|
| 1 | Taking down steel rolling shutter and resecuring or erasing and adjusting of steel rolling shutter any type with grease/oiling and welding as required and fixing loose portion of shutter etc of any description n. exc 10 sqm each shutters etc refixing with or with out ball bearing including to cover side guide rail and greasing of MS spring and side guide and make functional including complete as entire satisfication of Engr-in-Charge. (Note : Supply of material to be measured seperately) |
| 2 | S&F in repair of MS pipe medium grade of dia upto 40 mm including cutting and fixing, drilling, welding for rolling shutter all as directed by Engr-in-Charge. |
| 3 | S&F in repair spring of high carbon spring 30mm dia drilling, welding for rolling shutter all as directed by Engri-in-Charge. |
| 4 | S&F in repair of mild steel rolling shutter strips made out of 1.25 mm MS sheet including and reavting including one coat of primer and two coat of synthetic enmail paint all as directed Engr-in-Charge. |
| 5 | Supply and fix mild steel 1.25 mm thick rolling shutter without ball baring but gear operated with bevel gear box and crank handle including top cover anchor rod, hasp and staple including in two partirtation (as reqd ), including high carban steel spring, locking device and etc all as directed by Engr -in Charge |
| 6 | S&F in repair for safety lever locks mild steel with 4 levers complete all as specified and directed |
| 7 | S&F in repair ball bearing for rolling shutter complete all as specified and directed |
| 8 | Providing services on related to welding & black smith work based on day to day complaints on all working days (except Sunday and gazetted Holiday ) from 0900 hours 1700 hours complete all as specified and directed. Note- 1.The above task shall be carried out by deploying minimum 01 welder having black smith skills and 01 Helper on daily basis. 2) Necessary T&P, ladders,minor consumable viz welding rods/extras , equipments and safety gear shall be provided by the contractors. 3) All replaceble material shall be issued from MES store. |
| 9 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existing CGI/Asbestos sheet complete all as specified. |
| 10 | S&F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet incl taking down existing CGI/Asbestos sheet complete all as specified. |
| 11 | S&F in repair soft closing hinges L Bihari complete all as specified and as directed by Engr-in-Charge. |
| 12 | S&F in repair Telescopic channels 300mm long of chromium plated steel, superior quality with stainless steel ball rollers for fixing to cabinets drawers. complete all as specified and as directed |
| 13 | S&F in repair Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed. |
| 14 | S&F in repair fancy type Curtain rods decorative type stainless steel 25mm nominal dia of approved quality(Make VISTA) (1mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 1.80m long) complete all as directed and specified. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 16 | Dismantling posts or struts (woo,steel, or RCC) any section, incl taking out embedded portion & making good disturbed ground,post embedded in concrete , brick work, masonary etc. |
| 17 | M & L for mild steel work , Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including erection in ground complete all as specified and directed. |
| 18 | S&F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long complete all as specified . |
| 19 | S&F Expanded metal not exc 4 kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified. |
| 20 | S&F for Mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including cutting etc complete all as specified. |
| 21 | M&L for steel gate Ornamental type/Grill work including hold fasts, pintels, stoppers running rails, bushes and all as CI decorative pieces, locking arrangement etc complete all as per design approved and as directed by Engr-in-charge work conforming to Fe-410-O etc complete. |
| 22 | Supply only Chain link MS galvanisd fencing any size or type ( approved by GE) including line wires, any mesh, size and type to any of standards , rails , staining bolts, etc including provision of bindings wire complete all as specified and directed. |
| 23 | Fixing only Chain link MS galvanisd fencing any size or type ( approved by GE) including line wires, any mesh, size and type to any of standards , rails , staining bolts, etc including provision of bindings wire complete all as specified and directed. |
| 24 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified. |
| 25 | M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 26 | S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note : Glass / wiremesh/ partical board/ ACP board etc any type paid separately) |
| 27 | S & F 4 mm thick aluminium composite panel sheet colour matching with aluminium door and frame fixed with aluminium partations, door, cupboard etc complete all as specified and as directed. |
| 28 | S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wiremesh etc any type paid separately) |
| 29 | S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 30 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 31 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 32 | PCC (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in brenching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed. |
| 33 | M & L for PCC 1:2:4 type B-2 using 20mm graded stone aggregate as in surface channels and drains all as specified and directed. |
| 34 | M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 35 | M & L for preparation of old Steel and Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed. |
| 36 | S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including demolition of existing slab covers, including necessary reinfocement, complete all as specified and as directed. |
| 37 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) complete all as specified and directed. |
| 38 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in floor Finishing fair and even without using extra cement complete. |
| 39 | M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floors, plinth protection, Path etc (finished even and fair) laid in panels including joints filled with sealing compound grade 'A' complete all as directed by Engr-in-Charge |
| 40 | S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. including dismantling old unserviceable cup booards WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 41 | S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. including dismantling old unserviceable cup booards WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 42 | S & F for Hettich soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich and make as per approved make list and as approved by GE). |
| 43 | S&F 20 inch ( 50 CM) soft closure hinges telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich and make as per approved make list and as approved by GE). |
| 44 | S&F Magnetic catch for wooden cupboard with complete closer mechanism claps and clips fix with stainless steel screw. Complete all as specified and as directed. |
| 45 | S & F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed. |
| 46 | S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich as approved by Engr-in-Charge). |
| 47 | Stainless steel thali basket of size 370mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 48 | S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 49 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. |
| 50 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed. |
| 51 | Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note :- This Item will be also executed in highrise bldgs (G+8) and necessary provision for T&P, scaffoling and safety measures (100 % compulsory scaffoling ) etc shall deemed to be included in unit rate quoted by the tenderer for the same.) |
| 52 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed. |
| 53 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces wall, pillars, cornices, chajja, fascia drop wall, parapet, roof projection over hanging slab etc in cement mortar 1:4 and finished even and fair with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and fair complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely). |
| 54 | M & L Rendering 10 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge. |
| 55 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces wall, pillars, cornices, chajja, fascia drop wall, parapet, roof projection over hanging slab etc in cement mortar 1:4 and finished even and fair with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and fair complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely). |
| 56 | Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 9th floor complete all as specified. |
| 57 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine or suitable brushes & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of atleast strength equivalent of M-40 concrete of average 25 mm thickness.Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. |
| 58 | M&L for preparation of newly plastered external surface decorated brick/concrete plastered or unplastered surfaces/pop surface of wall , ceiling, pillars, cornices, chajja, fascia drop wall, parapet, roof projection over hanging slab etc and applying 1 mm thick external cement based wall care putty with weather proofing coats and applying Smart Peroidical Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm of required shade and colour complete, as per manufacturer's specification etc complete all as specified and directed. Note :- This item will be also executed in highrise bldgs G+8 floor height and necessary provision for T&P, scaffoling and safety measures etc |
| 59 | M & L for preparation of new surface including preparing of plastered or unplastered surfaces / concrete surface of wall etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed. |
| 60 | M & L for preparation of new decorated concrete /plastered/un-plastered surfaces of wall/ceiling etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and applying two coat of white wash complete all as specified and directed. |
| 61 | M&L for complete removal of existing treatment from external surfaces of wall, pillar, cornices, chajja facia drop wall parapet, roof projection over hanging slabs etc decorated brick/concrete plastered or unplastered surfaces/pop surface of wall by mechanised sander of Asian paints truecare wall sander or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible complete all as directed by Engineer in charge and applying Smart Peroidical Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces, incl one coat of primer as specified and all as directed. Note : This item will be also executed in highrise bldgs G+8 floor height and necessary provision for T&P, 100 %compulsory scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.) |
| 62 | Preparation of surface with Washing, rubbing down and stopping of distempered and painted surface with sand paper / Putty in accordance to standard Engineering practices to make the surface free from dust, loose paint etc. Complete all as specified and as directed by Engr- In - Charge. |
| 63 | Providing and applying two coats of smooth acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10 Sqm diluted with water in 2:1 ratio applied over and including a coat of primer @0.90 Litre/10 sqm complete all as specified and directed.Note for item No 61, 62 & 63: (A) All FINISHES (i.e Paint/Putty/Primer) shall be got executed through authorised applicators of manufacturers. The contractor shall submit MoU on non judicial stamp paper of Rs. 100 with any manufacturers of Finishes listed at Particular Specifications from which he proposes to carry out the work of these items in BOQ. The MoU shall cover guarantee and defects rectification during the guarantee period and MoU sahll not older than 30 days from the bid submission start date of tender. For guarantee clause ref of Particular Specification be made.Note:- (1) Periodical visit of the site shall be carried out by the manufacturer of finishes to ascertain the quality of work. The contractor shall obtain a performance certificate to this effect from the manufactureer and submit to GE, before issue of completion.(2) Non submission/ uploading of MoU/LOI (letter of intent) with Tech Bid (Cover-I) will result in rejection of technical bid during evaluation. Thus bidders not uploading the MoU/LOI (Letter of intent) alongwith DD, EMD (as applicable), Application etc, shall be rejected in Tech evaluation.Authorized applicator of paint manufacturers shall have valid authorization letter from the manyfacturer (minimum regional HQs). The authorisaton letter needs to also be valid for the complete period of execution. (B) List of Bldgs:- Bldg No P-13 (Manekshaw Marg) & P-65 & P-66 (Urban Village) |
| 64 | Preparation of old painted surfaces of wood work of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 65 | Taking out roots from roof/brick wall and making good the disturbed surface with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate including Removal of plant growth by injecting with chemical (glyphosphate solution of 4% concentration) @ 20ml per injection or till refusal by cut stem of plants or roots injected at 30mm distance on the girth. The area shall then be sprayed with 25 ml (glyphosphate solution 4% concentration) diluted with 1 ltr of water. including treating affected area with acid wash to check further growth of vegetation and disposing off the rubbish from site (MoD land) from the above mentioned area complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 66 | Taking out roots from roof/brick wall and making good the disturbed surface with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate including Removal of plant growth by injecting with chemical (glyphosphate solution of 4% concentration) @ 20ml per injection or till refusal by cut stem of plants or roots injected at 30mm distance on the girth. The area shall then be sprayed with 25 ml (glyphosphate solution 4% concentration) diluted with 1 ltr of water. including treating affected area with acid wash to check further growth of vegetation and disposing off the rubbish from site (MoD land) from the above mentioned area complete all as specified and as directed. Please Enable Macros to View BoQ information |
