|
| 1 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. and removal of debris outside MD land complete all as specified and as directed. |
| 2 | M&L Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20 mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes etc complete all as specified and as directed. |
| 3 | M&L Machine cut kota stone slab flooring 18-20 mm thick laid in patches and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20 mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes etc including demolition of existing stone slab. complete all as specified and as directed. |
| 4 | S&F 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 5 | S&F Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 6 | Repairs to leaking water in CP pillar tap, stop cock, angle valve, bib taps of any description by replacing the washer etc complete all as specified and directed by Engr-in-charge. |
| 7 | Repair to leaking of pipes /fittings with M-Seal at any height and in any position complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F Phase for 15mm brass or CP brass stop cocks, bib taps .,wall, sink and wash basin mixer etc, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 9 | S&F Ball valve PVC for PVC 15mm bore for low level flushing cistern, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 10 | S&F PVC handle/ push button including lever for low level flushing cistern, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 11 | Repair/Adjustment to washer /siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug and making it functional complete all as specified and directed by Engr-in-charge. |
| 12 | S&F Siphon for low level flushing cistern of any type and make of cistern fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 13 | S&F Small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, Reducer,sockets, union, tank nipple,water meter coupling etc for 15mm bore pipe fixed in repairs complete (Larger bore shall taken into account) complete all as specified and directed by Engr-in-charge. |
| 14 | S&F Small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, Reducer,sockets, union, tank nipple, water meter coupling etc for 20mm bore pipe fixed in repairs complete (Larger bore shall taken into account) complete all as specified and directed by Engr-in-charge. |
| 15 | S&F Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including 100mm CI 'P' or 'S' trap set in and including concrete fixed in repair complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F Waste coupling of brass Chromium plated (half or full threaded) 32 mm bore for sink fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 17 | S&F Waste coupling of brass Chromium plated (half or full threaded) 40 mm bore for sink fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 18 | S&F Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 600 x 450mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 19 | Taking down and Re-fixing of Plate rack/WHB/Cistern/Sink of any description and any size in repairs complete all as specified directed by Engr-in-charge. |
| 20 | S&F Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 21 | S&F Aluminum, anodized, barrel tower bolts of extruded section 200 mm long, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 22 | S&F Stain less steel sliding door bolt 300mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of SS, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 23 | S&F Butt hinges medium weight, cold rolled mild steel 100mm size, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 24 | S&F Hasp and staple 125mm size, safety type, aluminium anodised including bolt to hinge plate, fixed in repairs with screws complete all as specified and directed by Engr-in-charge. |
| 25 | S&F 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 26 | S&F in repair floor door stopper of Aluminium alloy body and tongue, anodised 125mm size with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-charge. |
| 27 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-charge. |
| 28 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete all as specified and directed by Engr-in-charge. |
| 29 | S&F sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 30 | S&F figured Glass Sheet 4 mm thick pinhead , glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 31 | M&L for Welding at site in repairs exceeding 2.5 cm but not exceeding 5 cm in length & thickness of metal to be welded n.exc 6 mm thick complete all as specified and directed. |
| 32 | S&F in repair Stain less steel in premium quality Peg set of Six & fixing it with screws complete all as specified and directed. |
| 33 | S&F Door seal strip of plastic beading with bush not exceeding 1.20 mtr length fixed in repair complete all as specified and directed by Engr-in-charge. |
| 34 | S&F mortice lock, vertical type size 100 mm brass 6 lever in repair complete all as specified and directed by Engr-in-charge. |
| 35 | S&F 20 mm dia SS drapery rod in reapir including all fittings like finel,brackets,holders etc complete all as specified and directed by Engr-in-charge. |
| 36 | M&L for Filling of white or coloured cement to match the colour of tile in hungry joints of glazed tiles/kota stone flooring each complete all as specified and directed by Engr-in-charge. |
| 37 | Demolition of lime concrete / lean concrete /Brick bats etc. from sunken slab portion exc. 15 cm thick but above ground floors, including removal of demolished material from MD land debrish away from site to a designated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. |
| 38 | M&L lean concrete type E-2 (1:5:10) using 40mm bricks bats aggregate as in sunken portion complete all as specified and directed by Engineer-in-charge. |
| 39 | M&L for 40mm GI medium grade Spout pipe for sunken work complete all as specified and directed by Engineer-in-charge. |
| 40 | M&L for providing water proofing tratment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make asapproval in Technical Instruction 5/2003 by adding: (a) 15mm thick plaster (1:4) cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall / beam , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allwed to dry. (Note: Water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @0.5 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.25 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @0.25 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.15 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs. complete all as specified and directed by Engineer-in-charge.NOTE : Floor area of the sunken slab shall be measured only.Make of Acrylic based polymer modified cementitious compound -Fosroc ( Brushbond) /Sika (Sikatop-100) /Pidilite. |
| 41 | Supply only water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, complete all as specified and directed by Engr-in-charge. |
| 43 | All as per item No. 42 here-in-before but 75 mm dia |
| 44 | Fixing only in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge. |
| 45 | Fixing only in repair 75 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repair 100 mm cast iron bends complete all as specified and directed by Engineer-in-charge. |
| 47 | All as per item No. 46 here-in-before but 75 mm dia |
| 48 | S&F in repair Branch pieces, single (equal or unequal),ordinary or inverted(spigot or socket type)or with parallelbranches 100 mm dia complete all as specified and directed by Engr-in-charge. |
| 49 | S&F in repair Branch pieces, single (equal or unequal),ordinary or inverted(spigot or socket type)or with parallelbranches 75 mm dia complete all as specified and directed by Engr-in-charge. |
| 50 | S&F in repairs 75 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-charge. |
| 51 | S&F in repairs 100 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-charge. |
| 52 | Fixing only in repair 100 mm cast iron bends/Tee/cowls after necessary cleaning complete all as specified and directed by Engineer-in-charge. |
| 53 | All as per item No. 52 here-in-before but 75 mm dia. |
| 54 | M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar having superficial area not exceed 150 Sqcm each. making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed by Engineer-in-charge. |
| 55 | Cutting of bushes /piple small tree protuding over wall survace/Roof surface/terrace of building of height upto up to 10.0 mtr. Including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site , complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed by Engr-in-charge. |
| 57 | S&F in repair for 110mm PVC (SWR) T equal and unequal complete all as specified and directed by Engineer-in-charge. |
| 58 | S&F in repair for 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 59 | S&F in repair PVC (SWR) pipes 75mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed by Engr-in-charge. |
| 60 | S&F in repair for 75 mm PVC (SWR) T equal and unequal complete all as specified and directed by Engineer-in-charge. |
| 61 | S&F in repair for 75 mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 62 | Taking up or down GI steel/ Kitek tubing 15 mm with connections or fittings from wall, ceiling, floor etc complete all as specified and directed by Engineer-in-charge. |
| 63 | Taking up or down GI steel/ Kitek tubing 20 mm with connections or fittings from wall, ceiling, floor etc |
| 64 | S&F GI water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-charge. |
| 65 | Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor or fixed to wall complete all as specified and directed by Engineer-in-charge. |
| 66 | S&F GI water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-charge. |
| 67 | Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling complete all as specified and directed by Engineer-in-charge. |
| 68 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 10cm but n exc 20 cm girth complete all as specified and directed by Engineer-in-charge. |
| 69 | Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc, complete all as specified and directed by Engr-in-Charge. |
| 70 | M&L for Rendering 15mm thick in Cement Mortar 1:4 on brick work, concrete, R.C.C. Surfaces on mumty, parapet or similar surfaces at any height finished even and fair without using extra cement of ,up to height 12 metre, complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L Rendering 15mm thick on brick surfaces of wall in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-In-Charge. . |
| 73 | M&L preparation of old/new plaster surfaces and applying two coat of oil bound distemper over 2mm tick wall care putty white or tinted complete, all as specified and directed by Engr-in-Charge |
| 74 | M&L for preparation of new plaster/un treated surface of wall / coloum ,beam , chajja etc. and finish the surface with 2mm thick water proof wall care putty and making smooth by using sand paper applying two coat of exterior acrylic emulsion (weather proof treatment) , to be applied using an airless spray machine, complete all as manufacturer,s instruction and as directed. |
| 75 | M&L prepration of new surface of ceiling and applying two coat of oil bound distemper over 2mm tick wall care putty white or tinted complete all as specifeid and directed by Engr-in-Charge |
| 76 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified directed. |
| 77 | M&L for Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick, in vertical surface such in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete & including rendering 10 mm thick in cement mortar 1:4 on brick walls for laying tiles complete all as specified and directed by Engr-in-charge. |
| 78 | M&l for non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed for floor finishes in Cement Mortar 1:4 complete all as specified. |
| 79 | M&L for vitrified tiles light shade 8 to10mm thick (square/rectangular) polished area of each tile 600mm x 600mm / 605mm x 605mm over and including 15mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 80 | M&L for super gloss finished/carving (PGVT) tiles external/Internal in vertical surfaces 600mm x 1200mmx 8 to 10mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry or tile adhesive and pointed in white or coloured cement to match including dismantling existing tile and removing the debris outside the defence land complete all as specified and as directed. |
| 81 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 thick screed bed in Cement Mortar 1:6 and dismantling of existing tiles complete all as specified and directed by Engr-in-charge. Make : Orient ceramic/ H&R Johnson/ Kajaria etc. |
| 82 | S&F in repair of vitreous china One piece EWC standard size wall hanging/floor mounted white/ivory colour with dual flusing cistern white including CI \\"P\\" or \\"S\\" trap, fixed as complete all as specified and directed.Make : Parryware/ Cera/ Jaguar etc. |
| 83 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including connection to drain and flushing pipe antisyphonic pipes etc complete all as specified and directed. |
| 84 | S&F in repairs PVC syphonic action type flushing cistern 10 lts capacity ,low level with inlet ,ball valve float and bracket with complete fitting complete all as specified and directed. |
| 85 | S&F in repairs 15 mm fancy type Stop valves cast copper alloy chromium plated with long shank and Cup ( Concealed Type) screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specified and directed. |
| 86 | S&F in repairs 15 mm fancy type Stop valves (angle valves) cast copper alloy screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specified and directed. |
| 87 | S&F in repairs 15 mm Bib taps long body (Fancy type) cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair complete all as specified and directed. |
| 88 | S&F in repairs Bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 89 | S&F in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwed down for iron pipes for complete all as specified and directed. |
| 90 | S&F in repairs 15 mm brass chromium plated centre hole WHB mixer for mixing Hot and Cold water screwed down for iron pipes. |
| 91 | S&F in repairs Vitreous china wash hand basin ,flat back size 550 mm X 400 mm including Bracket cutting in wall and pinning in ends of bracket or erecting stand with PCC 1:2:4 Type B1, including waste coupling and waste pipes complete all as specified and directed. |
| 92 | S&F PVC connection 15 mm size with PTMT nuts of lengh 450 mm long complete all as specified and directed. |
| 93 | S&F in repairs 15 mm dia Fancy type Pillar Taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered Hot and Cold with long screwed complete all as specified and directed by Engr-in -Charge. |
| 94 | S&F in repairs health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 metre length complete all as directed by Engr-in -Charge. |
| 95 | S&F Flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 96 | S&F in repairs Plastic water closed seat cover as per site requirement with flat bottom ,and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 97 | S&F in repairs Chromium plated shower roses swivel shower brass chromium plated with arm 100 mm size for fixing with 15 mm pipes with swivel joints, any size including fixing to steel pipes or union complete all as specified and directed. |
| 98 | S&F Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 99 | S&F PVC Bath Room cabinet (size-300x450mm) with looking mirror & shelves fixed in repair complete all as specified and directed by Engr-in-charge. |
| 100 | S&F Grating doom 100 mm dia with or without or without waste hole of chromium plated fixed on floor/nahani trap with cement mortar, fixed in repairs complete. complete all as specified and directed by Engr-in-charge. |
| 101 | S&F in repairs PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 102 | All as per Item no. 101 here-in- before but 40mm dia for sink |
| 103 | Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (Below or above ground level) complete removing out site of defence land, complete all as specified and directed.by Engr-in-charge. |
| 104 | M&L for Plain cement concrete 1:2:4 type B-1, 100 mm thick (20 mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement including necessary form work complete all as specified and as directed. |
| 105 | M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in plinth protection, complete all as specified and directed by Engineer- in-charge. |
| 106 | M&L for heavy duty, exterior grade tile (Durastone of Somany/ Endura of Jhonson /orient bell as approved by GE) of any size 10mm thick, as in floor (in trades, landing etc), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) including dismantling / demolition of old tiles and rubbish off the primises etc complete all as specified and directed. |
| 107 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc., complete including removing the waste materials to a distance of 500 meters complete all as specified and directed by Engr-in-Charge. |
| 108 | M&L Brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius in cement mortar 1:4 for working height up 03 storeyed building complete all as specified and directed by Engr-in-Charge. |
| 109 | All as per item no.108 here in before but except bricks. |
| 110 | Demolition of RCC Jallies/trellis work (Jafri), including taking as under of battens in trellis complete all as specified and as directed. |
| 111 | M&L for Providing precast cement concrete Type B0 1:2:4 (12.5 mm graded cushed stone aggregate) as in louvres and jallies, 40 mm thick and Set in Cement Mortar 1:6 and including applying two coat of Cement base paint complete all as specified and as directed. |
| 112 | S&F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with threaded close top), HDPE, triple layered white colour with ISI marked of 500 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre complete all as specified and directed. |
| 113 | S&F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with threaded close top), HDPE, triple layered white colour with ISI marked of 1000 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position including dismantling existing water storage tanks (RCC/PVC) of capacity upto 1000 litre complete all as specified and directed. |
| 114 | S&F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with threaded close top), HDPE, triple layered white colour with ISI marked of 2000 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position including dismantling existing water storage tanks (RCC/PVC) of capacity upto 2000 litre complete all as specified and directed. |
| 115 | S&F in repairs Ball valves high pressure PTMT ISI marked, with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gm) fixed in repair complete all as specified and directed by Engr-in-Charge. |
| 116 | S&F in repairs Ball valves high pressure PTMT ISI marked, with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe of 20mm bore (minimum weight 210gm) fixed in repair complete all as specified and directed by Engr in Charge. |
| 117 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 15 mm bore screwed both end for iron pipe, and fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 20 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&F sinks with drainage board made of stainless steel 0 .8mm thick kitchen or laboratory with plugs, washers and cp waste coupling and 40 mm PVC waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm ,thickness 3-4mm,500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 120 | S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings ,nut/ bolts complete all as specified and directed by Engineer-in-Charge. |
| 121 | Cleaning of terrace/loft water storage tank (inside surface area) up to 1000 litre capacity, at all heights, including removal of silt, sludge and rubbish from the tank, scrubbing of internal surfaces using coconut brushes, duster, etc., washing with fresh water and disinfecting with bleaching powder @ 0.5 gm per litre capacity of tank.The item includes marking the date of cleaning on the outer surface of tank body using stencil and paint, complete as per direction of Engineer-in-Charge.Note: (i)Old dates already marked shall be removed using paint remover or black paint before marking new date. If date is not marked or old date not removed, recovery shall be made @ Rs. 0.10 per litre.(ii)During cleaning, any damage caused to GI fittings, ball cock, etc., shall be repaired/replaced by the contractor at his own cost, and nothing extra shall be paid on this account.(iii)The item also includes disposal of all malba/debris outside the premises as directed. |
| 122 | Cleaning of terrace/loft water storage tank (inside surface area) exc 1000 ltr and n.exc 2000 litre capacity, at all heights, including removal of silt, sludge and rubbish from the tank, scrubbing of internal surfaces using coconut brushes, duster, etc., washing with fresh water and disinfecting with bleaching powder @ 0.5 gm per litre capacity of tank.The item includes marking the date of cleaning on the outer surface of tank body using stencil and paint, complete as per direction of Engineer-in-Charge.Note: (i) Old dates already marked shall be removed using paint remover or black paint before marking new date. If date is not marked or old date not removed, recovery shall be made @ Rs. 0.10 per litre.(ii) During cleaning, any damage caused to GI fittings, ball cock, etc., shall be repaired/replaced by the contractor at his own cost, and nothing extra shall be paid on this account.(iii) The item also includes disposal of all malba/debris outside the premises as directed. |
| 123 | S&F for Providing Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) JALI of required size comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made fiom Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kglcbm an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000N(Face) & ll00N (Edge),Minimum Compissive of 50 N/mm2,Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC Jali to be fixed with stainless Steel butt hinges ( if required ) of required size with neoessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company incl.demo of existing RCC Jali and make disturbed surface smooth by rendering to fix WPC JALI. Make : M/s Rajshri or Equivalent approved by any command/ ADa. |
| 124 | Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimney and similar suspended work at any height complete all as specified and directed by Engineer-in-Charge. |
| 125 | M&L Formwork to chullah hoods, chajjas,facia, troughs and similar, items in cluding edges, including stagging and scafolding up to 10 mtr heights, complete all as specified and directed by Engr-in-Charge. |
| 126 | M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height, complete all as specified and directed by Engr in Charge. |
| 127 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr in Charge. |
| 128 | M&L for Mild Steel work as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , fixed with using dead fastern of 150mm long or welding etc, including distance pieces, cleats conforming to Fe 410.0 or Fe 310.0 etc complete all as specified and directed by Engr in Charge. |
| 129 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 130 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 131 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement adhesive etc complete all as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries. |
| 132 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE. |
| 133 | Supply and fixing of UPVC door/windows two/ three track, sliding/openable type in any position with 6mm thick toughened glass of approved make (glass tint as approved by GE) with chowkhat if required incl all necessary fittings and fixtures and as directed by Engr-in-Charge. Make : Finesta, Lingel, Adopen, Encraft. |
| 134 | Supply and Fix, Aluminium anodised, barrel tower bolts 150 mm long, powder coated, of extruded section and fixed, complete all as specified and directed. |
| 135 | Supply and fix, butt hinges, 100mm long, extruded aluminium alloy with galvanised stain less steel hinge pin, complete all as specified and directed. |
| 136 | S&F Aluminium handles, cast type, anodised 100mm in size fixed with screws complete all as specified and directed. |
| 137 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with belding or necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 138 | S&F factory made 18mm thick solid WPC (wood polymer composite) board of density 600kg/cum of one side laminated with coloured lamination and other side balancing lamination, as in cupboards/kitchen/ cabinet shutter/ drawers etc fixed with screws, sovent cement, adhesive including dismantling old existing board complete all as specified & directed . Make. RAJSHRI/ ECOCELL or Equivalent Note:- coloured approved by Engr-in-charge. |
| 139 | S&F for continuos piano hinges, mild steel bright finish width of flap 40mm, fixed as in repair complete all as specified and as directed. |
| 140 | S&F 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screwsetc complete all as specified and directed. |
| 141 | M&L for PVC Lipping 3 to4 mm thick fixed to 18/19mm board with nails/adhesive complete all as specified and directed. |
| 142 | M&L for fixing 12mm thick false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns BIS product Confirming to IS 2095 Part 3:2022, having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4)-1970 and light reflectance of 90% (minimum) to be laid and including in true horizontal level suspended on inter-locking metal Powder Coated T-Grid of hot dipped galvanized iron section of 0.33mm thick on Silhouette Profile, rotary stitched single webbed white with 6mm reveal profile (Black), comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners/(Screw holding in same size for trusses, rafter and purlins etc), 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 20x20x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. including taking down existing ceiling. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.Make : Diamond brand TM/ Dexune/ Everest/ Arm strong ceiling. |
| 143 | M&L for Rough cast plaster After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed, including taking down cement plaster of any layer up to masonry work and racking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.Note :- WPC shall be measured and paid separetely. |
| 144 | S&F in repair 15 mm fancy type (two way angle valves) cast copper alloy screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-Charge. |
| 145 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (any shape) 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 146 | M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 147 | M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 148 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet (any shape) 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 149 | Note :- Amount of credit of Rs. 37738.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
