|
| 1 | Excavation in foundation in ordinary soil loam clay or sand including lift upto 1.5 m. (5fts) and lead upto 30 m. (100 fts)& including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of foundation trenches |
| 2 | Earthwork in embankment mechanially compacted upto 95% proctor density including cartage of earth upto 3.0 Km. (PWD Sch No. 253b+Cartage) |
| 3 | Providing & Laying in Cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast with 40 mm. (nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work. And curing complete also including cost of formwork in foundation and floor. |
| 4 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Foundation/Column excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work |
| 5 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in PLINTH /SLAB BEAM excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work |
| 6 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:2:4 in Slab excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work |
| 7 | Mild steel or iron - Fe-500D or more in plain work such as reinforced concrete or reinforced brick work as neccesary including bending for proper completion of the work and including supply of steel |
| 8 | Brick work with 1:4 cement and coarse sand mortor in Super structure (PWD Sch No. 305a+309) |
| 9 | 12mm thk plaster with 1:4 cement & coarse sand mortor. |
| 10 | Finishing walls with two coat of acrylic smooth exterior paints of best quality including supply of all materials, labours, T&P etc all complete. |
| 11 | Providing and applying white cement based putty of average thickness 1mm , of approved brand and manufacturer, over the plastered wall surface to prepare even and smooth complet. |
| 12 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover (DSR 10.6.1) |
| 13 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, of 60 mm. thickness Please Enable Macros to View BoQ information |
