion. |
| 39 | M&L for Earthing complete with Solid Copper Rod of dia 16 mm and length 3.00 mtr buried directly in ground ( earth pit not less than 3.00 Metre deep below the Ground Level ) with Top Edge of Earthing rod not less than 2.90 Metre deep below normal ground level , connected to Copper strip 32x6mm dia by means of Bolts, Nuts, Check Nuts and Washers made of copper, 40 mm dia GI Pipe light grade for protection of earthing strip, including filling the pit with 25 kg advanced special Conductolite based BFC compound and necessary earth work in any type of soil , High density PVC Earth pit Cover. Complete including testing on completion complete all as specified and as directed. |
| 40 | Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removel of debris/demolished materials to a distance exc 50m and n.exc 250 m complete all as specified and directed. |
| 41 | M&L for 100mm thick plain cement concrete type B-2, 1:4:8 (using 40mm graded aggregate) as in floor complete all as specified and directed. |
| 42 | M&L for Chequered cement concrete tile 30cm x 30cm x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 15mm thick in CM 1 : 6, complete all as specified and directed.. |
| 43 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
