|
| 1 | Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 2 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed. |
| 3 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand' complete all as specified and as directed. |
| 4 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed or bedding layer of cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises, complete all as specified and as directed. |
| 5 | M&L for chequered ceramic tiles, coloured 10 to 12mm thick (Square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm confirming to IS 4451-2007, in floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and including 15mm thic screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed, complete all as specified and as directed. |
| 6 | M&L for ceramic exterior wall tiles, 7.5 - 9 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, conforming to IS 15622,on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises, complete all as specified and as directed. |
| 7 | M&L for 75 mm thick plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in sub base, complete all as specified and as directed. |
| 8 | M&L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded stone aggregate) as in floor, sub-base, plinth, complete all as specified & as directed. |
| 9 | M&L for 40 mm thick cement concrete Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finishing cement concrete surface without using extra cement, complete all as specified & as directed. |
| 10 | M&L for 100 mm thick cement concrete Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finishing cement concrete surface without using extra cement, complete all as specified & as directed. |
| 11 | M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work, complete all as specified and as directed. |
| 12 | Removing silt from the surface channels/drains and removing from the site, complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in surface channels and drain, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing dressed stonework and precast concrete surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for Bricks, sub class B,(using old size bricks) brick laid on edge of drain bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3), complete all as specified and as directed. |
| 17 | M&L for Bricks, sub class B,(using old size bricks) laid flat, in to sides of drain bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3), complete all as specified and as directed. |
| 18 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4, complete all as specified and as directed. |
| 19 | Taking down cement plaster on brick walls, built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without extra cement, complete all as specified and as directed. |
| 21 | M&L for applying two coats of cement base paint on newly plastered surfaces of wall over a coat of primer, complete all as specified and as directed. |
| 22 | Demolition of reinforced cement Concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided fo, complete all as specified and as directed. |
| 23 | M&L for pre cast RCC slab of type B1 1:2:4 ( Using 20 mm graded stone aggregate) as in cover slab of drain supported on walls, complete all as specified and as directed. |
| 24 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and as directed. |
| 25 | M&L for PCC type C2 1:3:6 (40mm graded stone aggregate) as in Concrete bed (150 mm thick) to 600 mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested, complete all as specified and as directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
