|
| 1 | Part (A)- Supply |
| 2 | Tower Accessories. |
| 3 | Number Plate |
| 4 | Danger Plate |
| 5 | Phase Plate Set of red blue and yellow |
| 6 | Circuit Plate (Set of Two) |
| 7 | Bird Guard |
| 8 | Earthing Material |
| 9 | Conductor Accessories Suitable for ACSR Panther. |
| 10 | Vibration Damper |
| 11 | M.S. Joints. |
| 12 | Repair Sleeve & others items |
| 13 | P.A. Rod |
| 14 | Hardwares & Insulator Accessories for Conductor. |
| 15 | Single Suspn FTTG. |
| 16 | Single Tension FTTG. |
| 17 | Double Tension FTTG. |
| 18 | 70 KN Poreelain Insulator. |
| 19 | 120 KN Porelain Insulator. |
| 20 | Supply of Earth wire and accessories. |
| 21 | 7/3.25 mm GS Earth Wire |
| 22 | Suspension clamp seated type. |
| 23 | Tension Clamp |
| 24 | Copper Bond |
| 25 | Part (B)- Erection Work |
| 26 | Cost of excavation of 132 KV tower foundation pits including all earth work backfilling levelling etc. |
| 27 | Setting of stubs including all foundation work but encluding the cost of concreting excavation (Rate per Location) for following towers. |
| 28 | 132 KV DC Panther |
| 29 | Cost of concreting of all type of tower foundation including cost of cement, dewatering , shoring and shuttering, forming, curring cube test but excluding cost of reinforcement bars. |
| 30 | 1:2:4 concreting. |
| 31 | Erection of superstructure of 132 KV DC Tower and anchor tower and their extension wherever required including all work above ground level excluding hoisting in insulators hardware & accessories, but including fitting of danger number, phase plates, bird guard and fixing & punching for 132 KV SC/DC lines. ( Tower type- DC+0=1 No, DC+5=2 Nos., DC+15=2 Nos. |
| 32 | Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200 seperation of minimum 10 mm thickness with 10mm/12mm electrode & application of zine rich Aluminium paint of the affected surface including cost of all material including tack welding of river crossing tower & Anchor Towers. |
| 33 | Installation of steel reinforcement bars in RCC Foundation including cost of steel reinforcement bars with cutting bending placing dinding etc. |
| 34 | Laying, Stringing tensioning, clamping jointing etc. of ACSR Panther conductor including hoisting of insulators, fitting of all necessary hardware and accessories i.e. fitting armor rods vibration dampers etc. on all three phase of 132 KV SC Lines. |
| 35 | Laying, Stringing, tensioning, clamping, jointing including fitting of all necessary Hardware and accessories Earth wire etc. on 132 KV line |
| 36 | Grounding work including earthwork etc. pipe type grounding including cost of cake & salt. |
| 37 | Preparationn and submission of railway crossing profile betweem loc no 51Y DC+15 and 52 DC+15 in prescribed format alongwith railway questionnaire (3 sets) |
| 38 | Dismantalling work. |
| 39 | De-Stringing of conductor, disc insulator, rolling of Dismantle conductor and all associated work of all Three conductor |
| 40 | Dismantling of existing Earth wire, necessary hardware, reroling earth wire in empty drum and safely transportation of all removed material to 220KV Bansi S/S Store. |
| 41 | Dismantling of Towers, stacking of tower part and all associated work . |
| 42 | Transportation of Dismantled material including shifting up to loading point, loading into vehicle, transportation, and unloading at Store of 220 KV Bansi Substation. Please Enable Macros to View BoQ information |
