|
| 1 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms , wash hand basin slab, urinal partition etc and like over and including 15 mm thick bedding in cement mortar (1:4) pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including Dismentling of stone slabs and tiles of any description or thickness in floors, approns etc, laid bedded and pointed in any mortar complete all as specified and directed by Engr-in charge. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed by Engr-in charge. |
| 3 | M&L for glazed coloured ceramic tile ,first quality( of approved class , colour and design/ shade ) of size 300 x 450 / 350x450 / 350x250mm and 7-8mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed by Engr-in charge. |
| 4 | M&L for non skid Ceramic tiles,first quality( of approved class , colour and design/ shade) square/ rectangular) area of tiles exceeding 0.11 sqm but not exceeding 0.36 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15 mm thick Screed bed in Cement mortar 1:6 complete all as specified and directed by Engr-in charge. |
| 5 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubing down with water etc, complete all as specified and directed by Engr-in charge. |
| 6 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement)complete all as specified and directed by Engr-in charge. |
| 7 | M&L for preparation of newly plastered surface and applying of white wall putty approx 1 mm thick in one layer as per manufacturer's instruction and make the surface smooth by rubbing with sand papers etc and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed by Engr-in charge. |
| 8 | M&L for preparation of old plastered surface of ceiling, cornices etc, make the surface smooth by rubbing with sand papers etc and applying three coat of white wash complete all as specified and directed by Engr-in charge. |
| 9 | M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius old size bricks built in Cement Mortar (1:4), incl Demolition of brick or stone boulders masonary built in cement mortar or cement lime mortar including all quions, arches pillars etc complete all as specified and directed by Engr-in charge. |
| 10 | S&F in repair Vitreous China urinals, half stall type white urinal, complete including providing and fixing plugs, urinal spreader, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engr-in charge. |
| 11 | S&F in repair white vitreous China wash down water closet pan two piece pattern, and trap (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed by Engr-in charge. |
| 12 | S&F in repair vitreous china squatting pan Orissa pattern size 630 x 450 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including P,S trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, ccomplete all as specified and directed by Engr-in charge. |
| 13 | S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC long bend flush pipe 32 mm bore complete all as specified and directed by Engr-in charge. |
| 14 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in charge. |
| 15 | M&L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken, filling and mass concrete complete all as specified and directed by Engr-in charge. |
| 16 | Supply and applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating,smart damp block 2k suprema or approved equivalent,having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing including epoxy type material for joints of pipes of any type in floor or wall as per site requirement etc complete as per manufactures specifications complete all as specified and directed by Engr-in charge. |
| 17 | M&L for Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, repair mortar SMARTCAE REPAIR MORTAR capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed by Engr-in charge. |
| 18 | M&L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate ) 40 mm thick in sunken of bath /toilet /Kitchen etc with and including WPC as per manufacture's instructions complete all as specified and directed by Engr-in charge. |
| 19 | M&L for 15mm thick plastering in CM 1:4 with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound complete all as specified and directed by Engr-in charge. |
| 20 | S&F under counter wash hand basin, of approved colour, oval type fixed over granite slab of Appropriate size including brackets, PVC connection, waste pipe, etc all as specified and as directed. Note- Granite slab will be measured and paid separately. |
| 21 | S&F in repair for beveled edge looking mirror of selected quality glass 5 mm thick ( size exe 1.5 sqm but not exe 2.0 sqm) wall mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 22 | S&F towel rail, D type, brass, chromium plated, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed by Engr-in charge. |
| 23 | S&F fancy type MS chromium plated health faucet (ABS Body) with 1.25 meter long flexible tube, and ABS wall hook suitable for 15 mm bore dia pipes or for unions and fixed complete all as specified and directed by Engr-in charge. |
| 24 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15/20 mm dia pipes complete all as specified and directed by Engr-in charge. |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15mm dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing or Concealed work, i/c cutting chases and making good the wall etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 26 | S&F in Waste coupling to WHB/ kitchen and laboratory sink of 32mm dia complete all as directed by Engr in Charge, |
| 27 | S&F bib tap with flange , fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed by Engr-in charge. |
| 28 | S&F fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed by Engr-in charge. |
| 29 | S&F 600 mm PVC connection of 15 mm dia with PTMT Nuts complete all as specified and directed by Engr-in charge. |
| 30 | S&F fancy type two way angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed by Engr-in charge. |
| 31 | S&F pillar taps, brass, fancy type chromium plated, screwed down high pressure with, with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed by Engr-in charge. |
| 32 | S&F 125 mm size PTMT grating with waste hole ( min wt 40gm) complete all as specified and directed by Engr-in charge. |
| 33 | S&F liquid soap container of PTMT fixed with and i/c chromium plated brass screw and wooden/ platic cleats (min wt 150gm) complete all as specified and directed by Engr-in charge. |
| 34 | S&F in repair PVC (SWR) pipes 110m bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors/ fixed to wall complete all as specified and directed by Engr-in charge. |
| 35 | S&F in repair PVC (SWR) bends any radius, for 110 mm bore of pipe complete all as specified and directed by Engr-in charge. |
| 36 | S&F in repair PVC (SWR) junction angle single 'T', for 110 mm bore of pipe complete all as specified and directed by Engr-in charge. |
| 37 | S&F in repair PVC (SWR) vent cowl, for 110 mm bore of pipe complete all as specified and directed by Engr-in charge. |
| 38 | Taking down of any chowkats or frame (Wooden, steel, aluminium, press steel, pvc etc.) with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in charge. |
| 39 | Taking down of any chowkats or frame (Wooden, steel, aluminium, press steel, pvc etc.) with shutter (without taking off shutters from the frame) exe 1.5 sqm but not exc 4.0 Sqm each complete all as specified and directed by Engr-in charge. |
| 40 | S&F Factory made single extruded WPC ( Wood Polymer Composite) solid door/ window/Ceosetory window & other Frames/ Chowkhat of 50x100 mm comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade), calcium carbonate and nature fibre ( wood powder/ rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/ cum, screws withdrawal strength of 2200 N ( Face) & 1100 N (Edge) , minimum compressive strength of 58 N/mm2 and modules of elasticty 900 N/mm2 and resistance to spred flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fibre retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for seperately) complete all as spfd and direted. Note:- For WPC solid door/ window frames,minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable . Variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 42 | S&F SS butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed by Engr-in charge. |
| 43 | S&F 300 mm long aluminum anodised barrel tower bolts of extruded section ccomplete all as specified and directed by Engr-in charge. |
| 44 | S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed by Engr-in charge. |
| 45 | S&F alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc. complete all as specified and directed by Engr-in charge. |
| 46 | S&F powder coated aluminium sliding window/ventilation two track with two glass shutters incl fixing 4.8 mm thick plain glass, and outer side covered with wiremesh with and including stainless steel wire gauge cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium power coatet sections, aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved. Note- Size of aluminium section shall be under :-(i) Two track top and vertical - Jindal main-2010 section No 20829 or equivalent (ii)Two track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent |
| 47 | S&F powder coating ( minimum thickness of powder coating 50 micron) aluminium frame for door , window, ventilator with one or more rebates including joining cleat for fixing etc. complete all specified and directed. |
| 48 | M&L for 4 mm thick ordinary glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding or execeeding 0.50 Sqm in each pane complete all as specified and directed by Engr-in charge. |
| 49 | S&F powder coated ( thickness or powder coating not less than 50 micron) aluminium window, ventilator shutter, side hung type without sash bar, aluminium section weighing 0.55 kg/rm including necessary joining cleats , glazing clips, ruber neoprene packing,aluminium snap beading , screws, aluminium fitting such as peg stay 150 mm long, hinge type B-21, 100 mm long , and suitable handles complete all as specified and directed by Engr-in charge. |
| 50 | Excavating in post holes (or similar holes) each n. exc. 0.5 cum, gettting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n exc. 50 mtr and making good surface complete all as specified and directed by Engr-in charge. |
| 51 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (using 20mm graded stone aggregate) in column, pillars, piers, posts, side support etc similar work etc complete all as specified and directed by Engr-in charge. |
| 52 | M&L roof truss (framed) trussed, purlins, crane gantries, rails ,angle, box type section,and fasterning and heavy bracket framing (Beam, tee, angle, M S plates etc including steel primer coat, welding, distnace pieces cleats etc confirming to Fe290 grade E-165 complete all as specified and directed by Engr-in charge. |
| 53 | M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in charge. |
| 54 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in charge. |
| 55 | Demolition Cement concrete(unreinforced) of any description and any position, n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 56 | M&L PCC (1 :4:8) type C2 using 40mm aggregate as in floors all as complete all as specified and directed by engr-in-charge. |
| 57 | M&L Machine cut kota stone slab flooring 20-25mm thick, incl over 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in charge. |
| 58 | Demolition of stone slab and tiles of any description or thickness in floor,apron and laid dry or laid dry and pointed complete all as specified and directed by Engr-in charge. |
| 59 | M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius old size bricks built in Cement Mortar (1:6), complete all as specified and directed. |
| 60 | M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed. |
| 61 | M&L for applying two coats of cement based paint over a coat of primer on old/ newly plastered surfaces including preparation, complete all as specified and directed by Engr-in charge. |
| 62 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 63 | Demolition of reinforced cement Concrete in any position and in any location and at any height, removing demolished material to a distance exceeding 1km or outside of defence land complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F rotational moulded polyethylene water storage tank 500 ltr capacity fixed in position(cylinderical vertical with closed top) including PTMT with epoxy coated Aluminium rod & high-density plastic float ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) ball valve high pressure 25 mm dia bore, incl tank nipple etc complete all as specified and directed by Engr-in-Charge. |
| 65 | M&L for 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including if any required taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors incl testing complete all as specified and directed by Engr-in-Charge. |
| 66 | M&l for 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including if any required taking up or down existing GI tubing and connections,including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors incl testing complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F 20 mm gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron/GI pipe,complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F 25 mm gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron/GI pipe, complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. |
| 70 | Description all as per Sl item No. 69.00 herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed. |
| 71 | Description all as per Sl item No. 69.00 herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed. |
| 72 | Description all as per Sl item No. 69.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLS copper earth wire for modular switch socket combination 3 pin 15 amps on independent board complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, 230 V complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module suitable for 15 Amp plug top Multipurpose 230 V complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F Modular Switch Piano flush type 6 amp single Pole one way 230 V complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F Modular switch 1 way 16A, 1 module flush type single Pole one way 230 V complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F Ceiling rose surface bakelite surface 65 x 50mm, 3 terminals complete all as spfd and directed by engr -in -charge. |
| 78 | S&F bulk head 10 W with LED bulb complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 80 | S&F LED bulb 7 W complete all as specified and directed by Engr-in-Charge. |
| 81 | Supply & Fixing LED mirror light fitting 10 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack complete all as specified and directed. |
| 82 | Supply & Fixing LED light fitting 20 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack complete all as specified and directed. |
| 83 | S&F modular electronic ceiling fan regulator stepped type 2 module 120 W heavy duty suitable to work on 230 volts complete all as specified and directed. |
| 84 | M&L for Sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 6 sq mm copper cable multi stranded conductor drawn through in and including PVC rigid non metallic concealed conduit 20 mm dia, medium duty, ISI Marked to be terminated in DB box as per IS including of 6 sqmm dia FRLS PVC Copper cable green colour as earth wire connected to earth complete all as specified and directed. |
| 85 | S&F MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA(type 'C') complete all as specified and directed. |
| 86 | Supply & Fixing MCB SPN, 240 Volts, 32 Amps breaking capacity 10 KA (type C curve) complete all as specified and directed. |
| 87 | S&F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed. |
| 88 | S&F exhaust fans made of metallic body AC single phase 240V copper wounded of size 300 mm sweep with louver shutter white in colour complete including making holes of correct size suitable for mounting the exhaust fans and making good the disturbed surfaces complete all as specified and directed by Engr-In-Charge. |
| 89 | Supplying laying, jointing, testing and commissioning ofLT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 16 sqmm 2 core all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc . Excavation, earthwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely) complete all as specified and directed by Engr In Charge. |
| 90 | Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out complete all as specified and directed. |
| 91 | Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed. |
| 92 | Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 93 | Material & labour for Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and directed.Note: Only punned thickness shall be measured and paid. |
| 94 | Supplying & Laying un-reinforced pre cast flat concrete cable protection cover of class LV, type I, size 250 mm x 150 mm x 40mm, factory made, complete all as specified and directed . |
| 95 | Material & labour for replacement of 50 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed. |
| 96 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 97 | S&F security light 30 W LED energy saving and environment friend long life made up of pressure die cast aluminium housing and PC cover having TOP opening with IP 65 protection with all accessories complete all as specified and directed. |
| 98 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 2009 (Part-I) including taking out old existing earthing complete all as specified & directed. Please Enable Macros to View BoQ information |
