|
| 1 | Lining in patches of canals in filling section of Guddikheda canal, isharpur distributary and HR construction of galcha minor of sankla distributary |
| 2 | Excavation in all kind of soft/loose//hard/dense soils, moorum & moorum mixed with boulders and mud including dressing, placing the excavated soil neatly in specified dump area or disposing off the same as directed , including cost of site clearance, all materials,machinery, labour and dressing etc. complete with all leads and lifts. |
| 3 | Earthwork for embankment (hearting/ casing) using selected soil from approved borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour and dressing, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/sides (excluding watering and compaction ) |
| 4 | Compaction of earthwork at optimum moisture content to achieve maximum dry density by light roller i.e non powered roiiers or sheep foot roller or hand rammers ( excluding watering) |
| 5 | Watering earthwork for compaction at optimum moisture content. |
| 6 | Excavation in different typesof soil in canal bed and sides slopes for lining, sleepers, steps, coping and under drainage arrangement including dressing to the profile and disposal of excavated materialsetc.complete.In all kind of soft/loose/hard/dense soils , moorum & moorum mixed boulders and mud - with all leads and lifts. |
| 7 | Providing and placing approved cohesive non-swelling soils, below lining in canal bed and side slopes including serration in soil, breaking of clods, laying in layers of 15 cm. thickness, cutting and finishing in required bed grade & side slopes including dressing, watering, compaction (at optimum moisture content to obtained dry density not below 90%) etc.complete with all leads and lifts. (C.N.S. Material ) |
| 8 | Providing and fixing in position LDPE film of 150 micron (0.15 mm)IS mark of grade 231for bed and sides of canal including cost of all materials, labour, laying, joining as per specifications etc. complete with all leads and lifts. |
| 9 | Providing and placing in position cement concrete with graded aggregate in canals, including cost of all material, vibration, finishing, curing for 28days, cleaning etc.complete with lead and all lifts. For sleepers, safety ladders & lining of field channel & water courses using graded aggregate of maximum size 40 mm with.(i) Cement concrete M10. (Nominal Mix) ( For Sleepers ) |
| 10 | Providing and placing in position cement concrete with graded aggregate in canals, ncluding cost of all material, vibration,finishing, curing for 28days, cleaning etc.complete with lead and all lifts. (b) For in-situ lining in canal (in bed and slopes & coping with design mix Concrete) (ii) M-15,20mm graded aggregate |
| 11 | Filling contraction joints(grooves)as per IS: 5256 with hot applied sealing compound IS:13143 including cleaning and washing grooves, painting its inner surfaces with primer IS:3384 at the rate of 1 litre per 4 sqm inclusive of cost of all materials for in-situ concrete lining etc. complete. with lead and all lifts. (a) grooves of 17 mm depth |
| 12 | Construction of Dowels (Dowla) Construction of Dowels, 30 cm wide on top and 30 cm in height (1.5:1 side slopes) on the canal banks including excavation, dressing etc. Complete. |
| 13 | Providing, fabricating and placing in position steel reinforcement bars for Reinforced Cement Concrete / Plain Cement Concrete structures including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints wherever required, tying with 1.25 mm diameter soft annealed steel wire, etc., complete. |
| 14 | Providing and laying M-15 grade Plain Cement Concrete Design Mix using graded aggregate clean, hard for foundation filling and sub structure including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing ,packing joints of shuttering etc. complete. Using graded aggregates of maximum size.20 mm |
| 15 | Providing, Laying and Jointing non- pressure(NP3) RCC socket & spigot pipes with rubber gasket joint/joint caulked with cement mortar 1:2 including testing of joints. (Conforming to IS ; 458-1988, IS 783:1985) etc. complete 600 mm |
| 16 | Providing and laying M-20 grade Reinforced Cement Concrete Design Mix using graded aggregate clean, hard super structure including cost of all materials (excluding cost of providing and placing reinforcement steel/bars ),machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing ,packing joints of shuttering etc. complete. Using graded aggregates of maximum size:- 20mm |
| 17 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc.,applying two coat of zinc rich epoxy primer to give dry film thickness of 70± 5 microns and finish coat(two coats)of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150± 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. Please Enable Macros to View BoQ information |
