|
| 1 | Maintanance works on Source12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 4 | Providing and fixing 1 mm thick M.S. sheet sliding- shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer |
| 5 | Lettering with black Japan pint of approved brand and manufacture |
| 6 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 7 | Pumpset 10hpa. Pump & Motor : Supply, erection, testing and commissioning of KWA pre-qualified reputed make open well submersible motor pump set, conforming to IS 8034/2002 and amended thereafter and BEE3 Star of rated discharge, and Head, with Bronze or Cast SS impeller, Brass Screws and CI FG 200 grade Pump Bowl / Diffuser with ISI mark. The pump shall be directly coupled to a continuous rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283,/ 1995 as amended thereafter, suitable for operation in AC 3 phase 415 V + /- 10%, 50 Hz + / - 5%, Duty Conditions : Discharge - 1.96 lps Total Head -177 m HP:- 10 Hp b. Starter: Fully automatic air break star delta starter with single phase preventer with ammeter confirming to IS 13947, iec 60947-1 with auto restart facility for pump houses where panel boards are available, Supply and delivery of Star-Delta starter where panel boards are available confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ three Phase/50HZ(+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 Nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature Circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventer, dry running preventer and On/Off Push button switches, wiring with 1 sq.mm / 4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor. as per IE rules and code of practice, for working 10 HP Submersible pump set, considering all practical losses in Voltage and efficiency. c. Panel board: Supply, erection, testing and commissioning of MS fabricated control panel board , suitable for providing control system for running pump sets, provided with a common earth bus for the entire panel as per IE rules and code of practice. The panel shall be fitted on a common base frame on suitable support clamps, for working 10 HP Submersible pump set. d. Cabling work: Supply, laying, testing and commissioning of above pump set , Copper Cable not below 25 sqmm , 6 lines, from starter to motor, for working 10 HP Submersible pump set. considering energy conservation, additional length allowance as loop for future repair as per the direction of Engineer. e. Earthing: Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing Gl/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards. f. Capacitor:Supply, erection, testing and commissioning of heavy duty APF capacitor for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834g. Valves:Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non retum valve of 50 mm dia.1.60 PN pressure rating. Valves , of reputed make.h. Suction and delivery pipe connections:Supply and fitting of 50mm dia. best quality C class GI erection pipe, for a total length of 10 m. suitable for the above pump set with suitable flanges, bends, nut and bolts IR sheet packing etc. complete , welded firmly inside and out side for the flange,to hold the heavy load, and for facilitating lifting and erection of motor inside the pump house) and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main.i. General Conditions:Warranty - 2 years (rate inclusive of 2 year warranty and maintenance during a period of 2 years from the date of commissioning), for Motor pump set and accessories supplied. |
| 8 | Supply and installation of 25 Sq. mm additional cable beyond the initial supply |
| 9 | Electronic mobile starterSupply and installation of ROBOTIC CONTROL; SYSTEM mobile starter with all required fittings and features like motor ON/OFF through missed call, motor ON/OFF through SMS , in bulid preventer and auto starter suitable every single / three phase motor starter, inbuilt star delta timer , cyclic timer, dry run prevention, over load prevention,real time clock , 1 year guarantee and customer service at site whwnever required |
| 10 | House connection worksProviding 15mm water meter from existing PVC / HDPE line, using 20mm Indian Standard Class 6 uPVC pipe and Ball Valve, uPVC, 12.5kg/cm2, 20mm ,PVC Air valve, Elbow, MTA,FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. |
| 11 | Providing 15mm PVC Tap in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers. |
| 12 | Providing and fixing stand post in house connection using 63 mm dia 6kg/cm2 uPVC pipe of height 1 meter (+30 cm below under ground fixed in cement concrete 1:2:4 using 20 mm aggregate) with end cap |
| 13 | Testing water sample from the source of scheme at any Government laboratory and submitting the report- both physical and bacteriological parameters. |
| 14 | Pipeline works:Providing and fixing G.I. pipes(Medium) complete with G.I fittings including trenching and refilling etc. External work32 mm dia nominal bore |
| 15 | Providing and fixing G.I. pipes(Medium) complete with G.I fittings including trenching and refilling etc. External work40 mm dia nominal bore |
| 16 | Providing and fixing G.I. pipes (Medium)complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore |
| 17 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore |
| 18 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 19 | Hollow block masonry using pre cast blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 20 | Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 21 | Supply of PVC Pipe, 10kg/cm2, 32mm Dia. |
| 22 | Supply of PVC Pipe, 10kg/cm2, 40mm Dia. |
| 23 | Supply of PVC Pipe, 10kg/cm2, 63mm Dia. |
| 24 | Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 32 mm nominal outside diameter pipes. |
| 25 | Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 40 mm nominal outside diameter pipes. |
| 26 | Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 63 mm nominal outside diameter pipes. |
| 27 | Engaging Coolie |
| 28 | Engaging Fitter ( grade 1). |
| 29 | Rectification of leakages of 32mm, 40mm & 50mm G.I. Pipes by replacing lengths up to 1.0m including earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar / concrete cutting, by cutting, removing and stacking the damaged portion from the existing line without causing any damages to the remaining portion and specials and conveying and replacing with G.I. Pipes of suitable size and jointing by thraded coupler and union of suitable size including threading, alignment, laying and jointing to make a water tight joint, testing the line to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges hire and conveyance of tools, plant and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion, including the cost of specials but excluding cost of pipe and as per the direction of departmental officers etc., complete. |
| 30 | Supplying and laying uPVC pipe specials for 32 mm dia uPVC pipe with class 10kg/cm2 or higher @ 3% rate of cost of pipes |
| 31 | Supplying and laying uPVC pipe specials for 40 mm dia uPVC pipe with class 10kg/cm2 or higher @ 3% rate of cost of pipes |
| 32 | Supplying and laying uPVC pipe specials for 63 mm dia uPVC pipe with class 10kg/cm2 or higher @ 3% rate of cost of pipes |
| 33 | Maintanance works on GLSRClearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 34 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 35 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 36 | Lettering with black Japan pint of approved brand and manufacture Please Enable Macros to View BoQ information |
