|
| 1 | Re-securing or easing and adjusting without taking down shutters of any description exc. 1.0 sqm but n exc 2.0 sqm each complete all specified and directed. |
| 2 | M&L welding in repairs exc. 2.5 cm but n exc 5.0 cm in length and not exc 6.0 mm thick complete all specified and directed. |
| 3 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 4 | M&L for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed |
| 5 | M&L for 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and directed. |
| 6 | M&L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all specified and directed. |
| 7 | M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint ,over 10 cm width or girth complete all specified and directed. |
| 8 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed. |
| 9 | S&F hasp and staple, safety type, aluminium adodised with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised (Size of hasp and staple in 125mm) complete all as specified and directed. |
| 10 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (30mm Width of flaps when open) complete all as specified and directed. |
| 11 | S&F in repair SS butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed. |
| 12 | S&F in repairs 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 13 | S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed. |
| 14 | S&F in repairs alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc complete all specified and directed. |
| 15 | S&F In repair 300 mm long , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all specified and directed. |
| 16 | S&F aluminium body as per requred mortice lock, verticle type, size 100 mm aluminium door 4 lever complete all as specified and directed |
| 17 | S&F in Repair of double action floor spring hydraulically regulated for aluminium door, made up of minimum 1.25 mm thick aluminium alloy steel sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 18 | S&F in repair automatic hydraulic door closer, heavy duty with pivot , aluminium body, ISI marked, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 kg 80 kg complete all as specified and directed. |
| 19 | M&L for refixing of old glass panes with putty and nails etc complete all specified and directed. |
| 20 | M&L for renewal of old putty of glass pane complete all as specified and directed. |
| 21 | M&L for Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba complete all specified and directed. (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 23 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding ( but not backing ) including rubbish off the premises complete all as specified and directed |
| 24 | M&L for non- skid coloured creamic tiles (1st quality/ premium quality) 7 to 8 mm thick, ( square/ rectangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 25 | M&L for glazed ceramic colourd tiles joint free of size 300x200x7 mm (1st quality/ premium quality) , in vertical surfaces such as riser of step, skirting, dado and piller, over and including rendering 10 mm thick platering as bed or bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or colourd cement to match complete all as specified and directed |
| 26 | Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed. |
| 27 | M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM(1:6) for wall but complete all as specified and directed. |
| 28 | Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 29 | M&L for 15mm thick rendering in CM 1:6 on surfaces of wall finished surface fair & even complete all specified and directed. |
| 30 | Repairs to plaster with cement mortar 1:4 of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, complete all specified and directed. |
| 31 | M&L for 5 mm thick cement plaster in 1:3 cement mortar, on concrete ceiling surface finished even and smooth without using extra cement, complete all specified and directed. |
| 32 | M&L Preparation of old/new surfaces of Ceiling, plastered on un plastered by brooming down or steel wire brushing, and applying one coat of white wash complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 34 | S&F Kitchen Plate rack with & including shelves and hanging arrangements for utensil for kitchen , made of stainless steel sheet 0.63 mm thick ,size 900 mm x 600mm x 250mm complete all specified and directed. |
| 35 | S&F floor door stopper double leg of aluminium alloy body of 70 mm length with aluminium base plate of size 50 mm x 40mm complete all as specified & directed. |
| 36 | Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed |
| 37 | M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating chamfered necessary for work complete all specified and directed. |
| 38 | S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 39 | S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 40 | S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 41 | S&F in repair pillar taps,with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 42 | S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed. |
| 43 | S&F in repair 125 mm size chromium plated grating complete all as specified and directed. |
| 44 | S&F in repair towel rail ,D type, brass, chromium plated, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed. |
| 45 | S&F in repair Chromium plated brass wall mixer for mixing hot & cold water screwed down for iron pipe complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. |
| 46 | S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed. |
| 47 | S&F in repair SS fancy type curtain rod shall be 25 mm dia of including bracket rings,fancy knob , curtai ring 08 Nos minimum including all fixing arrangement complete all as specified and directed. |
| 48 | S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all specified and directed. |
| 49 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 50 | S&F PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all specified and directed. |
| 51 | S&F PVC (SWR) bends any radius, with access door, for 110 mm bore of pipe complete all specified and directed. |
| 52 | S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. |
| 53 | S&F PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe complete all specified and directed. |
| 54 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed. |
| 55 | M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm. complete all as specified and directed. |
| 56 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 57 | S&F door seal bottom, rubber shield, anti rust, brown colour black rubber as per required door size including necessary screws etc complete all specified and directed. |
| 58 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 59 | S&F in repair Waste coupling to WHB/ kitchen and laboratory sink of 32/40 mm dia complete all as directed by Engr in Charge, |
| 60 | S&F in repair PVC Waste pipe( streachable) to WHB/ kitchen sink of 32 mm dia complete all as directed by Engr in Charge, |
| 61 | S&F in repair GI Elbow/Tee/Socket of 15 mm dia to be fixed in any position and at any height complete all as directed by Engr in Charge, |
| 62 | S&F in repair GI Union of 15 mm dia to be fixed in any position and at any height complete all as directed by Engr in Charge, |
| 63 | S&F PVC water tank covers for 500/1000 ltr capacity complete all specified and directed. |
| 64 | Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc.500 liter and removing from site complete and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed. |
| 65 | S&F in repair for 600x450mm beveled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 66 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 67 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed |
| 68 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. |
| 69 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 70 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exe 4.00 Sqm each complete all as specified and directed. |
| 71 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. |
| 72 | S&F framed work such as guard bars, grills , hold fast, door frame etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 73 | M&L factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed |
| 74 | M&L factory made 30 mm thick flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed |
| 75 | S&F factory made 35 mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed |
| 76 | S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc.complete all as specified and directed. |
| 77 | S&F factory made solid panel pvc door shutter with 30 thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheet for top rail, lock rail, bottom rail on eigther side and gap insert top rail and bottom rail; Panelling of plain colour pvc sheet to be fitted in ms frame welded/sealed to stiles & rails with suitable PVC sheet beading, and joint togther with solventcement, as per drawing specification complete all as specified and directed. |
| 78 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 79 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated steel surfaces complete all as specified and directed |
| 80 | S&F powder coated ( minimum thickness of powder coating 50 micron) aluminium frame for door , window, ventilator with one or more rebates including joining cleat for fixing etc. complete all specified and directed |
| 81 | S&F powder coated ( thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/rm including necessary joining cleats , glazing clips, ruber neoprene packing, handles 2 Nos in each door , hinges, anodised aluminium snap beading complete all as specified and directed. |
| 82 | S&F in repair of 4.0 mm thick tinted glass for aluminium door of any size each pane complete all specified and directed. |
| 83 | M&L for repair any type aluminium work for doors, with extruded built up standard tubular sections/ appropriate Z sections and other sections including taking down and refixing in same opening of door shutter or frame/ chowkhat n exe. 3.0 sqm, fixing with dash fasteners of required dia and size, hinge 150 mm size, 02 no of aluminium door handle, required necessary tower bolt, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge. Note:- Required glass, Double action floor spring hydraulically regulate, automatic hydraulic door closer, mortic lock for aluminium door shall be paid separately complete all specified and directed. |
| 84 | M&L for repair any type of aluminium window, ventilator with shutter, and partition (fixed portion), with extruded built up standard tubular sections/ appropriate Z sections and other sections including taking down and refixing in same opening of window, ventilator, and partition orshutter, frame/ chowkhat n exe. 1.50 sqm, fixing with dash fasteners of required dia and size, hinge 150 mm size, 02 no of aluminium door handle, required necessary tower bolt, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all specified and directed. Note:- Required glass shall be paid separately complete all as directed. |
| 85 | Repair to rolling shutter without taking off rolling shutter securing or easing, cleaning, greasing, oiling, welding in gear box, crank handle , rolling spring channels, ball bearing, pully, adjustment of lock device, pinion, gear box, shaft spring etc.& any description complete all as specified and directed. Please Enable Macros to View BoQ information |
