|
| 1 | Lifting flap shutter on channel for feeding including tying with suitable galvanized wire to iron bracket to guard against falling down, as per direction of the Engineer-in-charge.a) with galvanized wire rope |
| 2 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Distributtories / Branch Canal / Minor Canal / Channel as per IS : 5620 - 2000 / Latest Revision consisting of skin plate, vertical and horizontal girder, stiffener etc. made of MS material consisting of angle, channel, beam, plate, flat etc. conforming to IS : 2062 - 2011 / Latest revision manufactured as per approved drawing and direction of Engineer - in - charge. The cost includes cost of Materials, Machinaries, manpower, cutting Aligning, drilling, Welding, Finishing, Consumables, Carriage and overheads with all leads and lifts complete as per specification (without painting). |
| 3 | Supplying fitting and fixing screw rod having square thread of 1.5 / 2 T.P.I. Material bright steel [EN 8 / EN 9 / Forgrd CL 4 45 C8 as per IS 1875 1992 (Latest revision) dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer - in - Charge The cost includes cost of Materials, Machineries, Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumbles like cutting tools, emari paper, cloths, hire charges of machineries tools and tackles, greeze, mobil etc. including carriage, loading, unloading as per direction of Engineer in Charge. a) Upto length 3 metre. |
| 4 | Supplying fitting and fixing of C.i wheel in the screw hoisting system of lifting and lowering the draw shutter. The wheel consisting of suitable size ms hub to accomodate any size of G.M/C.I nut. The rim dia 32 mm and four nos arm of wheel are made of minor dia 30 mm. & major dia 36mm. dia rod complete as per approved drawing & direction of the Engineer-in-charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing consumbles like cutting tools, welding rod hire charges of machineries like bending machine, lathe machinegrinding machine, welding set tools & tackles etc. including carriage loading and unloading (a) Upto 60 cm. dia. Cast Iron wheel. |
| 5 | Supplying, fifling & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 6 | Supplying fitting and fixing M/S fabricated pedestal stool of suitable size consisting of bottom plate, top plate, four nos. legs etc.fabricated with suitable sizes m.s. plate, m.s. angle conforming to IS 2062 of latest revision as per approved drawing and direction of Engineer in charge. The cost includes cost of materials, man power employed dismantling and fitting fixing civil works consumbles like cutting tools, gas, oxygen, welding rod anchor bolt of required size hire charges of machineries like gas cutting set, welding set, tools and tackles etc. including carriage loading and unloading |
| 7 | Cost for supplying and fifling fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ S B Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.a) 65mm x 6 mm. |
| 8 | Sypplying of M.S bolt with nut for clamping Rubber seal as per direction of EIC |
| 9 | Cost for supplying and fifling fixing of bulb/musical node/J- type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/S B Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.a) solid bulb size- 40x 140 X 10 mm |
| 10 | Painting with ready mixed Black Japan of approved make and brand including smoothening surface. b) Two coats. |
| 11 | Oiling greasing of headstock assembly (for screw hoist system) of regulator gates of canal/ river by cleaning, checking, greasing, screw rod, G.M nut, Thrust bearing, guide channel, etc including all charges of man & materials which include refilling of gear oil, oiling greasing and fixing of missing nut & bolts & oil seals etc to complete the job as per direction o: EIC. |
| 12 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 13 | Extra rate over Item No 16 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. Two extra lead Please Enable Macros to View BoQ information |
