|
| 1 | Providing and applying two or more coats of approved weather resistant epoxy paint of required shade and finish to the existing MS grill fencing all around the Shore Temple premises, after thoroughly scraping and removing the existing damaged/peeling paint, rust, scales, dust and other foreign materials by manual/mechanical means, including surface cleaning, wire brushing, sand papering and preparation of surface; applying one coat of approved zinc-rich anti-corrosive metal primer and necessary PU paint/base coat over the prepared surface; including touch-up treatment to welded joints and corroded portions, scaffolding, staging, ladders, curing wherever required, including cost of all materials, consumables, T&P, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, safety arrangements and cleaning the site after completion of work, complete in all respects as directed by the Engineer-in-Charge. |
| 2 | Providing, supplying and fixing of 100 watts integrated type solar LED security light mounted on 4.5 metre height 50 mm dia medium class G.I. pipe of approved make and specification, complete with inbuilt solar PV panel, lithium battery, LED luminaire, charge controller and all integrated accessories in a single unit, including cost of 50 mm dia medium class G.I. pipe, pole clamp, mounting arrangements, foundation bolts, necessary fittings, fixtures, wiring connections and allied accessories; including erection of G.I. pipe, testing and commissioning of the complete system, including cost of all materials, consumables, T&P, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 3 | Providing, supplying and fixing of approved make LED bollard light fitting suitable for outdoor/pathway lighting arrangements, complete with LED luminaire, bollard housing, mounting base, necessary clamps, anchor fasteners, accessories, fittings and fixtures, including necessary wiring, cable connections, PVC conduit wherever required, earthing arrangements, testing and commissioning of the complete lighting system; including cost of all materials, consumables, T&P, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 4 | Fixing and erection of integrated type 100 watts solar LED security light mounted on 4.5 metre height 50 mm dia medium class G.I. pipe, including necessary earthwork excavation for foundation, providing and laying Plain Cement Concrete in proportion 1:5:10 using approved size hard broken stone jelly for foundation bed, embedding and fixing the G.I. pipe in proper line and level, curing, refilling the sides with excavated earth, ramming, disposal of surplus earth, and making good the site after completion; including all necessary fittings, foundation hardware, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 5 | Dismantling of existing dressed stone work, ashlar face stone work, marble work and precast concrete work for construction of ramp, by manual/mechanical means, including careful removal without causing damage to adjoining structures, stacking of serviceable materials as directed, disposal of unserviceable materials and debris within 50 metres lead, including loading, unloading, conveyance, all labour charges, tools and plants, safety arrangements, cleaning of the site after completion, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 6 | Excavation work by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains not exceeding 1.5 metre in width or 10 sqm on plan, including dressing of sides, levelling and ramming of bottoms, lift up to 1.5 metre, getting out excavated soil, shoring wherever necessary, and disposal of surplus excavated earth within a lead of 50 metres as directed; including cost of all machinery, tools and plants, conveyance, loading and unloading charges, all labour charges, safety arrangements, site clearance, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 7 | Providing and laying Cement Concrete in proportion 1:4:8 (One Cement : Four Sand : Eight hard broken granite stone jelly) using approved quality 40 mm gauge hard broken granite stone jelly for foundation works, including mixing with approved quality cement and sand, laying in layers not exceeding 4.5cm thickness, watering, ramming, compacting, consolidating and finishing to proper line and level; including dewatering wherever necessary, curing, centering to edges wherever required, and preparation of bed complete in accordance with standard specifications; including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 8 | Providing and constructing coursed rubble masonry (first sort) with approved quality hard stone in foundation and plinth, laid in cement mortar of approved proportion, including dressing of stones, properly laying in courses, filling joints, packing with spalls, curing, scaffolding, centering wherever required, and finishing true to line, level and plumb complete in accordance with standard specifications; including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge and departmental officers. |
| 9 | Providing and laying polished granite stone flooring of approved colour, shade, design and pattern in linear as well as curvilinear portions, using 18 mm thick machine-cut and polished granite stone slabs laid over 20 mm average thick cement mortar bed in proportion 1:4 (One Cement : Four Coarse Sand), including cutting, dressing, edge finishing, laying to proper line, level and slope as per approved architectural drawings; jointing with cement slurry, pointing with white cement slurry mixed with matching colour pigment, rubbing, machine polishing, buffing, curing and finishing the surface smooth and even complete; including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, wastage, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 10 | Providing and carrying out pointing on stone masonry work with cement mortar in proportion 1:3 (One Cement : Three Fine Sand), including raking out the joints, cleaning the surface thoroughly, watering, filling and finishing the joints neatly to the required profile, curing and finishing complete in accordance with standard specifications; including cost of all materials, consumables, tools and plants, scaffolding wherever necessary, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the departmental officers and the Engineer-in-Charge. |
| 11 | Providing, fabricating and fixing hand rail of approved size and section to steel ladder railings, balcony railings, staircase railings and similar locations, including cutting, bending, welding, grinding, smoothing joints and fixing in proper line and level with necessary brackets, cleats, screws, fasteners and accessories; applying one coat of approved anti-corrosive steel primer to all exposed steel surfaces after fabrication and before fixing, including scaffolding wherever necessary, touch-up painting to welded portions, conveyance, loading and unloading charges, cost of all materials, consumables, tools and plants, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 12 | Providing and laying tactile tiles for visually impaired persons conforming to relevant accessibility standards, of size 300 x 300 x 9.8 mm with water absorption less than 0.5% and conforming to IS:15622, of approved make, colour and shade, for outdoor flooring areas such as footpaths, courtyards, pathways and other public access locations, laid over 20 mm thick cement mortar bed in proportion 1:4 (One Cement : Four Coarse Sand), including surface preparation, cutting, dressing, laying in required shape, pattern, alignment and slope; grouting the joints with white cement mixed with matching colour pigments, curing, cleaning and finishing complete; including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Providing, fabricating and fixing stainless steel railing made of Grade 304 stainless steel hollow tubes, channels, plates and other required sections, including cutting, bending, welding, grinding, buffing, mirror polishing and making necessary curvature wherever required; fixing the railing in proper line, level and alignment on top of floor or at the side of waist slab with suitable arrangements using stainless steel dash fasteners, stainless steel nuts, bolts, brackets and other approved accessories of required size; including drilling holes, anchoring, finishing welded joints, scaffolding wherever necessary, conveyance, loading and unloading charges, cost of all materials, consumables, tools and plants, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as approved and directed by the Engineer-in-Charge. (For payment purpose, only the weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, clamps etc.). |
| 14 | Boring/drilling bore well of required diameter for casing/strainer pipe up to 90 metre depth below ground level by suitable rotary/percussion drilling method conforming to IS: 2800 (Part-I), including collection of soil and rock samples from different strata, preparation and submission of strata chart/bore log, lowering and withdrawal of drilling tools, flushing and cleaning of bore, and carrying out the work with all necessary precautions complete; including hire and running charges of drilling rigs, compressors, pumps, tools, plants, machineries and accessories required for execution of the work, conveyance, loading and unloading charges, all labour charges, water charges wherever required, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 15 | Providing, supplying, erecting, testing and commissioning of 500 litres capacity Industrial Model Reverse Osmosis Water-cum-Purifier system of approved make to deliver potable drinking water conforming to World Health Organisation (WHO) standards, complete with pre-filtration unit, RO membranes, storage tank, pumps, UV/UF purification system wherever required, control panel, inlet and outlet connections, valves, piping arrangements, necessary electrical connections, supporting frame and all allied accessories; including installation in proper position, trial run, testing and commissioning of the complete system, including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 16 | Purchase and supply of Furniture and fixtures for Baby care room including installation and fitting charges etc. 1) Providing and placing nursing chair for baby care room, made of sturdy wooden / powder-coated MS frame with comfortable cushioned seat and backrest, upholstered with washable, durable fabric / synthetic leather of approved quality. The chair shall be provided with arm rests, proper back support, stable legs, and smooth finished edges, ensuring comfort and safety for nursing mothers. The item shall be suitable for indoor public use and complete in all respects, as directed by the Engineer-in-Charge. |
| 17 | 2) Providing and placing pedestal fan of 400 mm sweep (16 inch), of approved make, suitable for indoor use in baby care room. The fan shall have adjustable height, oscillating mechanism, and multiple speed control, with sturdy base for stable operation. It shall be fitted with protective guard, energy-efficient motor, and operate on single-phase 230 V AC supply, complete with power cord, plug top, testing and commissioning, as directed by the Engineer-in-Charge. |
| 18 | 3) Providing, supplying, installing, testing and commissioning of 1 Ton Split Air Conditioner of approved make such as Voltas / Lloyd / Blue Star / Carrier or equivalent, complete with indoor and outdoor units, copper refrigerant piping with insulation, drain piping, electrical interconnections, suitable wall mounting brackets / stands, vibration pads, and all accessories, conforming to relevant BIS/ISI standards, including one year comprehensive warranty and five years warranty on compressor, complete as per manufacturer’s specifications, site requirements and direction of Engineer-in-Charge. |
| 19 | 4) Providing and placing baby cradle suitable for infant care room, made of good quality seasoned wood / powder-coated mild steel / high-grade plastic (as specified) with smooth finished edges, sturdy frame and stable base, complete with comfortable washable mattress, side safety rails, gentle rocking mechanism or fixed type, and mosquito net arrangement, ensuring complete safety and comfort for infants. The cradle shall be easy to clean, non-toxic, child-safe, durable, and suitable for use in public facilities, complete in all respects and as directed by the Engineer-in-Charge. |
| 20 | 5) Providing and placing a compact utility table for baby care room, made of engineered wood / pre-laminated particle board / MDF of approved quality, with smooth laminated finish, rounded edges for safety, and sturdy support with wooden or powder-coated MS legs. The table shall be suitable for placing baby care items, easy to clean, stable, and safe for indoor use, complete in all respects and as directed by the Engineer-in-Charge. |
| 21 | 6) Providing and fixing wall scenery in baby care room, consisting of child-friendly themed wall artwork / vinyl wall stickers / decorative wall decals / mural painting, depicting pleasant and soothing designs such as nature, animals, cartoons or educational themes, made of non-toxic, eco-friendly and washable materials, suitable for indoor use. The work shall include surface cleaning, proper fixing/alignment, and finishing complete, as approved by the Engineer-in-Charge. |
| 22 | 7) Providing and fixing blackout curtain of 7 ft height, made of good quality heavy-duty blackout fabric with minimum 90–100% light blocking capacity, suitable for baby care room / indoor use. The curtain shall be of approved colour and design, with stitched edges, rust-proof eyelets / hooks, complete with curtain rod or track (if specified), including all fittings, fixing accessories, and proper installation, complete as per site requirement and direction of the Engineer-in-Charge. |
| 23 | 8) Providing and placing 7 litre capacity dust bin with pedal operation, made of good quality durable plastic / stainless steel (as specified), fitted with foot-operated pedal mechanism for hands-free use and tight-fitting lid to control odour and maintain hygiene. The dust bin shall be easy to clean, rust-free, sturdy and suitable for indoor use, complete in all respects and as directed by the Engineer-in-Charge. |
| 24 | 9) Providing and fixing ceiling-mounted LED light fixture of size approximately 300 mm dia (round) / 300 × 300 mm (square), with 12 Watt LED lamp, suitable for indoor use in baby care room, providing soft and uniform illumination. The luminaire shall be surface-mounted / flush-mounted, glare-free, energy efficient, with durable housing and opal diffuser, complete with all mounting accessories, internal wiring connection, testing and commissioning, complete as per direction of Engineer-in-Charge. |
| 25 | 10) Providing and placing diaper disposal bin for baby care room, made of good quality durable plastic, with tight-fitting lid and odour-control design, suitable for hygienic disposal of used diapers. The bin shall be easy to operate (manual / pedal type), easy to clean, compact in size, stable, and suitable for indoor use in public facilities, complete in all respects and as directed by the Engineer-in-Charge. |
| 26 | 11) Providing and fixing wall clock of approved quality, round/square in shape, made of durable plastic body with clear dial, bold numerals and glass/acrylic cover, suitable for indoor use. The clock shall be battery-operated quartz movement, preferably silent sweep type, accurate in timekeeping, easy to read from a distance, complete with battery and all fixing accessories, and fixed at appropriate height, as directed by the Engineer-in-Charge. |
| 27 | 12) Providing and fixing wall-mounted mirror of size 450 mm × 600 mm, made of good quality float glass mirror of minimum 5 mm thickness, with smooth polished edges and protective backing, fixed to the wall with suitable non-rusting clamps / concealed fittings / adhesive. The mirror shall be safe, durable, easy to clean, and suitable for indoor use in a baby care room, complete in all respects and as directed by the Engineer-in-Charge. |
| 28 | 13) Providing and placing one number child-friendly toy for baby care room, made of non-toxic, child-safe plastic / soft material, suitable for toddlers and infants. The toy shall have smooth rounded edges, bright and pleasant colours, be washable and durable, and free from sharp parts or choking hazards. The item shall be suitable for indoor public use and complete in all respects, as approved by the Engineer-in-Charge. |
| 29 | 14) Providing and fixing one number First Aid Box for baby care room, made of durable plastic / metal body, wall-mounted or portable type, with clearly marked first aid symbol and secure lid. The box shall be adequately stocked with basic first aid items suitable for infants and adults, such as sterile cotton, gauze pads, bandages, adhesive plasters, antiseptic solution/ointment, disposable gloves, scissors, thermometer, and other essential contents. The first aid box shall be easy to access, hygienic, refillable, and complete in all respects, as directed by the Engineer-in-Charge. |
| 30 | UPVC Window Specification: Supplying and fixing UPVC (Unplasticized Polyvinyl Chloride) Windows of casement type (Open) from the profile the size of Outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it Operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lokable action security protetive hinges strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frame. The window should be got approved from the Executive Engineer before use on work including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 31 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. this including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 32 | ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. This including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 33 | Centering and shuttering for modification of Baby Care room and cloak rom,including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 34 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and M edium Tensile steel bars From Item No.12 RCC 1 : 1½ : 3 including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 35 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 36 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 37 | Special ceiling plastering and finishing all the RCC exposed surfaces such as RCC Slabs sunshade, canopy, staircase steps, landing slab etc., with cement mortar 1:3 [One cement and three M-sand] 10mm thick including hacking the surface and providing cement mortar noising beading wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specifications. including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 38 | Painting two coats of newly plastered ceiling surface with White washing with lime to give an even shade, etc, complete. including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 39 | Plastering with Cement Mortar 1:5, 20 mm thick in all wall including curing etc. complete complying with standard specification including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 40 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 42 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 43 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat etc. complete including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 44 | Providing Plumbing work with necessary fittings including cost of labour charges and conveyance charges complete etc.(i) Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works). This including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 45 | Providing Plumbing work (ii) Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 46 | Providing Plumbing work (iii) Supplying and fixing of 1000 litres capacity PVC water tank with IS specification IS 10701/96 the tank is meant for outdoor (or)indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and etc. (The water tank should be got approved by the EE before use on work. this work including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 47 | Providing Plumbing work (iv) Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 48 | Supplying of electrical and electronic items and supply of electrical fittings including cost of labour charges and conveyance charges (i) Wiring with 2x1.5sq.mm. PVC insulated unsheathed FRL SSC copper conductor rof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5AFT switch inflush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 49 | Supplying of electrical and electronic items(ii) Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Unconducted of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm Metal switch box with suitable top cover for 5A 3pin non inter locking CS Modular Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 50 | Supplying of electrical and electronic items(iii) Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 51 | Supplying of electrical and electronic items(iv) Wiring with 2x4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade insuitable pipe concelaed with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 52 | Supplying of electrical and electronic items(v) Supply and fixing of fancy glass shade and 11W CFL for BH point including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 53 | Supplying of electrical and electronic items(vi) Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 54 | Supplying of electrical and electronic items(vii) Supply and fixing of 4' 40 W Twin Mirror optic suspension type fitting (Philips / Crompton / Wipro) complete with louvers cover complete with copper choke and condensor with conduit pipe suspension, with PVC unsheathed Copper leads from the terminals to the fittings with flu. tubes including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 55 | Supplying of purchase of electrical and electronic items (viii) Supply & Fixing of AC / DC 76mm Buzzer/call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 56 | Provision for purchase of electrical and electronic items(ix) Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box covered with Hylem sheet in flush with wall with earth connection (For Computer Plug Socket) including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 57 | Provision for purchase of electrical and electronic items(x) Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make] including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 58 | Provision for purchase of electrical and electronic items(xi) Supply and fixing of 63A TPN MC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only. Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1 No. 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 59 | Provision for purchase of electrical and electronic items(xii) Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No. 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 60 | Provision for purchase of electrical and electronic items(xiii) Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 61 | Provision for purchase of electrical and electronic items(xiv) Supply and laying of 31/2 X 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 62 | Provision for purchase of electrical and electronic items(xv) Supply and clamping of 31/2x50 mm PVC ctvg Armoured CABLE ON SUITABLE on post or on wall with MS Clamps including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. |
| 63 | Provision for purchase of electrical and electronic items(xvi) Supply and fixing of 2x36w CFL type street light fitting with complete with 32mm dia G.I. pipe class 'B with 1 No 32mm G.I. Bend complete on the existing post /well with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads, MS clamps and aluminium paiting with 2 Nos 36w CFL. |
| 64 | Provision for purchase of electrical and electronic items(xvii) Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry including cost of all materials, consumables, tools and plants, conveyance, loading and unloading charges, all labour charges, GST and all other applicable taxes, duties and levies, complete in all respects as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
