Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :, 250 mm dia (wall thickness 6.3 mm)DSR 2022 E-M- 18.7.1 |
| 2 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required., Group CDSR 2022 E-M- 1.54.3 |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.DSR 2022 E-M- 1.5 |
| 4 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 A switchDSR 2022 E-M- 1.24.1 |
| 5 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 15/16 A switchDSR 2022 E-M- 1.24.3 |
| 6 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 3 pin 5/6 A socket outletDSR 2022 E-M- 1.24.4 |
| 7 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 6 pin 15/16 A socket outletDSR 2022 E-M- 1.24.5 |
| 8 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required., 3 run of cableDSR 2022 E-M- 1.53.3 |
| 9 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 2022 E-M- 1.26 |
| 10 | Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required., 1 or 2 Module (75mmX75mm)DSR 2022 E-M- 1.27.1 |
| 11 | Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required., 6 Module (200mmX75mm)DSR 2022 E-M- 1.27.4 |
| 12 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wireDSR 2022 E-M- 1.7.1 |
| 13 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 2 X 2.5 sq. mm + 1X2.5 sq. mm earth wireDSR 2022 E-M- 1.7.2 |
| 14 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 2 X 4 sq. mm + 1 X 4 sq. mm earth wireDSR 2022 E-M- 1.7.3 |
| 15 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 2 X 6 sq. mm + 1 X 6 sq. mm earth wireDSR 2022 E-M- 1.7.4 |
| 16 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 4 X 10 sq. mm + 2 X 6 sq. mm earth wireDSR 2022 E-M- 1.7.10 |
| 17 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required., 4 X 16 sq. mm + 2 X 6 sq. mm earth wireDSR 2022 E-M- 1.7.11 |
| 18 | Providing, fixing, testing and commissioning of Ductable split air-conditioning unit suitable to operate from 415+10% volt, 50 Hz, 3 phase power supply, with air-cooled evaporator with coil, R-410 refrigerant, fan, and fan motor, air-cooled condenser with hermetically sealed scroll compressor condenser coil, propeller fans controls, inter connection control panel, full charged refrierant Including control wiring. only Raw power will be provided by other agency near the outdoor units, necessary power cable with isolator, M.S. frame duly painted to locate Outdoor Unit. Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. The capacity guarantee should be ensured by the vendor , Capacity: 8.5 TR, 3400 cfm0 |
| 19 | Supply,installation,testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft /hard drawn copper refrigerant piping for ductable system , complete with fittings , with suitable adjustable ring type hanger supports , jointing /brazing including accessories , insulated with XLPE /class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as a given below for suction and liquid lines , all accessories as per specifications etc as required . 28.5 mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19 mm thick insulation- MR.26 |
| 20 | Supply,installation,testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft /hard drawn copper refrigerant piping for ductable system , complete with fittings , with suitable adjustable ring type hanger supports , jointing /brazing including accessories , insulated with XLPE /class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as a given below for suction and liquid lines , all accessories as per specifications etc as required . 19 mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19 mm thick insulation- MR.78 |
| 21 | Supply,installation,testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft /hard drawn copper refrigerant piping for ductable system , complete with fittings , with suitable adjustable ring type hanger supports , jointing /brazing including accessories , insulated with XLPE /class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as a given below for suction and liquid lines , all accessories as per specifications etc as required . 15.86 mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19 mm thick insulation- MR 458 |
| 22 | Supply,installation,testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft /hard drawn copper refrigerant piping for ductable system , complete with fittings , with suitable adjustable ring type hanger supports , jointing /brazing including accessories , insulated with XLPE /class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as a given below for suction and liquid lines , all accessories as per specifications etc as required . 12.7 mm dia (OD) (Softdrawn) with tube thickness 1.2mm with 19 mm thick insulation- MR.785 |
| 23 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:, G.S. SheetDSR 2023- 15.28.1 |
| 24 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required., 3-1/2 X 35 sq. mm (32mm)DSR 2022 E-M- 9.1.21 |
| 25 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required., 3-1/2 X 50 sq. mm (35mm)DSR 2022 E-M- 9.1.22 |
| 26 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required., 3-1/2 X 70 sq. mm (38mm)DSR 2022 E-M- 9.1.23 |
| 27 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.DSR 2022 E-M- 2.11 |
| 28 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required., Single poleDSR 2022 E-M- 2.10.1 |
| 29 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required., 63 ADSR 2022 E-M- 2.13.2 |
| 30 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required., 100 ADSR 2022 E-M- 2.13.3 |
| 31 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator), 8 way (4 + 24), Double doorDSR 2022 E-M- 2.4.3 |
| 32 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required., 40 ADSR 2022 E-M- 2.14.2 |
| 33 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required., 63 ADSR 2022 E-M- 2.14.3 |
| 34 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., TV antenna socket outletDSR 2022 E-M- 1.24.7 |
| 35 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022 E-M- 1.19 |
| 36 | Supply and installation of fire retardant duct thermal Insulation from inside duly from factory (13 mm thick) applied with SR 505. 13 mm thick, 24 kg/m3- MR.10 |
| 37 | Supply & installation of duct acoustic lining with fibre glass insulation of density 32 kg/m3 covered with 26 Ga perforated Al. sheet with nuts and bolts complete as per standards, requirement and drawings. 15 mm Thick- MR.50 |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantileversDSR 2023- 5.9.5 |
| 39 | 12 mm cement plaster of mix :, 1:6 (1 cement: 6 fine sand)DSR 2023- 13.1.2 |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR 2023- 4.1.2 |
| 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete., Size of Tile 600x600 mmDSR 2023- 11.41.2 |
| 42 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600x20500 |
| 43 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600x17500 |
| 44 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600x16500 |
| 45 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600x4500 |
| 46 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600x450 Fluted glass0 |
| 47 | Providing, supplying and laying 20mm thick heavy-duty rubber floor tiles of approved make, colour and pattern, laid over prepared sub-floor, including surface cleaning, application of approved adhesive, proper alignment, cutting, edge finishing, rolling/pressing to ensure firm bonding, and complete installation as per manufacturer’s specification and direction of Engineer-in-charge, including all materials, labour, tools and incidentals complete. SIZE OF 508X508MM,IS:3400, IS:1237 approved sbr rubber crumb with polymerically bonded. Material Specifications: • Thickness: 20 mm • Type: Anti-skid rubber tiles (gym / play area grade) • Density: High density shock-absorbing rubber • Finish: Matte / textured anti-slip surface • Adhesive: Recommended rubber flooring adhesive- F.1 |
| 48 | Providing, supplying and laying 10mm thick heavy-duty rubber floor roll of approved make, colour and pattern, laid over prepared sub-floor, including surface cleaning, application of approved adhesive, proper alignment, cutting, edge finishing, rolling/pressing to ensure firm bonding, and complete installation as per manufacturer’s specification and direction of Engineer-in-charge, including all materials, labour, tools and incidentals complete. IS:3400, IS:1237 approved sbr rubber crumb with polymerically bonded. Material Specifications: • Thickness: 10 mm • Type: Anti-skid rubber tiles (gym / play area grade) • Density: High density shock-absorbing rubber • Finish: Matte / textured anti-slip surface • Adhesive: Recommended rubber flooring adhesive- F.2 |
| 49 | Supply, Installation, Testing and Commissioning of Pendant luminaire with HE-High Efficiency LED (Light Emitting Diode) system power: 26W, luminous flux of luminaire 2080lm, colour temperature of 4000K, Neutral white, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light emission, curved luminaire profile in Anodized aluminium, Prismatic diffuser for uniform illumination, Electronic control gear AS PER GIVEN DESIGN-L1 (3 YEARS WARRENTY) WIPRO LED MODULE- 4000K |
| 50 | Supply, Testing and Commissioning of Pendant luminaire with HE-High Efficiency LED (Light Emitting Diode) system power: 26W, luminous flux of luminaire 2080lm, colour temperature of 4000K, Neutral white, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light emission, curved luminaire profile in Anodized aluminium, Prismatic diffuser for uniform illumination, Electronic control gear AS PER GIVEN DESIGN-L2(3 YEARS WARRENTY) WIPRO LED MODULE- led/2 |
| 51 | Supply, Testing and Commissioning of Pendant luminaire with HE-High Efficiency LED (Light Emitting Diode) system power: 26W, luminous flux of luminaire 2080lm, colour temperature of 4000K, Neutral white, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light emission, curved luminaire profile in Anodized aluminium, Prismatic diffuser for uniform illumination, Electronic control gear AS PER GIVEN DESIGN-L3 (3 YEARS WARRENTY) WIPRO LED MODULE- led/3 |
| 52 | Supply, Testing and Commissioning of Pendant luminaire with HE-High Efficiency LED (Light Emitting Diode) system power: 26W, luminous flux of luminaire 2080lm, colour temperature of 4000K, Neutral white, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light emission, curved luminaire profile in Anodized aluminium, Prismatic diffuser for uniform illumination, Electronic control gear AS PER GIVEN DESIGN-L4,L5 (3 YEARS WARRENTY) WIPRO LED MODULE- led/4 |
| 53 | Providing and fixing recessed/surface/suspended aluminium LED profile light complete with LED strip (warm white/cool white), diffuser cover, end caps, driver, connectors, wiring and fixing accessories, including cutting in false ceiling/wall and making connections complete as per CPWD specifications and direction of Engineer-in-Charge. Protection Class II, IP20, THD88%, Surge proetction of 2.5kV (3 YEARS WARRENTY) WIPRO LED MODULE- led/58 |
| 54 | SQUARE CELL CEILING LIGHT(ARCHITECTURAL 20W BLACK SURFACE CYLINDRICAL LIGHT WITH ROS GOLD REFLECTOR- reflector |
| 55 | Supply, installation, testing and commisioning of conventional type smoke detector with base. Blinking in normal conditions, still on smoke sensing condition.- smoke sen |
| 56 | Supplying, installation, testing & commissioning of response indicator on surface/recessed ABS Box having two LED, metallic cover complete with all connections etc as required.- 17.2.5 |
| 57 | SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.- mr.48 |
| 58 | FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL), Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic, Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (includin, Supplying, installation, testing & commissioning of addressable phone control module complete as required.DSR 2022 E-M- 17.2.11 |
| 59 | SITC of UL268 10th edition compliance and FM approved Intelligent Addressable Duct detector with 10ft sampling pipe (optical and thermal sensors) complete with standard base, facility to mount in different comprehensive environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost.- MR.54 |
| 60 | SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Manual Pull Station Single Action, Shock and Vibration Resistant, with built in dual isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED for activation), T-45 Key Reset lockset for easy maintenance, Operating Temp and RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every MCP to comply the same without any extra cost.- Mr2.25 |
| 61 | Supplying, installation, testing & commissioning of One controller supports 2 zones, expandable up-to 8 ZONE with 2-zone routers, Control and routing of 4 simultaneous audio channels,EN 54-16 system certification- MR.56 |
| 62 | SITC of Call station with soft touch button 15 freely programmable buttons,Customization via built-in display and keys, Provision for installing emergency button and key switch,EN 54-16 system certification etc all required-235 |
| 63 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required-145 |
| 64 | Supplying, installation, testing & commissioning of Power amplifier, 240W,Multiple outputs - 70 V / 100 V and 8/4 ohm, Temperature controlled forced front to back ventilation, directly stackable, Mains, battery back-up, and pilot tone supervision, Dual inputs with priority switching complete as required.- na.2 |
| 65 | FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL), Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic, Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (includin, Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & ERLS outer sheath complete as required. Supplying and drawing of cable FireDSR 2022 E-M- 17.4.3 |
| 66 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Supplying and Laying of 2x1.5sqmm FS unarmourd cable- MR/845 |
| 67 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.- 17.5.4 |
| 68 | Supplying & Fixing of battery operated illiminated \\"EXIT\\" signage, with 2hrs power Battery backup complete as required.- MRS2.3 |
| 69 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia- 18.7.1 |
| 70 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :, 32 mm diaDSR 2022 E-M- 18.7.2 |
| 71 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :, 40 mm diaDSR 2022 E-M- 18.7.3 |
| 72 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :, 50 mm diaDSR 2022 E-M- 18.7.4 |
| 73 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :, 65 mm diaDSR 2022 E-M- 18.7.5 |
| 74 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :, 80 mm diaDSR 2022 E-M- 18.7.6 |
| 75 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :, 80 mm diaDSR 2022 E-M- 18.11.4 |
| 76 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :, Pendent SprinklerDSR 2022 E-M- 18.21.1 |
| 77 | Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.DSR 2022 E-M- 18.29 |
| 78 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required., 1000mmDSR 2022 E-M- 18.25.2 |
| 79 | Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.SOR 2018 (E-M)- 11.1132 |
| 80 | Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.SOR 2018 (E-M)- 11.1131 (A) |
| 81 | Providing and fixing logo & signage in 3D as per the approved Design/pattern with mat/gloss finish Brass letters with Mettalic/ Acrylic Base, complete as required at site with the direction of the Engineer in charge- 21258.mr |
| 82 | Providing, supplying, installation, testing & commissioning of complete PA audio system comprising Harman Hi-Tune 60W amplifier with Bluetooth & USB support, Harman series 10W ceiling mount speakers (white colour), including transparent flat speaker cable, connectors, mounting accessories, fixing on ceiling, wiring, termination, and complete system testing & commissioning as per manufacturer specifications and direction of Engineer-in-Charge.- MR.554 |
| 83 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.DSR 2023- 13.78 |
| 84 | Cell ceiling system: Providing, fabricating and fixing open cell / open grid false ceiling system made of aluminium / GI cells of approved size, module and depth, factory finished in powder coating of approved colour and shade, including main runners, cross runners, suspension system with GI threaded rods, cleats, anchor fasteners, perimeter wall angles, cutting, alignment and complete installation at all heights as per approved drawings and direction of Engineer-in-charge. Material Specifications: • Material: Aluminium / GI open cell grid • Cell Size: As per approved design (e.g., 50x50mm / 75x75mm / 100x100mm) • Depth: As specified in drawings • Finish: Powder coated (black / white / custom colour) • Suspension: GI threaded rods with anchor fasteners • Accessories: Perimeter trims, connectors, fixing clips etc.-12.47 |
| 85 | Aluminium Waffle Ceiling (Wooden Finish) Item: Providing & Fixing Aluminium Waffle Ceiling in Wooden Finish Description: Providing, fabricating and fixing aluminium waffle / open grid ceiling system made from extruded aluminium sections of approved size and spacing, finished in wood grain / wooden finish powder coating / sublimation coating, including suspension system with GI hangers, threaded rods, cleats, anchor fasteners, perimeter channels, cutting, fitting, alignment and complete installation at all heights as per drawings and direction of Engineer-in-charge. Material Specifications: • Material: Extruded Aluminium sections • Finish: Wooden finish (powder coated / sublimation) • Grid Size/Module: As per approved shop drawing • Suspension: GI threaded rods with anchor fasteners • Accessories: Perimeter trims, cleats, connectors etc.- A.3 |
| 86 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete., Hot finished welded type tubes.DSR 2023- 10.16.1 |
| 87 | Storage Unit with laminate finish, 525mm deep, Fabricating and fixing as per details. Top, bottom and shelves to be made out of 19mm thick board with maple wood lipping. Back to provided of 6mm thick commercial ply with 1 mm thick Acrylic laminate on exterior face and all internal suface to be faced with 0.8mm thick laminate of approved shade. Complete with all necessary fitting like hinges, ball cathers, tower bolt,. 2600 X 850- C.1 |
| 88 | Storage Unit with laminate finish, 525mm deep, Fabricating and fixing as per details. Top, bottom and shelves to be made out of 19mm thick board with maple wood lipping. Back to provided of 6mm thick commercial ply with 1 mm thick Acrylic laminate on exterior face and all internal suface to be faced with 0.8mm thick laminate of approved shade. Complete with all necessary fitting like hinges, ball cathers, tower bolt,. 2600 X 425- C3. Nos DSR |
| 89 | Storage Unit with laminate finish, 525mm deep, Fabricating and fixing as per details. Top, bottom and shelves to be made out of 19mm thick board with maple wood lipping. Back to provided of 6mm thick commercial ply with 1 mm thick Acrylic laminate on exterior face and all internal suface to be faced with 0.8mm thick laminate of approved shade. Complete with all necessary fitting like hinges, ball cathers, tower bolt,. 2600 X 350- C2 Non DSr. |
| 90 | Storage Unit with laminate finish, 525mm deep, Fabricating and fixing as per details. Top, bottom and shelves to be made out of 19mm thick board with maple wood lipping. Back to provided of 6mm thick commercial ply with 1 mm thick Acrylic laminate on exterior face and all internal suface to be faced with 0.8mm thick laminate of approved shade. Complete with all necessary fitting like hinges, ball cathers, tower bolt,. 2600 X 525- C4 Non dsr |
| 91 | PRINTED WALL PAPER:Providing, supplying and pasting digitally printed / vinyl printed wallpaper of approved design, shade and pattern on prepared wall surface, including surface preparation, putty finishing, primer coat, application of suitable adhesive, proper alignment of pattern, edge trimming, joint finishing and complete installation as per manufacturer’s specification and direction of Engineer-in-charge. Material Specifications: • Type: Vinyl / Non-woven / Custom digital printed wallpaper • Thickness: As per approved make • Finish: Matte / Satin / Textured (as approved) • Adhesive: Recommended wallpaper adhesive of approved make- D. NON DSR |
| 92 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600X1500- E.1/NON |
| 93 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600X1000- E.2/ NON |
| 94 | MIRROR WORK: roviding, supplying and fixing 6mm thick approved make float glass mirror of best quality, distortion free, machine polished edges with copper-free protective backing, fixed over 12mm thick waterproof ply / PVC foam board back lid, complete with 16mm x 16mm powder coated / anodized aluminium frame, mitred corners, fixed to wall with SS screws, rawl plugs and neutral silicone adhesive, including all materials, labour, cutting, polishing, framing, transportation, installation and all incidental works complete as per drawings and direction of Engineer-in-charge. 2600X8500 |
| 95 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required., 450 mm width X 50 mm depth X 2.0 mm thicknessDSR 2022 E-M- 4.1.6 |
| 96 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 2022 E-M- 5.6 |
| 97 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.DSR 2022 E-M- 5.14 |
| 98 | Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required.DSR 2022 E-M- 5.15 |
| 99 | Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing as required.DSR 2022 E-M- 5.16 |
| 100 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.DSR 2022 E-M- 2.21 |
| 101 | Supply, Installation, Testing and Commisioning of USB charger- 3000mA/15 Watts- Type C- 1 module complete in all respect- MR 20.0 |
| 102 | Floor Panels Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, powder coated painting and marking as specified. Switch boards complete as per schematic diagram: Type of construction: Form 3 IP classification: 42 The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in the Specifications Colour: Gray Powder Coated, as per approved sample. Incomings: 1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect Bus Bars: TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec. Outgoings: (a) 63 Amps, TPN, MCB - 4 Nos. (b) 40 Amps, TPN, MCB - 6 nos Panel complete as above- FLOOR PANELS |
| 103 | Supplying, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in Thickness 0.63 mm sheet- 16.12.1.1 |
| 104 | Supplying, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in Thickness 0.80 mm sheet- 16.12.1.2 |
| 105 | Supplying, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in Thickness 1.00 mm sheet- 16.12.1.3 |
| 106 | Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.DSR 2022 E-M- 16.15 |
| 107 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.DSR 2022 E-M- 16.17 |
| 108 | Volume Control Damper (Duct Damper) Supply & installation of extruded aluminium volume control damper with blades, adjustable lever, frame etc. as per specifications and drawings.- MR.458 |
| 109 | Canvas Connection- MR.320 |
| 110 | Collar Damper Supply, installation, testing and commissioning of Alu. Collar Damper (supply vents only)- MR.32 |
| 111 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge., Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)DSR 2023- 15.2.1 |
| 112 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)DSR 2023- 5.1.2 |
| 113 | 2 PART FIX 50 X 73 WITH MOTORISED BLIND SIZE:2100 mm x 2600 mm C 50 Colours: Akzonobel 1000 Glazing: 2 x 32mm Motorised Blind (5mm Clear HS + 22mm Air Gap With 12.5mm Slats + 5mm Clear HS) Profiles: Frame: 41065 C 50 - DOOR FRAME Mullion/Transom: 41064 C 50 - BIG MULLION Additional Articles: REMOTE + CONTROL BOX- H.1.1 |
| 114 | SIZE: 3000 mm x 2800 mm SL 36 Colours: Akzonobel 1000 Glazing: 2 x 24mm (6mm Clear HS + 12mm Air Gap + 6mm Clear HS) Panel: 1 x FIBER MESH Profiles: Frame: 63024 SL 34/36 - 3 TR with Leg Window Vent: 63048 SL 36 - Double Interlock, 63038 SL 36 - Handle/Lock Shutter, 63039 SL 36 - Top/Bottom Shutter, SP0263 SL 36 - Nylon mesh Auxiliary, 63037 SL 36 - Single Interlock, 63026 SL 36 - Reinforcement Interlock Window Hardware: 1 x SL36 ROLLER: ROLLER HANDLE: WAW SLEEK RECESS MULTI POINT H- H.1.6 |
| 115 | SIZE:900 mm x 2800 mm C 50 Colours: Akzonobel 1000 Glazing: 1 x 20mm (5mm Clear HS + 10mm Air Gap + 5mm Clear HS) Profiles: Frame: 41065 C 50 - DOOR FRAME Door Leaf: 43051-DGU CD 50 - DGU GLASS SHUTTER Door Hardware: SLEEK DOOR HANDLE Additional Articles: C50 CYLINDER WITH INSIDE KNOB OUTSIDE KEY Bottom Configuration: Bhavya 002- H.1.5 |
| 116 | Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked. 3.5 C x 70 Sqmm XLPE cable- C.2a |
| 117 | Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked. 3.5 C x 50 Sqmm XLPE cable- C.2B |
| 118 | Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked. 3.5 C x 35 Sqmm XLPE cable- C.2C |
| 119 | 12 way (4 + 36), Double door- MR 102 |
| 120 | Providing and applying premium quality ANTI- BACTERIAL TEXTURE Plastic Paint of approved make and shade on internal walls and ceilings, over prepared surface including surface cleaning, minor crack filling, putty work, sanding, one coat of primer and minimum two coats of premium emulsion paint, complete in all respects as per manufacturer’s specification and direction of Engineer-in-charge.- G.1 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
