|
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed. |
| 3 | Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | Taking down chowkhat n exc 1.5 sqm each without taking off shutter from frame complete all as specified and directed. |
| 5 | Taking down chowkhat exc 1.5 sqm and n exc 4.00 sqm each without taking off shutter from frame complete all as specified and directed. |
| 6 | M& L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 7 | M& L for Glazed ceramiccolour tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 8 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 including moulding and rounding complete all as specified and directed. |
| 9 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 10 | S&F for powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 11 | S & F for powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and directed. |
| 12 | S&F for 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 13 | S&F for 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 14 | M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed. |
| 15 | S&F for 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 16 | S & F for 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed. |
| 17 | M&L for plain cement concrete Type B-0 1:2:4 ( using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster ( while taking down Door/window, ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 18 | S & F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 19 | S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 20 | S&F for 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 21 | S & F for 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 22 | S & F for 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 23 | S&F for 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed. |
| 24 | S & F for Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 25 | S&Ffor MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 26 | S&F for stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 27 | M&L for PCC 1:5:10, type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 28 | M&L for 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. (WPL shall be measured and paid separately) |
| 29 | M&L for Applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed. |
| 30 | Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 31 | M&L for old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc. complete all as specified as directed. |
| 32 | M&L for 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 33 | Material & labour for 5 mm thick cement plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L for 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (WPL shall be measured and paid seperately). |
| 35 | Supply only liquid water proofing compound complete all as specified and directed. |
| 36 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 38 | Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 39 | S&F for 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed. |
| 40 | S&F for 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed. |
| 41 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed. |
| 42 | S&F for 1000 Ltrs capacity rotational moulded polythene water storage tank ISI marks, minimum three layers (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tanks complete all as specified and directed. |
| 43 | S&F for 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 44 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed. |
| 45 | Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 46 | S& F for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed. |
| 47 | S&F for PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed. |
| 48 | S&F for 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 49 | S&F for 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed. |
| 50 | S&F for 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 51 | S&F for 110mm bore PVC vent cowl complete all as specified and directed. |
| 52 | S&F for PVC floor trap 75 mm dia with CP gratings complete all as specified and directed. |
| 53 | S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed. |
| 54 | S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed. |
| 55 | S& F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 56 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed. |
| 57 | S& F in repair for PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed. |
| 58 | S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified and directed. |
| 59 | S&F for waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed. |
| 60 | S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted. |
| 61 | S&F in repairs 600 mmx450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 62 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 63 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 65 | S&F 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed. |
| 66 | S&F 15mm bore brass CP wash basin mixture for mixing hot and cold water complete all as specified fixed including all necessary fittings complete all as specified and directed. |
| 67 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 68 | M& L for Salt glazed stone ware gully trap 150mm square type 'P' includng MS gratings suitable to 150 x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover set in CM 1:6 complete all as specified and as directed. |
| 69 | S&F repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 70 | Material & labour for preparation of new plastered surfaces of wall and applying two coat of white lime wash complete all as specified and directed. |
| 71 | Material & labour for preparation of new plastered surfaces of celling and applying two coat of white lime wash complete all as specified and directed. |
| 72 | Complete removal of existing treatment over wall surces of brick or concrete, pillar, cornices etc at any height including necessary scaffolding etc and applying two alkali & fungal resistance, dirt resistance exterior emulsion weather coat paint of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 73 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed. |
| 74 | Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed. |
| 75 | Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed. |
| 76 | M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLSH grade with multistranded copper conductor ISI marked drawn through heavy duty PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed . |
| 77 | One light point controlled by one switch. |
| 78 | One Exhaust fan point controlled by one switch and one regulator. |
| 79 | One 3 pin switch socket outlet point 5 Amps on independent board. |
| 80 | All as per item No 76.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size. |
| 81 | Supply and fix switch piano, flush type single pole, one way 5 Amps capacity complete all as specified and as directed. |
| 82 | Supply and fix switch piano, flush type single pole, one way 15 Amps capacity complete all as specified and as directed. |
| 83 | Supply and fix socket out let 2 in 1, 3 Pin, 6A combined 2 module complete all as specified and as directed. |
| 84 | Supply and fix socket out let 2 in 1, 3 Pin, 16A combined 2 module complete all as specified and as directed. |
| 85 | Supply and fix ceiling rose surface backlite 65x50 mm 3 terminals complete all as specified and as directed. |
| 86 | Supply and fixixing LED lights fitting 1 x 18 W, 220 V, AC aluminium box type with driver, holder, including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 87 | S & Fix LED 10 W Batten integrated LED channel fitting integral sleek extruded polycarbonate LED chanel with acrylic cover, Neutral/cool white with all accessories all as specified. |
| 88 | Supply and fix sheet metal enclosure distribution board SPN 4 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and as directed. |
| 89 | Supply and fix MCB, single pole, 240 volts, 6 to 32 Amps, complete all as specified and as directed. |
| 90 | Supply and fix MCB, single pole & neutral, 240 volts, 32 Amps, complete all as specified and as directed. |
| 91 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for the following. Note : (i) Two runs of copper conductor, one runs of earth copper conductor and conduilt shall be measured as one length 2x6 sq mm and 1x6 sq mm as earth wire |
| 92 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for the following. Note : (i) Two runs of copper conductor, one runs of earth copper conductor and conduit shall be measured as one length2x2.5 sq mm and 1x2.5 sq mm as earth wire |
| 93 | Supply and fix of exhaust fan, steel body AC single phase. 230 V of size 300 mm sweep with, blades, frame and louvers and including making of holes in wall, floor etc all as specified. |
| 94 | Supply and fix storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good all as specified and directed by Engr-in-charge. |
| 95 | Supply and fixing of double pole sheet metal enclosure with a two pin and earth plug and socket complete MCB of 20 Amp complete all as specified and directed. |
| 96 | Schedule of credit amount of Rs 1,02,019.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
