|
| 1 | Dismantlling and removing old tiled cladding from walls including raking out the joints 12mm deep etc. |
| 2 | Dismantlling and removing old tiled flooring including removing the base coarse and stacking the useful materials for re-use and removing the debries within 50mtr lead |
| 3 | Removing old grading plaster from roof slab cleaning the surface, lowering and removing the debries within 50mtr lead |
| 4 | Scraping old paint with scrapers, sand papaering and washing with sap water or soda including scaffolding charges up to 5mtr |
| 5 | Fixing ceramic glazed tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of EIC. |
| 6 | Fixing of vetrified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of vetrifid tiles etc complete as per the direction of EIC. |
| 7 | Supplying ,fitting and fixing of Openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 8 | Supplying ,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 9 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.) |
| 10 | Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base plates made out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete. |
| 11 | Earth work Excavation in all kinds of soil within intial lead and lift including rough dressing and levelling the ground etc. complete. |
| 12 | Filling sand in foundation well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge. |
| 13 | PCC in prop. (1:4:8) in foundation and bed using 4 cm size h.g C.B metal of approved quality and approved quarry including hoisting, lowering, laying concrete and compacting the same to required level, with compaction, watering and curing including cost, conveyance, royalties and taxes of all materials with cost of all labours, sundries and T & p such as hire charges of concrete mixer, concrete vibrator required for the work etc complete as per the specification and direction of EI-C |
| 14 | Fly Ash Brick masonry in C.M. (1:4) in founadtion & plinth and super structure having crushing strength not less than 75 Kg / cm2 with dimensional tolerance ± 2%. |
| 15 | First class Fly Ash brick work in cement mortar (1:6) Superstructure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 16 | C.C. work of M25 grade with 20 mm down grade chips (C.B.) including centring & shurtering for RCC work only |
| 17 | R.C.C. work of M25 grade with 20 mm down grade chips (C.B.) including centring & shurtering for RCC work only (Data for 15 cum)FOUNDATIONS |
| 18 | Column & Beam |
| 19 | Plinth |
| 20 | Lintel |
| 21 | Roof Slab |
| 22 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge. |
| 23 | Providing 6 mm thick cement plaster in CM (1:4) with neat cement punning over RCC surface finished smooth to the walls, watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 24 | 12mm thick cement plaster (1:6) over brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm. |
| 25 | 16mm thick cement plaster (1:6) over brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm. |
| 26 | Cement washing 2coats over plastered surrface including all cost conveyance taxes and as per the direction of EIC etc complete |
| 27 | C:C: (1:2:4) using 12 mm. size H.G. stone chips including the cost of all materials labour T&P sundries etc complete. Completei n all respect asper direction of engineer-in -Charges. |
| 28 | 4 cm thick grading concrete (1:2:4) on roof slab using 12mm & down graded black granite chips. |
| 29 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete. |
| 30 | Painting two coats with weather seal coat over a coat of water bound wall primer including cost of all materials,labour,T & P sundries etc complete as per direction of Engineer- in-charge. |
| 31 | Providing supplying MS grill made of MS angle, square bar and flat including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 32 | Painting two coat enamel paint over a coat of primer on new iron work with cost of primer and paint including all cost, taxes , labour T & P etc. complete. |
| 33 | Fitting Fixing of ACP board including all cost, taxes , labour T & P etc. complete. |
| 34 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge.10 ltrs. Capacity P.V.C. Low level cistern with 32mm dia. PVC Long flush bend (Parryware slim line). |
| 35 | 23\\" long EWC with P' trap including PVC Seat cover (Nycer / Parryware) |
| 36 | 15mm dia. C.P. Angle stop cock.(Amber Delux) |
| 37 | 15mm dia. C.P. short body bib cock.(Amber Delux) |
| 38 | CP Soap holder |
| 39 | 15mm dia C.P. extension piece and flange |
| 40 | 125mm dia CP grating |
| 41 | 15 mm CP 2 in 1 Angle stop cock (Prayag). |
| 42 | 15mm dia CP Brass long body Bib Cock |
| 43 | CP Towel rail |
| 44 | Cutting grooves in brick masonry wall / pucca floor for taking G.I. pipes and making good to the damages etc. all complete as per direction of Engineer-in-charge. |
| 45 | Supplying all materials,labour and T&P for cutting holes through existing flyash brick walls for taking G.I/PVC pipes and fittings including mending good to the damages all complete250mm.to 375mm. thick wall |
| 46 | Supplying all materials, labour, T&P conveyances, fitting and fixing the following nominal bore G.I. / P.V.C. Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge25mm dia. ASTM UPVC pipe (Sch-80) |
| 47 | 15mm dia ASTM UPVC Pipe (Sch-80) |
| 48 | Supply all materials, labour, T&P and laying of following dia. SWR pipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge.110mm dia P.V.C. SWR S/S Pipe (ISI type-B) |
| 49 | 110mm dia PVC SWR door bend |
| 50 | 110mm dia. PVC SWR S/J with Door |
| 51 | 110mm dia. PVC SWR Nahani Trap |
| 52 | 110mm dia. PVC SWR Plain Bend |
| 53 | 110mm dia. PVC SWR Pipe clip |
| 54 | 110mm dia. PVC SWR Cowl |
| 55 | 110mm dia. PVC SWR off set bend |
| 56 | Supplying all materials, labour, T&P for fitting and fixing of 1000Ltrs capacity Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 over head water storage tank of Sintex make with tank cover including lock and key arrangement etc. all complete as per direction of Engineer-in-charge.1000 Ltrs capacity PVC moulded Sintex tank (ISI) |
| 57 | Supplying all materials, labour, T & P and construction of new inspection chamber with flyash brick in C.M. (1:6) providing 12mm thick C.P (1:4) including punning inside and outside fixing of 80mm thick RCC cover slab etc. all complete as per P.H. specification and direction of Engineer-in-charge.New construction of Inspection Chamber (0.90x0.80 x0.75)m with RCC cover slab Please Enable Macros to View BoQ information |
