|
| 1 | Painting |
| 2 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) |
| 4 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 5 | OD105841/2024-2025:Chipping of existing plaster & loose/Delaminated concrete/material up to parent concrete surface from RCC members i.e.,Slabs,surfaces of columns & beams so that corroded reinforcement is exposed,propping the adjoining area with steel props,bracing & steel/timber runner with working platform as per design & pattern approved by the cosultant/Employer with labour,machinery etc. |
| 6 | OD106902/2024-2025:Providing & fixing 10mm dia Shear Connectors drilling holes using powered air blowers& fixing the connectors using Epoxy accrilate Anchor system of brand MAPEFIX PESF,from MAPEI as per drawings & specifications. The shear connectors shall be welded toreinforcement for a minimum length of 50mm. |
| 7 | OD106903/2024-2025:Providing and fixing 25x25x1mm thick weld mesh over the entire treated wall of existing wall120cm width ,welding with mapefix pe fixed rods as per Drawing and specifications |
| 8 | OD106905/2024-2025:Providing and applying epoxy bonding coat EPORIP of MAPEI on to the top of existing surfacebefore placing 50mm thick average Mapei T40 mortor, as a bond coat as per manufacturersspecification (on above existing concrete surface ). The product must comply with the minimumrequirements of EN 1504-4 and have the following performance characteristics: Workabilitytime (EN ISO 9514) : 60(at+23deg C)Linear shrinkage(EN 12617-1)(%):0.02(at +23deg C)0.10 (at+70deg C). |
| 9 | OD106906/2024-2025:Supply and application of one-component, normal-setting, shrinkage-compensating thixotropicmortar made from cementitious binders, selected aggregates, special additives and syntheticpolyacrylonitrile fibers (such as Mapegrout T40 produced by MAPEI S.p.A.), for reconstructingdeteriorated concrete structures. Apply the mortar after adequate preparation of the substrate(not included), by removing all deteriorated concrete to from a sufficiently-rough. Apply theproduct by trowel or spray with a continuous-feed rendering machine on a clean substratesaturated with water in layers from 1 to 3.5 cm thick next time enhance thickness.To improve expansion in the open air during the first few days of curing, add a special curingadditive when mixing the mortar to reduce both plastic and hydraulic shrinkage (such asMapecure SRA produced by MAPEI S.p.A) at a dose of 0.25% in weight on the weight of themortar. |
| 10 | 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete |
| 11 | 13.85.3:Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre |
| 12 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 13 | OD103992/2024-2025:Engaging coolie for cleaning etc. |
| 14 | 13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 15 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work Please Enable Macros to View BoQ information |
