|
| 1 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.DSR 2023- 2.27 |
| 2 | Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-Charge.DSR 2023- 2.36 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8 |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete., Hot finished welded type tubes.DSR 2023- 10.16.1 |
| 5 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement, All works upto plinth level, Concrete of M30 grade with minimum cement content of 350 kg /cumDSR 2023- 5.33.1.2 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.1.1 |
| 7 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand)DSR 2023- 13.4.1 |
| 8 | Trenching and Back Filling. Sanctioned Rate. Along the perimeter- S.R. |
| 9 | Supply of 4Mtr height decorative pole made of mild steel/steel tube complied with IS1161/IS 3601, minimum thickness of 3mm. (chemical and Mechanical test report shall submited) The pole shall have two section, base section having length of IMtr with dia of 140mm and top section having length of 3mtr with dia of 76mm Pole shall be mounted on square base plate of dimensions 200*200*12mm thickness with 4 nos of slots, having distance of 141mmx141mm and size of 20x35mm. The base section of Pole shall have an in-built junction box to accommodate a heavy duty connector for loop-in and loop-out of UG cable and provision for MCB with anti-theft lock arrangement. The Pole Shaft should be fabricated out of Steel tube of grade YST 240. Structurally designed base plate of Steel A36/A572-50 or equivalent should be welded with the pole shaft. The complete structure shall be hot dip galvanized through 7 stage process and single dip process as per ASTM A123 and minimum average coating shall not be less than 65 microns(Test report shall be submitted) before traeting with primer. After galvanisation structure shall be treated with two coats of high quality primer and thereafter coated with Polyurethane paint to minimum average DFT of 100 microns(Test report shall be submitted). The pole shall be designed as per EN40 for withstand basic wind speed of 169kmph. The complete structure should be hot dip galvanised Kesslec Ecopole 4 mtr GI PU Painted with Base plate, MR.- M.R. 4 Mtr Height decorative pole |
| 10 | Supply and fixing of OVER 600 mm long aluminium dia cast body post top is mounted at the top with polycarbonate diffuser and fitted with 40w led disc bis registered make philips, bajaj, twinkle, lustore or equivalent repuateted make PSR BOND: CE/490/2024- P.S.R. |
| 11 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer-Incharge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD 501 6.00 Sqmm 4 Core- PWD 501 (a) |
| 12 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer-Incharge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD 501 25.00 Sqmm 3.5 Core- PWD 501 (b) |
| 13 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect 40 A TPN PWD 807- PWD 807 |
| 14 | Supply and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend coupler etc. conforming to IS 14930 Part II omplete with fitting andcutting jointing etc. in the existing trench,complete asrequired.63 mm dia (OD-63mm ID-51 mm nominal) PSR- 218(12) |
| 15 | Making bajri path including preparation of sub grade, supplying and laying brick aggregate of 50mm nominal size 7.5 cm deep with binding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.DSR 2023- 16.10 |
| 16 | Supplying and Fixing of Duplex Multi Play Fun System - 06 Outdoor Playing Equipment Including Necessary Fittings, T&P etc all Complete in Direction of Engineer in Charge. (Model No. FPDB11, Make Fun Play/ Kompain/ Arihant) Rate 1025017.00-1025017 |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).DSR 2023- 16.69 |
| 18 | Supplying and Fixing of Standered Multi seater See Saw outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSS12, Make Fun Play/ Kompain/ Arihant)- Sanctioned RAte 17578 |
| 19 | Supplying and Fixing of Monkey Climber outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPCL43, Make Fun Play/ Kompain/ Arihant)- s/f Monkey Climber outdoor playing |
| 20 | Supplying and Fixing of Four Seater Merry Go Round Outdoor Playing Equipment Including Necessary Fittings, T&P etc all Complete in Direction of Engineer in Charge. (Model No. FPMR11, Make Fun Play/ Kompain/ Arihant) Rate 50756.00- Rate 50756.00 |
| 21 | Supplying and Fixing of Four Seater Swing with sparrow outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSW 10, Make Fun Play/ Kompain/ Arihant)- Four Seater Swing |
| 22 | Supply and installation of Deck wood, Ipe/Pine of random length but 140 mm wide and 25-26 mm thick planks finished and good for outdoors- deckwood |
| 23 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.DSR - 2020 (Horticulture)- 3.76 |
| 24 | Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.DSR - 2020 (Horticulture)- 6.2 |
| 25 | Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.DSR - 2020 (Horticulture)- 6.19 |
| 26 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.DSR - 2020 (Horticulture)- 6.7 |
| 27 | Fine dressing of the ground.DSR - 2020 (Horticulture)- 2.7 |
| 28 | Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead and lifts (earth measured in stacks will be reduced by 20% for payment).- Supply Earth 20km |
| 29 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).DSR - 2020 (Horticulture)- 2.25 |
| 30 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-chargeDSR - 2020 (Horticulture)- 2.9 |
| 31 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).DSR - 2020 (Horticulture)- 2.8 |
| 32 | 8 Layer Acrylic flooring for the play and surronding area- 8 Layer Acrylic flooring |
| 33 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :, Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick.DSR 2023- 11.26.1 Please Enable Macros to View BoQ information |
