|
| 1 | Earth work excavation in Hard soil using one cum Bucket Hydraulic Excavator with all leads and lifts and transpotation of ecavated matiral by mechcanical means. and direction of Engg -in- charge |
| 2 | Supply and filling in foundation and plinth with river sand, in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the direction of E-I-C |
| 3 | Cement concrete in prop. (1:3:6) in foundation using 4 cm size CBHG metal of quality from approved quarry washed and cleaned including hoisting, lowering, laying concrete, ramming, watering, curing etc lincluding cost, conveyance, royalties and taxes of all materials, with cost of all labours, sundries and T & P such as concrete mixer, concrete vibrator required for the work etc, complete as per specificationand direction of EIC |
| 4 | R.C.C. work of M20 grade with 20 mm down graded chips (C.B.) including hoisting & laying concrete including centering and shuttering with well watering and curing etc complete. (Column Base footing) |
| 5 | Column in Superstructure |
| 6 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. |
| 7 | Supplying fitting and fixing of MS Grills over compound wall made up MS flat and angle with priming including all cost of materials, all labour, T&P etc complete as per direction of EIC. |
| 8 | Supplying all material, labour, T&P for enamel Painting two coats with any approved paint on iron work of approved shade and quality etc complete. |
| 9 | Construction, providing, Supplying and Precast RCC/SFRC fencing compound wall poles having finished dimension of 200mmX200mmX3000mm (long) made of M-30 grade concrete with 10 nos of 4mm dia HTPC (High Tension pre coated) wire, fixed in cast-in-situ PCC M-20 concrete in foundation Footing of size 600 mm dia 300mm deoth from top and P.C.C of proportion in cc (1:4:8) of size 600 mm dia 300 mm depth at bottom in side the RCC collar pipe of 600 mm internal dia placed over a base of Plane cement concrete of Propotion with C.C (1:4:8) of size 680 mm dia 100 mm depth including excavating foundation pit for each pole in Slusy Soil of size 680 mm dia 700mm depth including providing Cast-in-situ P.C.C of Propotion in C.C (1:4:8) of Size 1520 mm length,150 mm Width & 100mm depth below slab panel including wtering & Curing for required days, alowing with supplying , fixing be fitting precast RCC / SFRC slab having dimension of 2100mm (long) x 300mm (wide)x50mm (thick) made with M-30 grade concrete having 4mm dia GI wire 3 nos. convering the top of the compound wall poles with a Precast RCC/ SFRC cover of (300x300x150) mm in order to prevent the slab pannels from removing. All complete as a set to be measured in team of running meter including such precast RCC/ SFRC top cover, slab, pole, including painting two coats of approved cement paint over a coat of cement wash including curing cost and conveyance of all materials, royalities, takes all labour, labour cess, T & P required for the work etc complete including dewatering if required as per the direction of the Engineer-in-charge execluding cost of GST. |
| 10 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mm thick C.C. Paver Blocks of M-40 grade With approved colour design Pattern etc. complete. |
| 11 | RCC M-25 with 20mm size downgraded CBHG chips including all cost, conveyance, royalty and taxes etc. complete of all materials to work site as per the specificatiosn approved by the department and the directions of the Engineer-in-Charge |
| 12 | Providing & laying at or near ground level factory made Kerb stone of M-30 Grade Cement concrete in position to the required line,level,curvature,jointed with cement mortar (1:3),including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required etc complete as per direction EIC. |
| 13 | Display Board & Photographs Please Enable Macros to View BoQ information |
