|
| 1 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 2 | Supply & Fix PVC coated chainlink fencing ( mesh 50 mm x 50 mm size) minimum nominal dia of wire 4 mm ( including pvc coating ) fixed to fencing posts using suitable bolts and nuts complete all as specified and as directed.Note:- Nuts and bolts will be measured and paid separately. |
| 3 | Dismantling wrought iron or mild steel work of any description complete all as specified and as directed. |
| 4 | Supply and fix mild steel screw bolt ( maching made) with hexagonal or square head at one end and screwed the other with washer n.exc 5 cm long dia bolt 5 to 10mm complete all as specified and as directed by Engineer in charge. |
| 5 | Supply & Fix hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similiar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 6 | Supply and fix steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 4923-1968 Grade St-240 for square or rectangular tube complete all as specified and as directed by Engineer in charge. |
| 7 | Supply & Fix framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similiar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 8 | Supply and fix Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-250, Qlty-A) including necessary cutting in wall complete all as specified and as directed by Engineer in charge. |
| 9 | Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering including aluminium frame complete all as specified and as directed. |
| 10 | Supply & Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet corrugated/Mangalore tile pattern of 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer complete all as specified and as directed. |
| 11 | S& F 0.5 mm thick Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,ridge etc fixed with self tapping screws , rivetting with existing roof sheets/ valley gutters, bolting on to parepat walls etc complete all as specified and as directed. |
| 12 | Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and as directed. |
| 13 | Material & Labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed. |
| 14 | Material & Labour for laterite stone walling of regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 15 | Material & Labour for walling of squared rubble, regular coursed, well bonded, bedded & solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 16 | Material & Labour for laterite stone pitching of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete complete all as specified and as directed. |
| 17 | Material & Labour for kerb stone laying at or near ground level of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 18 | Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified and as directed. |
| 19 | Material & Labour for rendering 15mm thick on stone masonry external surfaces in cement mortar 1:4 and finish the surface even and smooth complete all as specified and as directed. |
| 20 | Material & Labour for struck pointing to squared rubble, coursed or uncoursed in cement mortar 1:3 complete all as specified and as directed. |
| 21 | Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc.. laid bedded and pointed in any mortar including bedding concrete complete all as specified and as directed by Engineer in Charge. |
| 22 | Material and labour for cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate in sub floors, pavings complete all as specified and as directed by Engineer in Charge. |
| 23 | Material and labour for chequered cement concrete tiles 250x250x 25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer in Charge. |
| 24 | Material and labour for 25mm thick flame finished sadarhally machine cut stone of approved colour and shade as in floors, skirting/dado etc over and including 15mm thick backing coat in cement mortar 1:4; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab complete all as specified and as directed by Engineer in Charge. |
| 25 | All as per item no 68 above but except Sadarahally stone complete as specified and directed. |
| 26 | Stone grit for cushion bed below interlocking paver blocks complete all as specified and as directed by Engineer in Charge. |
| 27 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness. M-35 grade with grey cement and pigment complete all as specified and as directed by Engineer in Charge. |
| 28 | All as per item No.74 above but except tiles complete all as specified and as directed by Engineer in Charge. |
| 29 | Material and labour for Machine pressed precast concrete interlocking paver block of approved shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and as directed. |
| 30 | All as per item No.74 above but except tiles complete all as specified and as directed by Engineer in Charge. |
| 31 | Material & Labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 32 | Material & Labour for permix bitumen/ readymix bitumen filed in potholes or unlevelled road surfaces of depth 50mm to 100mm after cleaning the surface throughly using broom, gunny bags etc. The bitumen surface shall be levelled and matched with adjecent road surfaces and should be tamped and consolidated with manual / mechanical methods complete all as specified and directed |
| 33 | Material & Labour for preparation of new kerb stone and applying two coats of synthetic enamel paint on surfaces over a coat of priming paints plaster coat etc. complete all as specied and directed. |
| 34 | M&L for preparation of old painted steel surfaces of any description including rafter , purlin etc..(up to a height of 9 mtr) over 10 cm width or girth and applying one coat of epoxy paint including necessary scaffoldings complete all as specifed and as directed. |
| 35 | Removing excavated material (soil) that has fallen from the mountain to a distance exc. 1.5 Km but n exc. 5.0 km and depositing where directed |
| 36 | Supply and fix in replacement Aluminium Composite Panel 4mm thick of any colour and shade of Alu Bond or equivalent fixed with self tapping screws on existing aluminium frame work complete all as specified and as directed by Engineer in Charge. |
| 37 | Demolation of RCC n.exc 15cm thickness complete all as specified and directed. |
| 38 | Material & Labour for providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, kerbs etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match, type C1, 1:3:6 using 20 mm graded aggregate exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed. |
| 39 | Material & Labour for providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match, type B1, 1:2:4 using 20 mm graded aggregate exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 40 | Material & Labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 41 | Cleaning of existing sadarahalli stone surfaces using mechanical means like jet washing, grinding etc all as specified and as directed by Engr-in-Charge. |
| 42 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed |
| 43 | Material & Labour for plain cement concrete 1:2:4 type B- 1 (using 20mm graded stone aggregate) as in road berms and finishing top surface even and rough complete all as specified and as directed. |
| 44 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade 'A' including necessary formwork etc complete |
| 45 | Supply and Fix in repair Recess mounted 36W luminer 2x2 Tile, out put lumen greater than 100 lumen/wattsGlare free uniform illimination housing with opel diffuser with colour temp 6000K with driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in charge. Please Enable Macros to View BoQ information |
