|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (ARMY) AHMEDABAD NAME OF WORK : SPECIAL REPAIR TO TOILET/BATHROOM AND IMPROVEMENT OF ELECTRICAL INFRA AT AUDITORIUM OF APS AHMEDABAD CANTT CONTRACT AGREEMENT: GE (A)/ABD/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricksstraight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6 complete all as specified and directed.. |
| 4 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed. |
| 5 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete all as specified and directed. |
| 6 | Supply and fixing factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4-5mm thick Moulded PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, either particle board core supplying & fixing in frame complete all as specified and directed. |
| 7 | S&F Butt hinges, medium weight coldrolled mild steel and fixed 125mm size. |
| 8 | Supply & Fixing 150 mm Aluminium anodised,barrel tower bolts of extruded section and fixed chromium plated decorative type complete all as specified and directed. |
| 9 | S&F 150 mm size aluminium anodised door handles. |
| 10 | Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 11 | M&L 10mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished even and smooth without using extra cement. |
| 12 | M & L for 10mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all as specified and directed. |
| 13 | M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed. |
| 14 | All as per item no 12 above but three coat of white wash on ceiling complete all as specified and directed. |
| 15 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing (but not backing) removing serviceable tiles and rubbish off the premises. |
| 16 | M & L for coloured glazed ceramic tiles of size 450X 350X 7mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in CM 1:4, complete all as specified and directed. complete all as specified and directed. |
| 17 | M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 0.06 sqm but not exceeding 0.11 sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed. |
| 18 | M & L for 18-20 mm thick granite slab (Red/black) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3).(All exposed surfaces should be bull nosed) |
| 19 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 20 | S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed. |
| 21 | Taking up or down GI tubing 15/20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 22 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified |
| 23 | Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth. |
| 24 | S & F in repairs viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified and directed. |
| 25 | S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed. |
| 26 | S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down/ Dismantling existing unserviceable WC of any description and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed. |
| 27 | S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed. |
| 28 | S&F vitreous china counter TOP wash hand basin, WHITE OF SIZE 425X425X145MM including brass coupling 32mm, bottle trap of 32mm size long. catalog no ONS-WHT-10901 |
| 29 | S & F 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed. |
| 30 | S & F in repairs Bib taps fancy type chronium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore complete all as specified and directed. |
| 31 | S&F in repairs, for Pillar taps with Sensor, cast copper alloy, chromium plated,screwed down high pressure, with long screwed , swan neck, screwed for iron fixed 15mm bore pipe complete all as specified and as directed |
| 32 | S & F in repairs stop valvew/Angle valves fancy type chromium palted with long shank and cup screwed for iron pipe of 15 mm bore, screwed both ends includinf necdessary fittings such as sockets ofr pipes or for union complete all as specified and as directed |
| 33 | S&F in repair health faucet with one meter tube and hook complete all as specified and directed.(Cat part No BEA-81 of Make-Prayag or its equivalen make). |
| 34 | S/F grating doom 150 mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed. |
| 35 | S&F in repair designer LED looking mirror with touch sensor, wall mount, 3 light effects, Glass, Rectangular (size 18x24 Inch) fixing on wall with brass fixing knob complete all as specified and as directed |
| 36 | S&F in repair full stall Urinal with Sensor kit,spreader and fixing accessories set of size 360x350x710mm fixing on wall complete all as specified and as directed by Engr-in-charge. ( Make- Jaquar) |
| 37 | S&F in repair Soap dispensor Metallic Bottle (CAN-CHR-1137N) fixing on wall complete all as specified and as directed by Engr-in-charge. (Make- Jaquar) |
| 38 | S&F in repair 18 mm (+0.7mm) thick solid PVC Sheet one side prelam for cupboard shutter of density 600 Kg/Cbm bent 900 and finish at all edges at level for making edges at level for making edge lipping/bendingor 0.5 mm thick PVC sheet lipping at 4 edges using bonding taps, handleand locking arrangment etc complete all as specified and as directed |
| 39 | S&F in repair Magic automatic infrared Sensor High Jet Speed Fast dry hand dryer (White), fixing on wall complete all as specified and as directed by Engr-in-charge. ( Make- Jaquar). |
| 40 | M & L for cement concrete 1:4:8, 75 mm thick type D-1,(using 40mm graded stone aggregates), and laid in as floor subbase finished fair and even without using extra cement complete all as specified and as directed. |
| 41 | M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling. |
| 42 | Dismentaling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 100 mm dia. |
| 43 | Dismentaling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 75 mm dia. |
| 44 | S&F for PVC (SWR) floor trap 100/75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs. |
| 45 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid under floors bore of 110 mm including bends, socket and fixing material complete all as specified and as directed. |
| 46 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid under floors .of pipe 75 mm including bends, socket and fixing material complete all as specified and as directed.. |
| 47 | Taking down carefully aluminum / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switches, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 48 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, 60 mm deep with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:-One light point/Ceiling/Exhaust controlled by one switch |
| 49 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, 60 mm deep with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:-One 6A socket point controlled by one switch on independent board |
| 50 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, 60 mm deep with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:-One 6A socket point controlled by one switch on same board |
| 51 | All as per srl item no. 47.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board. |
| 52 | Supply & Fix in replacement of modular switch one way 6 amp 1 module all as specified and directed |
| 53 | S&F in replacement of modular switch one way 16 amp 1 module all as specified and directed |
| 54 | S&F in replacement of modular socket 6 amp 2/3 pin combined 2 module all as specified and directed |
| 55 | S&F in replacement of modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed |
| 56 | Supply and fix in replacement of ceiling rose 6 Amps, 3 plate, 240V, 50Hz complete all as specified and directed. |
| 57 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 58 | Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 59 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts 3 in 1 color modes with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 60 | Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 7 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Philips Model: Moonglade Picture Light Silver or equivalent in make of Havells/ Wipro/ Bajaj. |
| 61 | Supply and fix in replacement of sleek round recessed cum surface mounting 3 in 1 LED down light 10 W with poly-carbonate body, finish with drop down PC diffuser warm white/ full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 62 | Supply and fix in replacement of surface spotlight LED 7 W capacity, complete with die cast aluminum housing, high efficiency, with suitable reflector/lens, warm white/ full white with integrated electronic driver, including mounting base and other accessories and fixing on ceiling or wall surface, including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 63 | Supply and fix in replacement of LED profile light strip 7W per meter having 96 LEDs per meter , IP-65 protection, warm white/CDL/R/G/B/P as specified, mounted in gypsum false ceiling in suitable extruded aluminum profile with opal diffuser, end caps, straight connector, corner connector and mounting clips including making good electrical connection with suitable driver/adaptor and other necessary accessories to make it serviceable condition complete all as specifed and directed. |
| 64 | Supply and fix in replacement of LED Post Top Lantern light fitting 35/40 watt capacity with transparent diffuser and fixing arrangement on new GI pipe medium grade of dia 80mm and duly grouted on wall/brik pillar with the help of cement mortar including making electrical connection with PVC insulated and PVC sheathed twisted three core wire of size 1.5 sqmm complete all as specified and directed at site. |
| 65 | Taking down existing old ceiling / exhaust fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades and deposited to AGE E/M store yard complete all as specified and directed. |
| 66 | Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 67 | Supply and fix MCB distribution board, SPN, 8 way in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 68 | Supply and fix MCB 63A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed. |
| 69 | Supply and fix MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz complete all as specified and directed. |
| 70 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter). The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including medium grade rigid PVC conduit upto 7 mtr incl cutting and chases on wall / floor and making good using PCC work complete all as specified and directed. |
| 71 | Material and labour for servicing, repairing and welding to out door LT Panel / LT Feeder Piller box by (i) Cleaning with blower, (ii) Cleaning with CTC/Petrol (iii) Replacement of damaged copper/aluminium lugs (iv) Replacement of deteriorated copper wiring with existing sizes of cable (v) Cleaning and tightening of MCCB terminals (vi) Replacement and fixing of sheared rubber beadings (vii) Rectifying of loose connections of incoming and outgoing cables (viii) Painting two coat of smoke gray colour over one coat of primer and black paint on base channel after rubing with emery paper and making smooth finishes by using spray machine inclusive of writing SM / MES No / name of feeders etc. (not exceeding of height 5 cm each) (ix) Providing of door locking arrangement with of sliding bolts on panel door (x) Proper welding of Panel door/roof as required (xi) Connecting / cleaning of earth wire /earth strip (x) Two coat of white distemper on foundation. |
| 72 | Taking down old rusted galvanized iron pipe including supply & Fix galvanized pipe 80 mm bore light grade in trenches / road / nallah or fixed along wall/ pole including mild steel clamps, screws etc, complete all as specified and directed. |
| 73 | All as per Item no-71.00 above but of size 40 mm complete all as specified and directed. |
| 74 | Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete all as specified and directed. Note: Earth work ( Excavation, Returning & refilling and removal), cable protection HDPE pipe, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.:-35 Sqmm 3.5 core |
| 75 | Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete all as specified and directed. Note: Earth work ( Excavation, Returning & refilling and removal), cable protection HDPE pipe, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.:-16 sq.mm 4 core |
| 76 | Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete all as specified and directed. Note: Earth work ( Excavation, Returning & refilling and removal), cable protection HDPE pipe, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.:-10 sq.mm 4 core |
| 77 | Excavation in trenches in any type of soft soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays complete all as specified and directed.. |
| 78 | Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required. |
| 79 | Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point. |
| 80 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 81 | Taking down carefully old unserviceable security light fittings and S & F in replacement of security light fittings suitable for LED 90 watt with lens complete with all accessories complete all as specified and directed. |
| 82 | Taking down carefully old unserviceable light fittings and Supply and fixing LED flood light luminaries of 250W, with pressure die cast aluminium housing with sealed toughened glass cover in frame ,IP 65 protection and with all fixing arrangement , nuts, bolts and washer connecting to electric system with 2.5 Sqmm PVC Aluminium stranded conductor 2 core up to require length and to be fixed on 11 Mtr long pole including taking down old unserviceable fitting any type and description complete all as specified and directed. |
| 83 | Supply and fixing PVC insulated PVC sheathed round work shop cable three core 1.5 Sqmm with multi stranded copper conductor for making connection from junction box to light fitting complete with suitable size copper lugs. |
| 84 | Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. |
| 85 | Supply and fix MCCB 160A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. |
| 86 | Material and labour for preparation of old painted surcaces using polish and painting two coats of aluminium paint on exposed surfaces to steel tubular LT/HT Pole upto 9 mtretc including 5 Nos. of strip / bands painted with post office white and black colour (300 mm each) in alternate layer from coaping, marking of pole number with black synthetic enamel paint 2.5 cm height including in 6\\" dia circle complete all as directed. |
| 87 | Supply and fix in replacement PVC / DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof suitable for outdoor installation for Gate light and Post top lantern, fixed on wall with screw & rawal plug and on GI Pipe wth suitable size MS clamp and Nut-bolts,washer of size 140x140x95 mm complete including one connector block three terminals and PVC cable gland 02 Nos for incoming and outgoing cables with provn of 01 nos single pole MCBs 10-32 amps inside the box including taking out/down existing unserviceable junction box of any description complete all as specified and directed at site.Make : Syntex model No-GSJB 1414 or any equivalent moden in Naptune/Hensel. |
| 88 | S&F AC Three phase HT/CT Multifunction Bi-directional Compliant Meter in Projection type with DLMS protocol & Accuracy class 0.2sec for both active and reactive energy, Rating 3x63.5V, -/5A, 50 Hz with optical, RS232 & RS 485 Ports, Backlit LCD Display , (Measures import kWh, kVAh, quadrantwise kVArh, Export kWh, kVAh, Net kWh, kVAh, V , I, kW, 12 months history of Energy, load survey, avg frequency, TOD, Tamper detection & logging, Power On/Off Events, Instantaneous parameters with display in absence of power complete all as specified and directed.Make : HPL item code H0PB3828141100MSOC. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
