|
| 1 | Dismantling old unserviceable fencing wire mesh, any type and in any position all as specified and directed. |
| 2 | Dismantling of post or struts (steel/wooden/RCC) any section , including taking out post embeded in concrete and making good distrubed ground all as specified and directed. |
| 3 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified . |
| 4 | Demolition of Cement Concrete reinforced) of any description and in any position not otherwise specifically provided for including removing the rubbish off the premishes all as specified and as directed |
| 5 | Dismantling of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings as directed (each line wire to be measured) |
| 6 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified. |
| 7 | M/L for old size brick work with sub class 'B' bricks straight or curved on plan built in CM 1:6 all as specified and directed . |
| 8 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L 15mm thick cement plaster on fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete. |
| 10 | M&L 15mm thick cement plaster on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete. |
| 11 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 12 | S&F mild steel work for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. including all necessary drilling bolting or riveting and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 13 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 14 | S&F Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 200 GSM/Sqmm. Zine Coating on wire: Minimum 275 GSM/Sqmm (IS 6745-1972 reaffirmed 2006). Tensile Strength of wire: 1400-1500 N/Sq.mm. Weight: 6-8 kg (+ 5%). Number of Loops: 56. Blade Length: 22 mm. Barb Profile: Medium Blade (MBBT). Distance Between Barb: 35 mm. Stretchable length: 10-12 mtrs, Type of clip: Hardened Steelin Galvanized steel. all as speciified and directed by Engr-in- Charge. |
| 15 | M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified. |
| 16 | Use and waste of formwork to sides of concrete floor or roof beams or bands etc plinth beam and similar work fair finished surface complete all as directed. |
| 17 | M&L for Reinforced cement concrete (nominal mix) Type B1 (1:2:4) with 20mm graded stone aggregate as footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete , footings all as specified and directed by Eng-In-Charge |
| 18 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 19 | M&L for TMT bars 6 to 8mm dia bars , as in stirrups, specers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 20 | Material & Labour for complete removal existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 21 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 Please Enable Macros to View BoQ information |
