|
| 1 | Provision for erection and removal of tubular scaffolding in three rowsto the height of 15.00Mtr. and for the top portion appro. 6.00 mtr. Hight bamboo, ballies and wooden planks are required Including conveyance of material from Ellora caves to Malikamber tomb and back (Except bamboo, ballies, wooden planks and coir string. These materials will be purchased or hired by contractor. Only Tubular scaffolding materials will be supplied departmentally from Ellora caves store room. Transportation by contractor.) including loading, unloading, transportation of material etc complete as directed. |
| 2 | Breaking and removing the old damaged, cracked stone Sajja on the top of the Malikamber tomb carefully with the help of chisel, Hammer, crow bar and using the chain pully, rope for lifting the removed stone sajja and take down with the help of rope, ladder and throwing the removed debris material from Malikamber Tomb to dumping ground by tractor etc. complet |
| 3 | Providing and layingstone chajjas to the Top portion of outer wall ofMalikamber Tomb wherever existing chajjasbroken and damaged, replace with newbasaltic stone of size 1.55 x 0.30x 0.20 mtr; 1.55x 0.45x 0.20 Mtr; and 1.55 x 0.60x 0.20 Mtr. Thick in lime mortar 1:1:1 asper matching with existing shape, size and design, overlapping the stones with necessary fittings in SS Clamps, dowel pin and nails, filing(pouring) Lead etc. . By using the chain pully, rope for lifting the stone block complete asdirected. South west Corner |
| 4 | Providing dutchman repair work of damaged, broken Sajjasto the Top portion of outer wall ofMalikamber Tomb wherever existing chajjasbroken and damaged, replace with newbasaltic stone of size 0.50 x0.45x 0.20 mtr. Thick, 0.30 x 0.45x 0.20 mtr. Thick after cutting the old damaged Chajjasasper matching with existing shape, size and design, overlapping the stones with necessary fittings in SS Clamps, dowel pin and nails, filing (pouring)molten Lead etc. Byusing the chain pully, rope for lifting the stone block complete as directed |
| 5 | Repairs to Minarets Replacing thedamaged/ missing stone Brackets of size 0.50 x 0.50 x 0.22 mtr. of all four corner of Minarets below Sajja as per original, including dressing, curving lifting the stone by chain pully, fixing in lime mortar 1:1 asper matching with existing shape andsize with necessary fittings in SS Dowels, clamp patti, nails, araldite, with filling molten lead etc.complete as directed. |
| 6 | Replacing the damaged/ missing stone cushion slab of size 0.50 Mtr .x 0.05 + 0.07 x 0.40 Mtr. 2 of all four corner of Minarets in between Bracket and sajja as per original, including dressing, curving lifting the stone by chain pully, fixing in lime mortar 1:1 asper matching with existing shape andsize with necessary fittings in SS Dowels, clamp patti, nails, araldite, with filling molten lead etc.complete as directed |
| 7 | Replacing the damaged/ missing stone Saja’s of size 0.33+0.57 x 0.20+0.17 x 0.90 mtr; 0.25+0.50 x 0.20+0.17 x 0.90 mtr; And other actual missing stone dimension as per site condition for all four corner of Minarets above brackets as per original, including dressing, curving lifting the stone by chain pully, fixing in lime mortar 1:1 asper matching with existing shape andsize with necessary fittings in SS Dowels, clamp patti, nails, araldite, with filling molten lead etc.complete as directed. |
| 8 | Replacing the damaged/ missing corner and Center stone over sajja of size 0.30x 0,.55 x 0.43 mtr, and 0.40 x 0.55 x 0.43 mtr. of all four corner of Minarets as per original, including dressing, curving lifting the stone by chain pully, fixing in lime mortar 1:1 asper matching with existing shape andsize with necessary fittings in SS Dowels, clamp Patti, nails, araldite, with filling molten lead etc.complete as directed |
| 9 | Replacing the damaged/ missing stone turrets of Size 0.20 x0.20 0.50 Mtr. near top dome of all four corner of Minarets as per original, including dressing, curving lifting the stone by chain pully, asper matching with existing shape andsize etc.complete as directed. |
| 10 | Providing and applying15 mm thick lime plaster over the stone lotus petal surface to maintain the level surfacein existing ancient stone andpreparing as a base coat for plain plaster including making of grooves,moldings, offsets, corners, archesetc. as per matching with original,where ever necessary in lime surkhimortar 1:2 (1 Lime, 1 Sand, 1 BrickSurkhi) with organic adhesive well grinded by lime grinder machine andsurface to be prepared roughed toserve as a key to hold the next coatand allowed 15 days curing etc.complete as directed |
| 11 | Providing and applying 30 mm thick plain lime plaster over newly applied base coat as per existing pattern including making of groove, moldings, offsets etc. as per matching with original where everplain area of the outerdome in lime Surkhi Mortar 1:0.5:1 (1 Lime, 0.5 Surkhi:1 Sand) with organic adhesive well grinded by lime grinding machine and allowed 15 days curingetc. complete as directed. |
| 12 | Repairs to the existing old , damaged graves in the premises of Malikamber Tomb by using CR Stone of sizes 0.60 x 0.40x 0.30 mtr; 0.45x 0.40x 0.30; 0.60x 0.30x 0.40 mtr; 0.45 0.25x 0.35 mtr; 0.30x 0.25 x 0.35 mtr, and as per site conditionfor cladding the dislodged graves where ever missing in Lime mortar 1:1:1 including curing etc complete |
| 13 | Providing recess pointing on Brick/ stone masonry of exposed portion using lime, Surkhi mortar 1:2 mix, including racking out joints, curing etc. complete as directed by in charge of work. |
| 14 | Providing and Constructing UCR stone masonry wall in Cement mortar 1:5 using hard trap stones obtained from approved quarry,including racking out joints, curing etc complete |
| 15 | Providing & fabricating M.S. spiked grill of size 2.50m width by using 24 Nos. 100mm C/c of 16mm square bars of 0.80 m height welded with M.S. ISA 50×50×6mm angle iron at two sides of vertical and bottom, 2 Nos. .M.S. Channel 100x50x6mm as vertical post and jointing/welding, each M.S. Channel as shown in the drawing including cutting welding grinding diamond cut for fixing square bars for inserting in to 2 Nos. of M.S. flat of size 50 x 6mm at top & middle with necessary fixing arrangement at both sides of grill, painting in two coats over and anticorrosive paint etc. complete as directed by in charge of work |
| 16 | Providing and fixing the best quality teak wood Door frame and shutter of opening Size 1.80 mtr. X 1.05 mtr. and section of frame 0.100 x 0.075 mtr. with double leaf shutter of size 1.60 x 0.85 mtr. and 30 mm thick With providing top rail, Central Rail, Lock Rail and Bottom rail including fastening, fixing the frame by Nut Bolt and shutter with SS Hinges, Tower bolt, Aldrop, Handles etc. Complete. |
| 17 | Providing and applying best quality teak wood WindowShutter of size 0.78 x 1.10 Mtr. andthickness of the Pannel 0.035 mtr. With fastening, including fixing the shutter by best quality Hinges, tower bolt, Handles, and Painting etc. Complete |
| 18 | Minor Repairing and refixing the removed old Shutters to the existing old wooden Door frame by using best quality Hinges, tower bolt, Aldrop, Handle, Painting etc Complete, Please Enable Macros to View BoQ information |
