|
| 1 | M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, and making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder VG-30 grade 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm. complete all as specified and directed. |
| 2 | M&L Preparing existing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc and applying evenly a priming tack coat with paving Bitumen VG-30 grade over the prepared surface by mechanical sprayer @ 5 kgs/10 Sqm of surface area complete all as specified and directed. |
| 3 | M&L premix bituminous macadam laid, rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade, content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher complete all as specified and directed.(Note- Mix Shall be obtained from automatic hot mix plant and shall be laid by mechanical paver) |
| 4 | M&L for bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed.NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula by GE before commencement of work irrespective of what ever indicated in Sch 'A'.(ii) Price adjustment shall be done on MINUS side only @ Rs. 55,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'.(iii) No Price adjustment for Bitumen shall be done for variation on plus side.(iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account. |
| 5 | M&L Preparation of new/old black top surfaces and applying thermoplastic reflective paint for marking of minimum 2 mm thick single coat as in centre line and edge line, zebra crossing, stop lines etc., road marking of 150/100mm width using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate, inter filler, thermoplastic requirement for glass beads shall be as per the table No 800.4 of most specification conforming to BS-6086 of most specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacture's instructions and as directed. |
| 6 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 7 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) in any type soil, each n.exc 0.5 cum, getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. |
| 9 | S&F convex mirror 1200 mm dia and made up of polycabonate material provided with 75 mm dia MS pipe 2100 mm height medium grade duly powder coated with adjustable fixing brackets for MS pipe used for road turning intersections curves T junctions Hospital,Parking lots etc and also ideal for surveillance with clear and definite mirror image having 130 degree of viewing anglewith unbreakble and strong mirror complete all as specified and as directed. |
| 10 | M&L for PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and directed. |
| 11 | S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 12 | S&F in repair ABS/Plastic speed breaker of size 250mmx350 mmx50 mm blocks black and yellow colour having reflectors on both sides including installation of epoxy and spikes for anchoring complete all as specified and directed.Note - 1. Hollow back surface of speed breaker to be filled wit CM (1:4) complete all as specified, Cost for the same is included in the item rate. |
| 13 | S&F in repairs ABS /Plastic flexible spring parking post barrier high grade polyurethene material with 3 white reflective tapes easy to install complete all as specified and directed. |
| 14 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 15 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 16 | M&L for 15mm thick plastering on fair faces of brick wall in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. |
| 18 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwisespecifically provided for complete all as specified and directed. |
| 19 | M&L for 80 mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block, M-40 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 with and including over 25 mm thick sand cushioning for laying of inter locking paver block compacting and proper embedding/ laying of inter locking paver blocks in to the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern over and including providing cement concrete 1:4:8 type D2 using 40 mm graded stone agg 75 mm thick as in sub base of floor over rammed earth as in sub base to receive floor finish complete all as specified and directed.Note- Design/Shade of rubber moulded machine pressed precast concrete Paver block shall ba as approved by GE. |
| 20 | M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 21 | Demolition of concrete of any description and in any position not otherwise specifically provided for Cement concrete ( reinforced) complete all as specified and directed. |
| 22 | M&L for RCC Nominal mix (1:2:4) type B1 (using 20mm graded stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves complete all as specified and directed. |
| 23 | M&L for formwork rough finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landing slab and similar work, not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed. |
| 24 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | Refixing precast concrete interlocking paver block any size and shape including and over 25 mm thick sand cushioninig of interlocking tiles(Paver block) after cleaning of pavers with wire brushes and water complete all as specified and directed. Please Enable Macros to View BoQ information |
