|
| 1 | Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil complete all as specified and directed . |
| 2 | Excavation in trenches not exceeding 1.5 m width and not exc 1.5 in depth getting out soft disintegrated rock complete all as specified and directed . |
| 3 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil complete all as specified and directed . |
| 4 | Removal of surplus soil to a distance not exceeding 50 m and depositing where complete all as specified and directed . |
| 5 | Supplying and laying in trenches 80 mm dia CPVC Tubing Schedule 80 pipes and including all fitting and fixtures (Schedule 80 ) complete all as specified and directed of the following sizes |
| 6 | Supplying and laying in trenches 50 mm dia CPVC Tubing SDR 11 pipes & plain CPVC SDR 11 fittings and fixtures complete all as specified and directed |
| 7 | All as per item No 6 above but CPVC pipe dia 40 mm dia |
| 8 | All as per item No 6 above but CPVC pipe dia 25 mm diaNote for Item No. 5 to 8: All CPVC Fittings bend ,elbow, tee ,nipple, union ,reducer etc inclusive in quoted item rate. |
| 9 | Material and labour for 150 mm bore Ductile iron Pipe ISI marked (IS 8329:2000) pipes class K-9 of standard length spigot and socket ends push type joint with rubber gasket as jointing material, internal cement mortar coating and external surface with bituminious paint including taking down existing rusted/corroded CI Pipe complete all as specified and directed |
| 10 | Material and labour for 100 mm bore Ductile iron Pipe ISI marked (IS 8329:2000) pipes class K-9 of standard length spigot and socket ends push type joint with rubber gasket as jointing material, internal cement mortar coating and external surface with bituminious paint including taking down existing rusted/corroded CI Pipe complete all as specified and directed |
| 11 | Supply and Fixing CPVC gate/ball valve with rubberized gripper handle suitable for both ends for CPVC pipe and fixed in 25 mm dia pipe. |
| 12 | Supply and Fixing CPVC gate/ball valve suitable for both ends for CPVC pipe and fixed in 50 mm dia pipe. |
| 13 | Supply and Fixing brass gate/ball valve union type with rubberized gripper handle suitable for both ends for CPVC pipe and fixed in 80 mm dia pipe. |
| 14 | Supply and Fixing cast iron sluice valve Class PN 1.6 with iron wheel head screwed both ends for iron pipe and fixed in 100 mm dia pipe. |
| 15 | Supply and fix in repairs cast iron non return valve of size 80mm dia complete all as specified and as directed. |
| 16 | Supply and fix Foot Valve brass conforming to IS 4038, 80 mm dia complete all as specifiedand directed. |
| 17 | Construction of brick masonry valve chamber of size 900x900x1200 mm (internal dia) suitable for 80/50 mm dia sluice valve with necessary earth work excavation plain cement concrete 1:4:8 using 40 mm graded stone aggregate 75 mm thick in cement mortar 1:6 15 mm thick plastering 1:6 inter nally including flooring and externally rep to 15 mm below ground level plain cement concrete 1:4:8 type B1 using 20 mm graded stone aggregate in coping MS sheet cover made out of 3 mm thick MS sheet flat iron frame and bracing with locking arrangement applying two coat of synthetic enamel paint including dismantling removing the existing damage chamber completely removal of debris to a distance not exce eding 50 mtr distance depositing where as directed by Engr - in- charge |
| 18 | Cutting existing steel/gi/cpvc/CI tubing for alterations or additions for any dia/size including inserting necessary fitting such as tee,elbow ,reducer in position including threading work complete all as directed . |
| 19 | Material and labour for cement concrete PCC 1:3:6 type C2 in foundations , filling in mass concrete making good the disturbed surface to match with the adjoining surfaces complete all as specified. Please Enable Macros to View BoQ information |
