|
| 1 | Supply, Erection, Testing and Commissioning of High mast light (16 Mtr Height) |
| 2 | High mast yard lighting with 200W LED lamps(make Havells,Bajaj) with 12 fittings and feeder pillars having Timers for Automatic On-Off including aviation light including laying of foundation,cabling etc.as per site specifications/requirements |
| 3 | Improvement of Earthing of Power Transformers |
| 4 | Improvement of Earthing of Power Transformers (08 No) by way of creation of new earthing points with1. Earth Pit (treated)3mtr: 8No2. MS Round 40mm Dia: 0.1056MT3. G.I Flat 75mmx10mm: 0.928 MT4. Nut & Bolts Of Sorts : 0.04 MT5. Good Earth : 24 Cu.m |
| 5 | LAYING OF INTERLOCKING TILES AND CONSTRUCTION OF DRAIN |
| 6 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 7 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. |
| 8 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level |
| 12 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 13 | CONSTRUCTION OF DRAIN |
| 14 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth |
| 15 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 16 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 19 | LAYING OF GI PIPES FROM BOREWELL TO 132KV AND 33KV YARDS |
| 20 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 25 mm dia. G.I. pipes |
| 21 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 22 | Providing and fixing brass bib cock of approved quality. 20 mm nominal bore |
| 23 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 24 | 1. All the carriages (MT as well as H/L) shall be deemed to be included in the scope of work.2. Any items not mentioned in the BOQ but necessary for completion of work shall be deemed to be included in the scope of work. Please Enable Macros to View BoQ information |
