|
| 1 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 2 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS: 8783-1978) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 3 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS: 8783-1978) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 4 | Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 5 | Repair and maintenance of submessible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC (IS: 8783-1978) insulated electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 6 | i) 1.0 HP Motor suitable for 1000 GPH capacity submerssible pumpset |
| 7 | ii) 2.0 HP Motor suitable for 2000 GPH capacity submerssible pumpset |
| 8 | iii) 3.0 HP Motor suitable for 2000/2500 GPH capacity submerssible pumpset |
| 9 | Repairing of 2 HP / 3 HP capacity submerssible pump of different make including dismantling the old unserviceable pump and remaking the pump in good condition by providing necessary parts etc. complete as per direction and saticefaction of the engineer in charge. |
| 10 | Provinding and fitting fixing with PVC insulated 3 core flate copper cable conforming to relevant IS code for submersible motor with all necessary equiment ad fitting as required as per specfication and direction of the Engineer - in - charge. i) 4.0 sqmm |
| 11 | ii) 6.0 sqmm |
| 12 | Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (confirming to IS:8034) and reassembling the same including machining and servicing and necessary trial run as per specification and direction of Engineer in charge.i) Bronze/SS Impller |
| 13 | ii) Bronze grade LTB 2 / Cutless rubber bush |
| 14 | iii) Bronze grade LTB 2 / 12% cromium steel grade shaft sleeve |
| 15 | iv) Stainless steel pump shaft |
| 16 | v) SS Impller lock |
| 17 | vi) SS half coupling |
| 18 | vii) Stud bolt & nut |
| 19 | viii) Dismantaling, repairing, reassembling, serviceing |
| 20 | Repair and maintenance of 5000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (confirming to IS:8034) and reassembling the same including machining and servicing and necessary trial run as per specification and direction of Engineer in charge.i) Bronze/SS Impller |
| 21 | ii) Bronze grade LTB 2 / Cutless rubber bush |
| 22 | iii) Stainless steel pump shaft |
| 23 | iv) Cast iron grade (FG-200) suction casting |
| 24 | v) SS Impller lock |
| 25 | vi) SS half coupling |
| 26 | vii) Stud bolt & nut |
| 27 | viii) Dismantaling, repairing, reassembling, serviceing |
| 28 | Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (confirming to IS:8034) and reassembling the same including machining and servicing and necessary trial run as per specification and direction of Engineer in charge.i) Bronze/SS Impller |
| 29 | ii) Stainless steel pump shaft |
| 30 | iii) SS Impller lock |
| 31 | iv) Stud bolt & nut |
| 32 | v) Dismantaling, repairing, reassembling, serviceing Please Enable Macros to View BoQ information |
