|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work:Repair/Maintenance of pumping system, pipelines and Control Valves under GE (Utilities) Udhampur Contract No: GE/U-62/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of soft/dense soil, complete all as specified and directed by Engr-in-Charge. |
| 3 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge. |
| 4 | Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket with rubber gasket complete all as specified and directed by Engr-in-Charge. |
| 6 | Refixing MS/DI/CI pipe obtained from item No. 04 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engr-in-Charge. |
| 8 | Taking up or down CI/DI/MS water mains pipe 200 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. |
| 9 | Refixing MS/DI/CI pipe obtained from item No. 16 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. |
| 12 | Refixing GI/CI pipe obtained from Item No.19 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge. |
| 13 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 14 | Taking up or down GI pipe of size bore of pipe 100mm diaincluding all fittings complete all as specified and directed by Engr-in-Charge. |
| 15 | Description all as per Item Ser No 13.00 here-in-before, but of size 80mm dia |
| 16 | Description all as per Item Ser No 13.00 here-in-before, but of size 50mm dia |
| 17 | Description all as per Item Ser No 13.00 here-in-before, but of size 40mm dia |
| 18 | Description all as per Item Ser No 13.00 here-in-before, but of size 25mm dia |
| 19 | Description all as per Item Ser No 13.00 here-in-before, but of size 20mm dia |
| 20 | Refixing GI/CI pipe obtained from Item No. 13 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of fbore 100mm dia. Complete including main/branch connections complete all as specified and directed by Engr-in-Charge. |
| 21 | Description all as per Item Ser No 19.00 here-in-before, bore of pipe 80mm dia |
| 22 | Description all as per Item Ser No 19.00 here-in-before, bore of pipe 50mm dia |
| 23 | Supply & fixing only GI pipes in repair of bore of pipe 100mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 24 | Description all as per Item Ser No 22.00 here-in-before, but size of dia 80 mm dia |
| 25 | Description all as per Item Ser No 22.00 here-in-before, but size of dia 50 mm dia |
| 26 | Description all as per Item Ser No 22.00 here-in-before, but size of dia 40 mm dia |
| 27 | Description all as per Item Ser No 22.00 here-in-before, but size of dia 25 mm dia |
| 28 | Description all as per Item Ser No 22.00 here-in-before, but size of dia 20 mm dia |
| 29 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pillar complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply fabrication and fixing MS joints like Flanged, bends, Tapers, tail piece (any type) caps, plugs for 100 mm to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 31 | Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 32 | Stem bush bronze |
| 33 | Gland flange cast iron |
| 34 | Stud/Bolt carbon steel |
| 35 | Stem nut/chaknut |
| 36 | Stem Stain less steel |
| 37 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. |
| 38 | Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 39 | Stem bush bronze |
| 40 | Gland flange cast iron |
| 41 | Stud/Bolt carbon steel |
| 42 | Stem nut/chaknut |
| 43 | Stem Stain less steel |
| 44 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 45 | Stem bush bronze |
| 46 | Gland flange cast iron |
| 47 | Stud/Bolt carbon steel |
| 48 | Stem nut/chaknut |
| 49 | Stem Stain less steel |
| 50 | Decoupling, disconnecting sluice valve of size 100 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 51 | Stem bush bronze |
| 52 | Gland flange cast iron |
| 53 | Stud/Bolt carbon steel |
| 54 | Stem nut/chaknut |
| 55 | Stem Stain less steel |
| 56 | Supply and fix in replacement cast iron sluice valve of 300 mm dia (PN 1.6) ISI Marked with iron wheel head both end flanged, steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers etc, including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 57 | Description all as per Item Ser No 35.00 here-in-before, but of size 250mm dia. |
| 58 | Description all as per Item Ser No 35.00 here-in-before, but of size 200mm dia. |
| 59 | Description all as per Item Ser No 35.00 here-in-before, but of size 150mm dia |
| 60 | Description all as per Item Ser No 35.00 here-in-before, but of size 100mm dia |
| 61 | Description all as per Item Ser No 35.00 here-in-before, but of size 80mm dia |
| 62 | Description all as per Item Ser No 35.00 here-in-before, but of size 50mm dia |
| 63 | Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers with arrangement for fixing, including taking down complete.Item Code No/ Size CI 026/N Make: Leader or equivelant in Kirloskar/BVI/BIR. complete all as specified and directed by Engr-in-Charge. |
| 64 | Description all as per Item Ser No 42.00 here-in-before, but of size 80 mm dia and Item code No/ Size CI 026/L |
| 65 | Material and labour for spraying herbicide (Round up) on area to remove unwanted vegitation/grass at various locations complete all as specified and directed by Engr-in-Charge. |
| 66 | Material and labour for shifting heavy items /using excavator / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley ect as required at site complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fixing leather gasket including replacement old UNSV gasket for 300/250 mm complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply and fixing leather gasket including replacement old UNSV gasket for 200/150 mm complete all as specified and directed by Engr-in-Charge.. |
| 69 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore passing through NHAI, BRO , by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge.Note:- (i) Contractor fully responsible for for jointing work required T&P equipment, and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra fittings/pipe will be measured and paid separately (iii) Necessary permission from civil authorities may be obtained where road cutting involves. |
| 70 | Material and labour for repair to leaking flanged/circular welding joints of 250 to 300 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. |
| 71 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. |
| 72 | Supply and fix Gland packing type 3 of size 8 mm made of asbustus grip with silicon complete all as specified and as directed by Engr-in-Charge. |
| 73 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn complete all as specified and directed by Engr-in-Charge.Make: Servo ( IOC)/Bhart petrolium/Castrol or equivalent make approved by E-in-C's Branch. |
| 74 | Supply only lead wool /spunyarn for jointing the CI pipes complete all as specified and directed by Engr-in-Charge. |
| 75 | Supply only leadl for jointing socket and spigot CI pipes complete all as specified and directed by Engr-in-Charge. |
| 76 | Demolition of existing valve pit chamber , M&L for masonry valve pit of size 900x900x900mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and as directed by Engr-in-Charge. |
| 78 | Supply and fix in replacement of gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified & directed by Engr-in-Charge. |
| 79 | Description all as per item Ser No 57.00 here-in-before, but of dia 40 mm gate valve. |
| 80 | Description all as per item Ser No 57.00 here-in-before, but of dia 25 mm gate valve. |
| 81 | Description all as per item Ser No 57.00 here-in-before, but of dia 20 mm gate valve. |
| 82 | Description all as per item Ser No 57.00 here-in-before, but of dia 15 mm gate valve. |
| 83 | Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc complete all as specified & directed by Engr-in-Charge. |
| 84 | Material and labour for fabrication of MS sheets ,angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint complete all as specified and directed by Engr -in - Charge. |
| 85 | Supply and fixing GI fittings medium grade ISI marked including complete all as required at site and as directed by Engr-in-Charge. |
| 86 | Elbow 15mm |
| 87 | Elbow 20mm |
| 88 | Elbow 25mm |
| 89 | Elbow 40mm |
| 90 | Elbow 50mm |
| 91 | Elbow 80mm |
| 92 | Socket 15mm |
| 93 | Socket 20mm |
| 94 | Socket 25mm |
| 95 | Socket 40mm |
| 96 | Socket 50mm |
| 97 | Socket 80mm |
| 98 | Union 15mm |
| 99 | Union 20mm |
| 100 | Union 25mm |
| 101 | Union 40mm |
| 102 | Union 50mm |
| 103 | Union 80mm |
| 104 | Nipple 15 x 100 mm |
| 105 | Nipple 20 x100mm |
| 106 | Nipple 25 x 100mm |
| 107 | Nipple 40 x 100mm |
| 108 | Nipple 50 x 100mm |
| 109 | Tee 15mm |
| 110 | Tee 20mm |
| 111 | Tee 25mm |
| 112 | Tee 20x15mm |
| 113 | Tee 25x20mm |
| 114 | Tee 40x15mm |
| 115 | Tee 40x20mm |
| 116 | Tee 40x25mm |
| 117 | Tee 50x25mm |
| 118 | Dead plug 15mm |
| 119 | Dead plug 20mm |
| 120 | Dead plug 25mm |
| 121 | Dead plug 40mm |
| 122 | Dead plug 50mm |
| 123 | Supply only 0-Tolidine reagent (500 ml) for chlorine estimation with four nos chloroscope for various pump houses complete all as specified and directed by Engr-in-charge. |
| 124 | M & L for loose filling in pump houses, under header, under road cuttings etc of hard core broken to gauge not exc 63 mm broken stone/boulders incl leveling and spreading llime stone powder under stones complete all as specified and directed by Engr-in-charge. |
| 125 | Material & labour for electromagnetic flowmeter for JNE Main Line with signal converter with gapichal led display to operate 250VAC .4-20mA with IOT Device,flange type to measure the flow of liquid at maximum temp 180 degree Celsius, DN 100 complete all as specified and directed by Engr-in-charge. |
| 126 | Supply and fixing in replacement of butterfly valve of size 80 mm (PN 1.6) (ISI Marked) gtype complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and as directed by Engr-in-charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
