|
| 1 | Civil Works |
| 2 | Electrical Works |
| 3 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 4 | Removing Door & windows: |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 6 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 8 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand): With Modular bricks. Including scaffolding required for it complete. as per direction of Engineer-in-Charge.” . |
| 9 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.complete. as per direction of Engineer-in-Charge.” Size of tiles: 300mm x 450mm/ 300mm x 600mm/300mm x900mm/ 600mmx 1200mmNote: Tiles samples shall be approved by the EIC or user department before installation. |
| 10 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.complete. Size of Tile 600x600 mm |
| 11 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 12 | Carefully removing the existing wooden/ aluminum/ aluminium-glazed partition, Glazed-windows with wooden frames and work stations /cubicles from offices at NEC premises/ OAP Non engneering area and refixing the same with necessary alteration/addition at various sections at AIESL engineering premises OAP. This job includes cutting the exisiting wooden/aluminum partition with or without glass, loading the removed partitions and shifting to OAP and re-fixing available partitions and wooden/aluminum doors of any size, section and type etc.at all levels including erecting and fixing in position, providing /replacing anodized aluminum/wooden sections with necessary hardware like locks, door closers, hinges,gasket rubber, screws, nails etc., making the surface good with smooth finish, all complete at designated location as per given drawings,This also incudes providing and fixing available pre-laminatedparticle board as and where required. The rates shall include transport, engaging skilled & unskilled labour, tools, machine,equipement etc as instructed by EIC. (Including of cutting of glass with wooden framing) |
| 13 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 14 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 15 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 16 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 17 | Disposal of building rubbish / malba / similar unserviceable , dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 150 mm |
| 19 | Main Door |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)35 mm thick |
| 21 | Providing & Fixing decorative high pressure laminated sheet of plain I wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality: 1.0 mmthick |
| 22 | Butt Hinges |
| 23 | Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm |
| 24 | Door Closer |
| 25 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 26 | Tower bolts |
| 27 | Providing and fixing aluminium tower bolts, ISI marked, anodised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade , with necessary screws etc. complete |
| 28 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)Door thickness: 30 mm thick |
| 29 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 100 mm |
| 30 | Providing Aldrop |
| 31 | Providing and fixing aluminium sliding door bolts , ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 ) , transparent or dyed to required colour or shade , with nuts and screws etc. complete 300x16 mm |
| 32 | Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm |
| 33 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats) |
| 34 | Soling |
| 35 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 36 | Soling |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 38 | Remove pneumatic / electrical connections of Bauer Make Bead Breaker Machine, Nose wheel Bead Breaker Machine, Other (Optional) Bead Breaker Machine, Electric Breaker Machine. |
| 39 | Removal of Bauer Make Bead Breaker Machine, Nose Bead Breaker, other (Optional) Bead Breaker Machines (Qty.2), Assembly/ Disassembly stand, Electric Breaker stand and A321 Wheel assembly stand by cutting grouting bolts.Job includes minor excavation. |
| 40 | Shifting of Bauer make Bead Breaker Machine and Nose wheel bead breaker machine, other (Optional) Bead Breaker Machines (Qty.2), Assembly/ Disassembly Stand, Electric Breaker Machine, A321 Wheel Assembly stand with electric supply panel to new location within the same section. |
| 41 | Fixing of Bauer make Bead Breaker stand, Nose Wheel Bead Breaker stand, Assembly/ disassembly stand, Electric braker stand and A321 Wheel assembly stand with the help of grouting bolts (1 inch size Qty.20). Work includes minor excavation. |
| 42 | Removal of press by cutting grouting bolts (Qty.4) and shift the press at new location as decided by EIC. |
| 43 | Make a pneumatic connections for Bauer make and Nose Bead Breaker machine. Pneumatic supply source is available at new location. One extra pneumatic outlet is also required on ground level. Material required 1\\" Dia. MS pipe of 20 M length with required \\"T\\", Elbow joints, shut off valve, FRL Unit. |
| 44 | Supply and laying of 50 sq. mm, 4-core Aluminium armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC).Approved Make-Polycab,Finolex |
| 45 | Supply and laying of 4 core, 6 sqmm, Copper armoured electrical cable with termination and all required hardware to complete the electrical connections for electrical breaker machine. Job includes installation of Existing socket, plugs and power supply box. Approved Make - Polycab, Finolex. |
| 46 | SITC of 6 moduler 2 switch/ 2 socket for general use at various locations with 2.5 sqmm wire and 20mm MS conduit. Job include point wiring for switch board. Approved Make - 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Anchor/ GM/ Roma |
| 47 | Removal, shifting, reinstallation and commissioning of sanding M/c, Welding M/c, Grinding M/c, Therelac Oven, Wild Barfield Furnace, Air Pit Furnace, water tank. |
| 48 | Shifting & Installation of Chain Pully block (500 KG) as advised by EIC |
| 49 | Shifting of lathe machines (Qty.3), Grinder Machines (Qty.3) and Saw Machine (Qty.1) from COD, existing Machine Shop, Ground Floor, Hangar No. 1 to proposed COD Machine Shop (Old Fan T/R Section), Ground Floor , Hangar 2. Conect the equipment with respective electrical source. |
| 50 | FAN TR Section - Supply, Installation, testing and commissioning of 8-Way VTPN DD MCCB DB: Factory-made, powder-coated, 6-way distribution board with MCCBs and MCBs.Incomer (Main Incoming ): 200A, 4P MCCB, 1 no.( for incoming power supply).Outgoing Circuits:3P, 63A MCBs, 8 nos. (for various outgoing loads). Approved Makes: Legrand/ Schneider for the MCCB, MCB, and other associated components. |
| 51 | Cable Connections:Incomer - 4C X 50 sqmm, Aluminum, Armoured, length - 50 M. and outgoing cables -4C X 4 sqmm, Copper, Armoured, length - 100 M Approved Makes: Polycab/ Anchor/ FinolexJob includes: laying and termination of cables with required lugs, glads, screw.fixing of D.B with bracket and IN/OUT connection,ALL complete with hardware, and consumables to complete the job in its totality. Please Enable Macros to View BoQ information |
