Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CEILING Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main `T` runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross `T` of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main `T` at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross `T` of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main `T` runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 1. GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. HSR 9.47 |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar HSR 5.7 |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) HSR 5.23 |
| 4 | KITCHEN PLATEFORMS/ WINDOW SILLS/ URINAL PARTITIONS Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. HSR 8.28 |
| 5 | Providing and injection chemical emulsion for PRE-CONSTRUCTIONAL ant termite treatment (excluding the cost of chemical emulsion) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimetre of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20% HSR 4.39 |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1. Of area 3 sq. metres and below HSR 5.29 |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. For thickness of tiles 10 mm to 25 mm HSR 5.43 |
| 8 | Removing old broken/serviceable glass of any thickness or size or description except polished plate glass from old wood or metal frames etc.(any thickness or size) hacking out old putty etc. including making good breakages in talking out and handling complete HSR 5.51 |
| 9 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. HSR 5.63 |
| 10 | CEMENT CONCRETE FLOORING Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 HSR 10.7 |
| 11 | A DOOR FRAMES, SHUTTERS AND WINDOWS Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid separately). 1.1. Second class teak wood HSR 12.1 |
| 12 | A DOOR FRAMES, SHUTTERS AND WINDOWS Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid separately). 1.3. Kiln seasoned and chemically treated Hollock wood HSR 12.1 |
| 13 | A DOOR FRAMES, SHUTTERS AND WINDOWS Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 3.1.1. 2nd class teak wood 50x12 mm HSR 12.3 |
| 14 | CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) HSR 11.5 |
| 15 | GRANITE FLOORING Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. HSR 10.50 |
| 16 | CERAMIC GLAZED TILES Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR 10.58 |
| 17 | CERAMIC GLAZED TILES Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR 10.60 |
| 18 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm HSR 10.63 |
| 19 | VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 2. Size of Tile 600x600 mm HSR 10.69 |
| 20 | VITRIFIED FLOOR TILES Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm HSR 10.70 |
| 21 | VITRIFIED FLOOR TILES Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. HSR 10.72 |
| 22 | SIGLE/BUILT-UP STEEL/TUBULAR SECTIONS Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works HSR 13.29 |
| 23 | SIGLE/BUILT-UP STEEL/TUBULAR SECTIONS Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes HSR 13.30 |
| 24 | A DOOR FRAMES, SHUTTERS AND WINDOWS Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 2. 1.0 mm thick HSR 12.12 |
| 25 | INTERIOR FINISHING Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58 |
| 26 | INTERIOR FINISHING Applying priming coat: 3. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works HSR 11.68 |
| 27 | INTERIOR FINISHING Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 2. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre HSR 11.69 |
| 28 | A DOOR FRAMES, SHUTTERS AND WINDOWS Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). HSR 12.15 |
| 29 | INTERIOR FINISHING Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work HSR 11.71 |
| 30 | INTERIOR FINISHING Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 11.78 |
| 31 | INTERIOR FINISHING Melamine polishing on wood work (one or more coat). HSR 11.91 |
| 32 | EXTERIOR FINISHING WALL AND ROOF SURFACES Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) HSR 11.95 |
| 33 | CUPBOARD SHUTTERS Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):1. 12 mm thick HSR 12.26 |
| 34 | FLUSH DOOR SHUTTERS Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 2. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws HSR 12.36 |
| 35 | FLUSH DOOR SHUTTERS Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): 1. Rectangular or square HSR 12.40 |
| 36 | STAINLESS STEEL FITTINGS Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 2. 100x60x2.50 mm HSR 12.74 |
| 37 | HYDRAULIC DOOR CLOSERS Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. HSR 12.89 |
| 38 | PTMT (Polytetra Methylene Terephthalate) FITTINGS Providing and fixing of roller blinds on windows complete with material and labour complete with push up and down arrangement as per approved design / colour and Engineer-in-charge. HSR 12.114 |
| 39 | FRP DOOR/WINDOW FRAMES AND SHUTTERS Providing and fixing partition up to ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture`s specification and direction of engineer in charge all complete. 4. 66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS : 14862 with suitable fibre cement screws HSR 12.155 |
| 40 | C ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) HSR 12.157 |
| 41 | C ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) HSR 12.157 |
| 42 | C ALUMINIUM WORK Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides HSR 12.158 |
| 43 | C ALUMINIUM WORK Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) HSR 12.159 |
| 44 | C ALUMINIUM WORK Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 1. Up to 5mm depth and 5 mm width HSR 12.169 |
| 45 | C ALUMINIUM WORK Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). HSR 12.171 |
| 46 | ALUMINIUM FALSE CEILING Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 1. With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) HSR 12.177 |
| 47 | Thermal Insulation of Buildings Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing Gl wire. HSR 28.47 |
| 48 | B BRICK WORK Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR 7.22 |
| 49 | HALF BRICK MASONRY Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand) HSR 7.28 |
| 50 | MINERAL FIBRE CEILING TILES Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance = 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 and7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre and 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. 2. With 20 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.7) HSR 32.47 |
| 51 | D REINFORCED CEMENT CONCRETE Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR 6.16 |
| 52 | I CENTRING AND SHUTTERING (FORM WORK) Centering and shuttering including strutting, propping etc. and removal of form for 4. Shelves (Cast in situ) HSR 6.30 |
| 53 | J STEEL REINFORCEMENT Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more HSR 6.33 |
| 54 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil. HSR 4.14 |
| 55 | RAIN WATER SPOUTS AND PIPES Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.1. Single tee without door75x75x75 mm HSR 9.58 |
| 56 | RAIN WATER SPOUTS AND PIPES Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.2. Single tee without door110x110x110 mm HSR 9.58 |
| 57 | RAIN WATER SPOUTS AND PIPES Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.1. Bend 87.5°75 mm bend HSR 9.58 |
| 58 | RAIN WATER SPOUTS AND PIPES Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2. Bend 87.5°110 mm bend HSR 9.58 |
| 59 | WASH BASINS, KITCHEN SINKS AND HARDWARES Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-1. White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer HSR 22.2 |
| 60 | WASH BASINS, KITCHEN SINKS AND HARDWARES Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. HSR 22.5 |
| 61 | WASH BASINS, KITCHEN SINKS AND HARDWARES Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge). 1. One way HSR 22.8 |
| 62 | WASH BASINS, KITCHEN SINKS AND HARDWARES Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge). 2. Two way HSR 22.8 |
| 63 | WASH BASINS, KITCHEN SINKS AND HARDWARES Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 withC.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 1.1. Kitchen sink with drain board 510x1040 mm bowl depth 250 mm HSR 22.10 |
| 64 | WASH BASINS, KITCHEN SINKS AND HARDWARES Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 2.1. Flexible pipe32 mm dia HSR 22.14 |
| 65 | WCs, URINALS AND URINAL PARTITIONS Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 2. Single half stall urinal with manually operated5 litre P.V.C. flushing cistern and manually operated stop cock/ angle valve HSR 22.26 |
| 66 | WCs, URINALS AND URINAL PARTITIONS Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. HSR 22.34 |
| 67 | C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes HSR 22.86 |
| 68 | C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes HSR 22.86 |
| 69 | BRASS FITTINGS Providing and fixing Unplasticised PVC connection pipe with brass unions : 1.1. 30 cm length 15 mm nominal bore HSR 22.101 |
| 70 | C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore HSR 22.108 |
| 71 | C.P. BRASS FITTINGS Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR 22.109 |
| 72 | LOFT AND TERRACE WATER TANKS Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR 22.181 |
| 73 | HDPE pipes for Drainage Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 ofE.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete HSR 22.222 |
| 74 | HDPE pipes for Drainage Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 ofE.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B 90mm o/d SWR UPVC pipe lines laid complete HSR 22.222 |
| 75 | COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR 23.3 |
| 76 | COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) HSR 23.3 |
| 77 | COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.2. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B HSR 23.4 |
| 78 | COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.2. Wiring in PVC conduit system for 3-pin5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B HSR 23.4 |
| 79 | COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.2. Wiring in PVC conduit system for 3-pin15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B HSR 23.4 |
| 80 | EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR 24.1 |
| 81 | EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. HSR 24.1 |
| 82 | EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. HSR 24.1 |
| 83 | EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR 24.1 |
| 84 | EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. HSR 24.1 |
| 85 | EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. HSR 24.1 |
| 86 | COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and submains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) HSR 23.5 |
| 87 | COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and submains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) HSR 23.5 |
| 88 | MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR 24.5 |
| 89 | PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISImarked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. HSR 23.7 |
| 90 | PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.3. Supply and erection of PVC CONDUIT ISImarked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 32 mm dia. HSR 23.7 |
| 91 | FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt HSR 23.8 |
| 92 | FITTING AND ACCESSORIES 11.8. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type HSR 23.8 |
| 93 | FITTING AND ACCESSORIES 11.9. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. T.V. Socket outlet modular type HSR 23.8 |
| 94 | FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type HSR 23.8 |
| 95 | Erection of cabin fan complete with necessary earthling including carriage from PWD store to the site of work. HSR 23.10 |
| 96 | Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required HSR 23.20 |
| 97 | Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required HSR 23.21 |
| 98 | MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.10. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 6 way ( 8 incoming 3phase*6 outgoing) HSR 23.22 |
| 99 | MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR 23.22 |
| 100 | MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE HSR 23.22 |
| 101 | MISCELLANEOUS 5.3. Supply and erection of U- PVC Trunking/Channel of following size including cost of fixing on wall, floor and ceiling etc. with required material complete the job in all respect up to entire satisfaction of the Engineer-in-charge of work. 38x25 mm HSR 23.23 |
| 102 | MISCELLANEOUS 8.1. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 2 pair telephone wire HSR 23.23 |
| 103 | MISCELLANEOUS 8.2. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 4 pair telephone wire HSR 23.23 |
| 104 | MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required HSR 23.23 |
| 105 | CEILING FAN/ EXHAUST FAN Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 1. 48\\" (1200mm) HSR 20.71 |
| 106 | CEILING FAN/ EXHAUST FAN Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. HSR 20.72 |
| 107 | LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 40. 35Sq mm 4 core (Arm.) HSR 24.13 |
| 108 | Providing and fixing 8mm thick wooden laminate flooring AC. 4 including 2mm foam panni complete in all respect as per approved shade. |
| 109 | Providing and fixing of 12mm thick toughened glass fixed partition on SS U Channel of size 22mm x 15mm x 22mm complete in all respect. |
| 110 | Providing and fixing blockboard consisting of 19mm thick waterproof ply with one side decorative face and back with 6mm thick ply finished with 0.8mm thick laminate with provision of shutters finished with 4mm thick veneer and all accessory hardware such as auto hinges, handles, nails, gypsum screws, lock, edge taping, telescopic channel for drawers etc.as per approved drawings complete in all respect. The blockboard, laminate and veneer must be of reputed brand such as Century, Green or equivalent with necessary hardware of reputed brand such as Godrej, Hettich, Hafele or equivalent. |
| 111 | Providing and fixing of glass patch lock with cylinder complete in all respect. Make Dorset, Model -DPF-325 |
| 112 | Providing and fixing of Tower Bolt 18`` long with square shape rod 10mm size make Dorset, model no. TS-1810 stainless steel including SS/CP Brass screw etc. Complete in all respect as per direction of Engineer-in-Charge. |
| 113 | Providing and fixing of Tower Bolt 8`` long with square shape rod 10mm size make Dorset, model no. TS-810 stainless steel including SS/ CP brass screw etc. Complete in all respect as per direction of Engineer-in-Charge. |
| 114 | Providing and fixing of Tower Bolt 6`` long with square shape rod 10mm size make Dorset, model no. TS-610 stainless steel including SS/CP brass screw etc. Complete in all respect as per direction of Engineer-in-Charge. |
| 115 | Providing and fixing of Door stopper stainless steel twin leg make Dorset. Model no. DS2HT including SS/CP brass screws etc. Complete in all respect as per Direction of Engineer-In-Charge |
| 116 | Providing and fixing of H Type handle 450 mm long in pair of Dorset make including necessary fittings etc. Complete in all respect as per Direction of Engineer-In-Charge. (model SH18PSS25) |
| 117 | Providing and fixing of H Type handle 400 mm long in pair of Dorset make including necessary fittings etc. Complete in all respect as per Direction of Engineer-In-Charge. (model SH16PSS25) |
| 118 | Providing and fixing of stainless steel Knob set of Dorset make model no. PRTOSM (SS) complete in all respect as per direction of Engineer-in-charge |
| 119 | Providing and fixing of mortised dead lock ML 112SS with 60mm cylinder both side key CL 100 complete set of dorset make complete in all respect as per direction of Engineer-in-charge. |
| 120 | Providing and fixing Chrome finish Bottle Trap 32mm Size with 350mm long for wash basin ( Make Kohlar) (Model no. 75823IN-CP)complete in all respect. |
| 121 | Providing and fixing Click Clack Waste 32mm Size Full Thread for wash basin ( Make Kohlar) (Model no. 20746IN-CP)complete in all respect. |
| 122 | Providing and fixing Chrome finishSingle Lever Concealed Basin Mixer (Wall Mounted) with Spout (Composite One Piece Body( Make Kohlar) (Model no. 5679IN-CP and 25759IN-4ND-CP) complete in all respect. |
| 123 | Providing and fixing Table Top Basin, with Size: 600 mm Design in Rectangular Shape ( Make Kohlar) (Model no. 21226IN-SS-O) complete in all respect. |
| 124 | Providing and fixing Chrome finish Angular Stop Cock with Wall Flange ( Make Kohlar) (Model no. 16087IN-4-CP) complete in all respect. |
| 125 | Providing and fixing Chrome finish Concealed Stop Cock with Adjustable Wall Flange, Size 15mm ( Make Kohlar) (Model no. 16088IN-NA)complete in all respect. |
| 126 | Providing and fixing Chrome finish Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube and Wall Hook with complementary angle valve (Make Kohlar) (Model no. 12927IN-CP and 80158IN-NAV-CP) complete in all respect. |
| 127 | Providing and fixing Chrome finish VIC pneumatic control plate for single piece slim conceald cistern( Make Kohlar) (Model no. 5413IN-P-CP) complete in all respect. |
| 128 | Providing and fixing Pneumatic Single Piece Slim Concealed Cistern Body with Installation Kit for Wall Hung WC (without Flush Control Plate)( Make Kohlar) (Model no. 33931IN-P-O) complete in all respect. |
| 129 | Providing and fixing Rimless Wall Hung WC With UF Soft Close Seat Cover, Hinges,Accessories Set, with connector ( Make Kohlar) (Model no. 26998IN-O and 1527926) complete in all respect. |
| 130 | Providing and fixing Chrome finish Sliding Rail ( Make Kohlar) (Model no. 72740IN-CP)complete in all respect. |
| 131 | Providing and fixing in position CP Jali of heavy quality 100mm dia of standard make approved be engineer in charge complete to the entire satisfaction of Engineer in charge |
| 132 | Supplying, Installation, Testing and Commissioning of UTP Patch Panel 24 Port loaded for Cat6 Commercial type working at maximum 50 degree celsius temp. complete in all respect upto entire satisfaction of Enigneer-In-Charge of the work. |
| 133 | Supply, Installation, Testing and commissioning of 17 inch Full HD Screen with Front Fold Monitor Lift, LED/Screen Tilt Angle Automatic 15 degree/ Electrical adjustable 0-30 degree, Inclination Angle with Vertical (degrees) 15-20, Connection Interface VGA/H-DMI plus RS232 I/O, Motorized Cable Management YES, Contrast 800:1 Full View Angle plus /-178, Panel Button Detail UP/DOWN/STOP for monitor operation Tilt/back for angle adjustable. Make:- GNL / ASUS / Audiovan |
| 134 | Supply, Installation, Testing and commissioning of 240 Watts Mixer Amplifier, 4 microphone / line inputs, plus music source input, Announcement only output, 3-wire volume override, Wide range of output power (240 Watts), 2-tone chime, 120 VAC ±10%, 50/60 Hz (reduced power at lower mains voltage), Frequency response (Line) 60 Hz to 20 kHz ( plus 1/-3 dB @ -10 dB ref. rated output), Dynamic range 93 dB, S/N (flat at min volume/muted) )75 dB, background music (BGM) input. Makes: Bosch / Powersoft / Nexo |
| 135 | Supply, Installation, Testing and commissioning of Ceiling two-way , output power of 30-watt loudspeaker, Low Frequency 1 × 4-inch woofer (83 mm) or better, High Frequency 1 × 0.75-inch (20 mm) , frequency range of 65 Hz – 20 kHz, Nominal Impedance 8 ?. Make: Electro-voice / Martin Audio / Bose |
| 136 | SITC of NVR 8-Ch 4K Network Video Recorder 265 plus /H.265/H.264/H.264 plus video formats • Connectable to the third party network cameras • Up to 8 IP cameras can be connected • Recording at up to 8 MP resolution • Live view, storage, and playback of the connected camera at up to 8 MP resolution • HDMI and VGA independent outputs (PT-NR2A08-Q1 and PT-NR2A16-Q1) • HDMI Video output at up to 4K (3840 × 2160) resolution , 1 SATA interface connectable for recording and backup, 1 self-adaptive 10/100/1000 Mbps network interface. Network protocols TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS, SATA 1 SATA interface Capacity Up to 6TB capacity for each disk, Network interface 1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface USB interface 2 × USB 2.0. . MAKE:- PRAMA / CP PLUS / Honeywell |
| 137 | Providing and Fixing of ABC Type 6 kg (Stored Pressure) Fire Extinguisher filled with Mono Ammonium Phosphate Powder MAP 50% Confirming to ‘IS 4308’, Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose and Nozzle and Epoxy Polyester Powder Coated Mild Steel body, Fire Extinguishers As per ‘IS 15683 : 2018’ ISI Marked. [3Q] |
| 138 | Supply, Installation, Testing and Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. |
| 139 | Supply, Installation, Testing and Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. |
| 140 | SITC of 4MP Fixed Lens Dome Camera: Image Sensor:1/2.7` 4MP PS CMOS Image Sensor, Effective Pixels 2688 (H) × 1520 (V) Minimum Illumination 0.001 [email protected] (Color, 30 IRE), 0.0001 [email protected] (B/W, 30 IRE), 0 lux (IR on) Shutter Speed Auto/Manual 1/3 s–1/100,000 s Angle Adjustment Pan: 0°–360°, Tilt: 0°–90°, Rotation: 0°–360° White Balance: Auto/ Manual, Regional custom) Gain Control(AGC) Auto/ Manual Lens Type Fixed-focal Max. Aperture F1.4 ,Lens 3.6mm fixed Lens, Lens Mount M12,S/N Ratio )58 dB Back Light Compensation BLC/ HLC/ WDR(120dB),Angle of view 3.6 mm, Smart IR Support IR Control Auto, Manual, IR Number 2 IR LED, 2 Warm Light IR IR Range of 50 Mtr. Warm Light Warm Light Range of 30 Mtr.,Smart Illumination: Support, Day/Night Auto (ICR)/Color/B/W Audio Built-in Mic,Iris Control Fixed Stream Capability Quad Stream Frame Rate Main stream: 4MP (2688 × 1520)@1–25/30fps/ (2560×1440)@1–25/30fps Sub stream 1: 720p(1280 x 720)@1-25/30fps, VGA (640 x 480)@1-25/30fps, CIF (352x 288) @1-25fps/ (352 x 240)@1-30fps, D1 (704 × 576)@1 25fps/ (704 × 480)@1-30fps Sub stream 2: VGA (640 x 480)@1 25/30fps, CIF (352 x 288)@1-25fps/ (352 x 240)@1-30fps, D1 (704 × 576)@1-25fps/ (704 × 480)@1-30fps Sub stream 3: D1 (704 × 576)@1fps/ (704 × 480)@1fps Mirror Function Support Noise Reduction 3D NR Motion Detection OFF/ON (4 areas, rectangular) Resolution 4MP (2688 × 1520)/ (2560 × 1440), 3MP (2304 × 1296), 2MP (1920 × 1080), 1.3MP (1280 × 960), 720p (1280 × 720), D1 (704 × 576/704 ×480), VGA (640 × 480), CIF (352 × 288/352 × 240) Video Format PAL/NTSC Privacy Mask 4 areas IVS (Perimeter Protection) Tripwire, Intrusion, SMD ROI Support (4 areas) Audio Input 1 Channel (RCA port) Audio Output 1 Channel (RCA port) OSD Camera title, Date and Time Audio Compression G.711a, G.711Mu, G.726, PCM, AAC Protocol SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP V3, TLS Version 1.2, TCP/IP, PPPoE, NFS, UDP, ICMP, IGMP, SSL, DHCP, SMTP, RTSPS, ONVIF (Profile S,Profile G, Profile T), unicast, multicast Ethernet RJ-45 (10/100 Base-T) Video Compression: H.265, H.264, H.264H, H.264B,Alarm IN 1, Channel in: 1, Alarm Out 1 Channel out: 1, Storage SFTP, Mirco SD card (Max. 512GB) Smart search Work together with Smart NVR to perform refine intelligent search, event extraction and merging to event videos Alarm Event No SD card, SD card full, SD card error, Network disconnection, IP conflict, illegal access, Motion detection, Video tampering, Tripwire, Intrusion, Audio detection, Voltage detection, Security exception, External alarm Cyber Security AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, WSSE, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot, User/Host 6 ,Hardware Reset Point Support, Power Source 12 VDC/PoE (802.3af) Power Consumption Basic: 2 W (12 VDC):2.6 W (PoE), Weatherproof Standard IP67 and IK10, Operating Temperature –40 °C to plus 60 °C (–40 °F to plus 140 °F) Operating Humidity =95% Storage Temperature –40 °C to plus 60 °C (–40 °F to plus 140 °F) Storage Humidity =95% Casing Metal, Certifications : BIS,STQC, CE, RoHS, FCC, ISO 9001, 14001, 27001, 45001, CMMI Level 3 and Level 5, ISO/IEC 27032, GDPR.(Make CP Plus/ Honey well/Matrix) |
| 141 | SITC of LED Light 36 Watt 2`x2` Size (Recess Type) operation on single phase AC Supply including inbuilt LED Driver with constant current. lumens = 100 lumens /watt , 6500 K Cool white colour, input voltage 220-240,frequancy 50 Hz, power facto = 0.85, Protection IP20 for indoor and IP = 65 for outdoor fixtures. The body die cast aluminium powder coated. Temprature range -10 degree to plus 45°,THD (10%, surge protection = 2.5 KV, buring hours = 40000 Hours Complete in all respect. Make as per HPHC approved Brand List. |
| 142 | SITC of Wall Fan 16`` Sweep ( 400mm) oscillating type light duty Rated speed 1350 RPM with inbuilt regulator, blade, jaalli, Copper wound Motor, PVC body 03 no.blade. Power Consumption 57w.Air Delivery 65m³/min 2 years warranty Complete in all Respect. |
| 143 | SITC of 3 core 1.5sqmm Power cable.Material: Electrolytic Grade Annealed Copper Class: Class 2 (stranded) as per IS 8130 Conductor Size: 1.5 sq.mm per core Number of Cores: 3 (Phase, Neutral, Earth)IS 694 (for PVC insulated cables up to 1.1 kV |
| 144 | Supply, installation, Testing and Commissioning of 24 port POE plus Switch, Layer-2, Smart managed having 24 PoE ports (1G) and 4 Gigabit uplinks / SFP slots (10G), Standard: 1EEE 802.3at (POE plus ), Power range min. 190 watt complete in all respect as per entire satisfaction of Engineer-in-charge. OEM should provide replacement with New product, No Refubrish products. Make: Cisco/ Netgear/Juniper/Alcatel /Extreme. |
| 145 | Supply, Installation, Testing and Comissioning of 9U indoor network rack suitable for wall mounting, conforming to DIN 41494, EIA-310 and IEC 60297 standards, made of CRCA steel sheet of thickness 1.0–1.2 mm (frame) and 0.8–1.0 mm (door) with powder coated finish, 19” mounting angles, lockable toughened glass front door with ventilation slots, top/bottom cable entry, with 1–2 nos. cooling fans, static load up to 25 kg,PDU complete with mounting brackets and accessories,as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Nordon/Rittal/Comrack/Valrack. |
| 146 | Supply of 18/20 watt LED tube light, life minimum 25000 hours and above, 4 feet long, minimum lumen efficiency 100 lm/watt i.e. 1800/2000 lumens for 18/20 watt light respectively complete with screw- nut as required for erection. Make as per HPHC approved brand |
| 147 | SITC of 50 LPH (50 ltr per hour) capacity RO, Commercial type including Pre-filters, RO plus UV plus UF plus TDS complete in all respect with making necessary connections, the water should be filtered with PH value (range 6.5 to maximum 8.0) and work shall be done as per entire satisfaction of Engineer-in-charge |
| 148 | Supply, Installation, Testing and Comissioning of Caller ID Corded Landline Phone with 16 Digit LCD Display and Adjustable contrast,10 One Touch Memory Buttons,2Ways SpeakerPhone,Music On Hold,Solid Build Quality,. Make :-Beetel M59N /Panasonic/Matrix |
| 149 | Supply, Installation, Testing and Commissioning of 65` LED TV Display, commercial type, 4K UHD, 24X7 , minimum brightness 500 NITS or above, HDMI x 2, resolution (3840 × 2160), wall mounted / floor stand as per required, make HPHC Brand list |
| 150 | Supply, Installation, Testing and Commissioning of 10 TB surveillance Hard disk Make: WD/Seagate/Toshiba capacity 10TB Connector SATA Interface SATA Operating Temperature 0°C to 65°C Certifications BSMI, CE, UL |
| 151 | `NS Item -Supply, Installation, Testing and Commissioning of of PC Client Intel i7, 13th generation processor with clock speed-minimum 3.0GHz, RAM8 GB and Expandable. Window 10 or Window 2016 Server or Unix based Edition .Minimum 512 GB . LAN Interface 10/100/1000 Mbps Ethernet.).. Mouse Optical . USB port at front and Software of cameras.1. Processor (CPU)Make: IntelModel: Core i7 (13th or latest available generation at time of supply) Base Clock Speed: Minimum 3.0 GHzCores: Minimum 6 cores (preferably 8 or more) Threads: As per processor standardCache: Minimum 12 MB Smart Cache2. Memory (RAM)Installed RAM: 8 GB DDR4 / DDR5Expandability: Up to 16 GB / 32 GB (minimum 2 DIMM slots) RAM Speed: Minimum 2666 MHz or higher3. Storage Primary Storage:Minimum 512 GB SSD (Preferred)(or 512 GB HDD if SSD not specified, but SSD strongly recommended) Interface: SATA / NVMe (NVMe preferred for performance) Expandability: Provision for additional storage (HDD/SSD slot)4. Operating System Compatible OS Options:Windows 10 Professional (64-bit) OR Windows Server 2016 ORUnix/Linux-based OS (Ubuntu/CentOS or equivalent)OS License: Genuine and activated (if Windows supplied)5. Networking (LAN Interface) Ethernet Port:10/100/1000 Mbps (Gigabit LAN) RJ-45 Port: 1 x minimumSupport for standard TCP/IP networking6. Ports and Connectivity USB Ports:Minimum 4 USB portsAt least 2 USB ports on front panel Video Output:HDMI / DisplayPort / VGA (minimum one) Audio:Mic-in and Line-out / Combo jack Additional Ports:Ethernet (RJ-45)Optional: USB 3.0 / USB-C7. Input Devices Keyboard:USB wired keyboard (standard layout) Mouse:Optical USB mouseMinimum 2 buttons plus scroll wheel8. GraphicsIntegrated Graphics (Intel UHD or better) Capable of Full HD display (1920×1080)9. Cabinet Type: Desktop /Cooling: Adequate ventilation with internal fans Build: OEM branded or industrial-grade10. Power SupplySMPS: Standard certified (minimum 80 plus efficiency preferred) Input Voltage: 220–240V AC, 50 HzSurge protection recommended11. Software (Camera System Integration) Pre-installed software for:CCTV / IP Camera viewing Recording and playback functionality Network camera integration supportCompatibility with standard surveillance systems (ONVIF preferred) with Originmal window 11 professional and antivirus for 2 years validity.12. Display Size 24” LED Resolution: Full HD (1920×1080) Ports: HDMI/VGA14. Compliance and Standards CE / FCC / BIS certified Energy-efficient compliant15. Additional Requirements Preloaded drivers and utilitiesSystem fully assembled, tested, and commissioned All cables and accessories included )Make: HP/ Dell` |
| 152 | SITC of 1.5 Ton Air Conditioner, High wall, 5 Star, inverter type Split A.C with cordless remoter control, 100% copper coils indoor and outdoor unit, eco-friendly Refrigeration gas R32/R410 for cooling, A.C. should be bear working on ambient temperature 52°C or above. 3 mtr copper refrigerant pipe and 3 mtr flexible drain pipe, Warranty of unit 1 year and 10 years on compressor, including cost of wall mounted / floor mounted (as required) MS Stand power coated complete in all respect. |
| 153 | SITC of 2 Ton Air Conditioner, cassette type, 2/3 Star, non- inverter type A.C with cordless remoter control, 100% copper coils indoor and outdoor unit, eco-friendly Refrigeration gas R32/R410 for cooling, A.C. should be bear working on ambient temperature 52°C or above. Warranty of unit 1 year and 10 years on compressor, including cost of wall mounted / floor mounted (as required) MS Stand power coated complete in all respect. |
| 154 | Supply of 12/15 watt LED round shape downlight offering high brightness (approx. 1125-1500 lumnes) and long life span (50000 hours) operate on 80V-300V A.C and of polycarbonate or aluminium material complete in all respect. Make as per approved brand list of HPHC. |
| 155 | SITC of 1.5 Ton Air Conditioner, cassette type, 2/3 Star, non- inverter type A.C with cordless remoter control, 100% copper coils indoor and outdoor unit, eco-friendly Refrigeration gas R32/R410 for cooling, A.C. should be bear working on ambient temperature 52°C or above. Warranty of unit 1 year and 10 years on compressor, including cost of wall mounted / floor mounted (as required) MS Stand power coated complete in all respect. |
| 156 | Supply and Installation of 25 mm dia PVC Hard drain pipe for A.C. , should be bear 10 kgf/cm² pressure, recess/ surface (as required), including cost of jointing of pipe complete in all respect. Make: D-plast/ Supreme/ Finolex. |
| 157 | SITC of 150 ltr capacity water cooler having fully stainless steel corrosion resistance (grade SS304) body with puff insulation, 150/150 ltr i.e. 150 ltr per hour cooling and 150 ltr water storage capacity, R134a refrigerant type, water tank sheet thickness )= 0.6 mm, Cooler Cabinet sheet thickness: 0.8mm (min), Water tank cover and lid bottom sheet material: High Impact Polystyrene (HIP) and Thickness:1.5mm (min) , Number of faucet-02, Two drainpipes shall be metallic or PVC (Poly Vinyl Chloride) , Plastic used in storage tank or in any part coming in contact with water shall be of food grade. Warranty on machine: 2 years. Warranty on compressor- 5 year, BIS Certification as per IS-1475 (Latest) complete in all respect with making necessary connections and work shall be done as per entire satisfaction of Engineer-in-charge.Make USHA/ Climatrol or approved brand list of HPHC |
| 158 | Supply, Installation, Testing and commissioning of All-in One Printer,Print, Scan, Copy,USB:Hi-Speed USB,Wireless: Wi-Fi,Print Resolution: Up to 600 × 1200 dpi,Scanner Type Flatbed (ADF / Platen),11.1 images per minute,Rear Tray Up to 100 sheets,Cassette Up to 250 sheets,Rear Tray A4, A5, A6, B5, LTR, LGL, Foolscap, FS,, Envelope (COM10, DL, C5, Monarch),Card Size (91 x 55 mm),101.6 x 152.4 mm (4x6”), 127 x 177.8 mm (5x7”),177.8 x 254 mm (7x10”), 203.2 x 254 mm (8x10”) Square (127 x 127 mm), Custom(width: 89 – 216 mm, 0length: 127 – 1 200 mm), Connectivity Wireless LAN IEEE802.11b/g/n/a*8/ac*8,Wired LAN 100 Base-TX/10 Base-T,Mobile ,Canon PRINT Inkjet/SELPHY,Easy-PhotoPrint Editor, Creative Park, with one year warranty for computers. Make - Canon G4070, Epson ,HP ,Brother |
| 159 | Supply, Installation, Testing and commissioning of A3 Monochrome Laser Multifunctional,Print, Copy, Scan, and Send,Control Panel 88.9-mm monochrome touch panel, Memory 1.0 GB RAM,NETWORK,Standard: 100Base-TX/10Base-T, Wireless LAN (IEEE 802.11 b/g/n)OTHERS Standard:USB 2.0 (Device) x1,Multi purpose Tray: Thin, Plain, Recycled, Thick, Colour, Bond, Label, Pre punched, Envelope Paper Cassette: Plain, Recycled, Colour, Pre punched,-sided: Up to 24 pages/min (A4), Up to 12 pages/min (A3), Up to 11 pages/min (A4R) 2-sided: Up to 16.7 pages/min (A4), Up to 7.5 pages/min (A3), Up to 7.8 pages/min (A4R),Copy 1 -sided: Up to 24 pages/min (A4), Up to 12 pages/min (A3), Up to 11 pages/min (A4R) 2-sided: Up to 16.7 pages/min (A4), Up to 7.5pages/min (A3), Up to 7.8 pages/min (A4R), Scan 50 Sheets (80 g/m2(gsm)),Authentication and Access Control Department ID Authentication (Department ID and PIN Login, Function Level Login),with one year warranty. Make Canon 2224n, Epson ,HP ,Brother |
| 160 | Supply of 1000 VA UPS (Line Interactive type) with AVR (Automatic Voltage Regulation) for ultimate voltage stabilization, ensuring optimum reliability. The UPS shall provide protection against overload, deep discharge, and overcharge, and shall be equipped with cold start function and auto restart facility during AC power recovery. The unit shall have a capacity of 1000 VA / 0.9 kW with a minimum battery backup of 30–35 minutes. Input voltage range shall be 140 V to 300 VAC with a frequency of 50 Hz ± 10%. The transfer time shall be typically 4–8 milliseconds. The output waveform in battery mode shall be modified sine wave. The UPS shall be equipped with SMF batteries rated at 12V, 7Ah (2 numbers). The system shall operate within a temperature range of 0°C to 40°C and relative humidity of 0–95% (non-condensing), with noise level less than 40 dB.one year warranty for ups and two year warranty for batteries . BIS certified and bear a valid ISI mark, wherever applicable. The UPS shall conform to IS 16242 (Part 1 and Part 2) The make shall be Eaton / Microtek / Numeric / Delta / APC / Luminous |
| 161 | SITC of 8 port POE plus Switch, Layer-2, Smart managed having 8 PoE ports (1G) and 2 Gigabit uplinks / SFP slots (10G), industrial outdoor grade switch, IP30, Standard: 1EEE 802.3at (POE plus ), Operating temp. -40 to 75 degree Celsius, Power range min 90 watt, mac address 8k complete in all respect as per entire satisfaction of Engineer-in-charge. Make: Cisco/ Netgear/Juniper/Alcatel/Extreme |
| 162 | Supply and erection of 4.5 kg CO2 type Fire Extinguisher ISI marked strictly adhering to IS :7285 (for Cylinder ) and IS :15683 (for portable extinguisher standard) extinguishing agent CO2 gas with 99.5% purity as per IS:15683 effective discharge: Minimum 95% of the contents must be discharged within 10 to 18 seconds with wall brackets of heavy duty MS`J` hook or `V` type brackets and have mounting height of the top of the extinguisher should generally be mounted at a height of 1.0 to 1.5 meters with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in Charge of the work. |
| 163 | SITC of 10-meter High-Speed HDMI 1.4b Cable, 10.2 Gbps bandwidth, supporting 4K @ 30Hz/60Hz (4:2:0). Cable shall feature 24 AWG OFC conductors, triple-layer shielding, and gold-plated connectors. Scope includes routing through conduits, termination, and successful 4K video transmission testing to the satisfaction of the Engineer-in-Charge. |
| 164 | Supply, Installation, Testing and commissioning of SPEAKER PHONES IP 64 (dust and splash resistance) with 2.4 Ghz wireless/ dual Bluetooth V 5.3 connectivity with dedicated USB dongle. with 8 microphone Omni directional array with 6 meter pickup radius minimum 8 hours talk time and also supports Daisy Chaining complete in all respect. Make:- AandT / CISCO /Beyerdynamic |
| 165 | SITC of EPABX System supporting IP extensions for future scalability with the 1 x10 / 100 Mbps RJ 45 ethernet port for web based management and Caller detail record (CDR) along with conferencing of minimum 3 party to 6 party built in conference capability with protection against power surges and lightening , operational range from 0 degree to 45 degree Celsius . All the internal wiring from the EPABX to the main distribution frame using standard 0.5 mm ATC (Annealed Tinned Copper) telephone cables with making necessary connections complete in all respect and as per charge-in- engineer satisfactory . Model -: MATRIX (16 plus 4 plus 2) |
| 166 | Supply, Installation, testing and commissioning of 5 Meters USB 3.0 (super speed) or higher to ensure a 5 Gbps data rate with built in signal booster, supports at least 900 mA (4.5 watt) output to power peripheral like external hard drives or webcam, conductor gauges minimum 24 AWG for power complete in all respect. |
| 167 | SITC of 4MP PTZ Camera with Optical Zoom 36X, IR Range 250 mtr. with following specifications: - Image Sensor: - 1/2.8 inch Progressive Scan CMOS or better Effective Pixel: - 4 MP (2560(H)X1440(V)) or better Min. Illumination: - Colour: [email protected]: B/W: [email protected], 0 Lux at IR ON Other Features: - WDR, BLC, HLC: 120dB WDR: White Balance - Auto/Tungsten/ Daylight/Manual: Gain Control 0~100%: 2D/3D DNR: EIS: DEFOG: Minimum 5 Areas of Privacy Masking: Smart IR Light Controller: Auto Tracking: (Auto/Manual)/OFF : TDN - Auto (ICR) / Color / BW Shutter Time: - Manual(1/1~1/1,00,000, Auto (normal: 1/1~1/30000 s: illumination mode:1/5~1/30,000s) Day and Night: - Auto (ICR) / Color / BW S/N =58dB Zoom: - Digital 16X and P-IRIS Optical 36X LENS: - • Focal Length: - 5.7~205.3mm @ F1.6(W)~F4.4(T) or better, PIRIS Lens • Field of View As per focal length Camera: - • Pan Range/Pan Speed: - Pan: 0° ~ 360° endless: • Tilt Range/Tilt Speed: - Tilt: 185° (-5° ~ 180°) • Preset Quantity: - 256 • Preset Freezing:- Support • IR Distance: - 250 m with inbuilt IR Light Controller for Auto / Manual / OFF Video: - • Primary Stream: - Mainstream: 4MP (2560x1440)/ 1080P(1920x1080)@25/30fps • Secondary Stream: - Sub Stream: 720P(1280x720)@25/30fps • Tertiary Stream: - Third Stream: VGA(640x480)@15fps • Quard Stream: - Fourth Stream: VGA(640x480)@15fps • Video compression: - H.265 HEVC/H.264/MJPEG Network: - • Ethernet: - 1*RJ45 10M/100M Ethernet Port • Network Storage: - Support Max 256G, Support ANR • Protocol: - ONVIF2.4.1, Profile S, IPv4/IPv6, TCP/IP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS,DHCP, ARP, UPnP, RTSP, RTP, RTCP, ICMP, IGMP, SSL, QoS, IEEE802.1x, PPPoE, ICMP, SNMP,SNTP, RSTP • Audio and Alarm: - 2-Way, Full duplex Audio Streams • Audio Compression: - G.711A/G.711U/AAC • Audio I/O: - 1 IN/1 out • Alarm I/O: - 1 IN/1 out • Storage: - Minimum 256 GB on-board Class 10 speed SD Card having Linux Unified card encryption key • Privacy Masking: - Up to 4 areas • Region of Interest: - Minimum 8 Regions or Zones of Rectangles with Off/On option • PTZ Auto Tracking: - Support Events: - • Event Trigger: - Motion Detection, Network Disconnection, External Input, Audio Alarm, IP Address conflict, illegal Access, Storage anomaly: Tampering • Event Action: - FTP Upload, SD Card Record, External Output, PTZ Motion, HTTP Notification, etc. • System Compatibility: - ONVIF Profile S and G and T Compliant. Quoted Model should be listed on ONVIF site on or before the date of bid submission. General: - • Working Condition: - Temperature: -50ºC to 70ºC / Humidity: 0-90% RH • Power Supply: - DC24V/1.5A(±10%) • Power Consumption: - 13W • Surge Protection: - Die-cast Aluminum housing: IP67 Compliant, IK10 Certified, In-built Heater Fan and BIS: IS 13252 (Part 1):2010 MTBF Compliance: - Reliability Certification: MTBF )1,00,000 hours at 40°C • ONVIF - G S T` • Security: - Authorized username and password, HTTPS with password, HTTPS digest authentication, Watermark, Signed Firmware, User Authenticationand encrypted firmware. Certifications - CE, FCC, BIS, STQC i.e as MEITY Guidelines: ER : Essential Requirement(s) for Security of CCTV have been published in Ministry of Electronics and information Technology (MEITY) Public Procurement (Preference to Make in India) Order 2017-Notifying CCTV/ Video Surveillance System for Security in furtherance of the Order dated 6th March,2024 along with Trusted Supply Chain. The testing agency authorized to do the Essential Requirement testing is STQC or any other agency notified by MEITY from time to time. Make:- PRAMA / CP PLUS / Honeywell |
| 168 | Supply and Installation of Copper refrigerant pipe (with 2.5 sqmm 3/4 core copper flexible cable of approved make) for A.C. of suitable size with tubular insulation, conforming to ASTM B280 standards., Liquid Line (Smaller pipe): 1/4` (6.35 mm), 3/8` (9.52 mm), Suction Line (Larger pipe): 3/8` (9.52 mm), 1/2` (12.7 mm), 5/8` (15.88 mm), 3/4` (19.05 mm), 7/8` (22.22 mm) , Larger Systems: 1-1/8` (28.58 mm), refrigerant copper pipes, the standard insulation thickness from 9mm to 13mm (approx. 3/8` to 1/2`), recess/ surface (as required), including cost of jointing of pipe complete in all respect. Make- Totaline/ metatube/ Hitachi (Ryaku). |
| 169 | Providing, supplying, installing, testing and commissioning of 260 mm sweep exhaust fan, suitable for wall/window mounting, having aerodynamically balanced blades made of high-grade plastic/metal, driven by a heavy-duty single-phase induction motor with permanently lubricated ball bearings, complete with built-in bird guard/shutter, safety grille and mounting frame, suitable for operation on 230V AC, 50 Hz single phase supply, having low power consumption power input of less than or equal to of 25 w, high air delivery of at least 100 to 250 cubic meter per hour and along with the speed of1050 to 1350 RPM and low noise level, with corrosion-resistant body finished in powder coating, conforming to relevant IS standards such as IS 2312, complete with all necessary accessories including wiring, fixing hardware, and making good the wall opening, ensuring proper ventilation performance, complete in all respects as required. |
| 170 | Providing, supplying and laying of 1.8 metre 4K HDMI patch cord, high-speed HDMI cable compliant with HDMI 2.0/2.0b or higher standard, having high-purity oxygen-free copper conductors with triple-layer shielding (foil plus braided shielding) to minimize EMI/RFI interference, gold-plated HDMI Type-A connectors at both ends for corrosion resistance and stable signal transmission, supporting ultra-high-definition video resolutions up to 4K (3840 × 2160) at 60 Hz, along with support for 3D video, HDR, deep colour, Ethernet channel, and multi-channel digital audio formats including Dolby True HD and DTS-HD Master Audio, with bandwidth capability up to 18 Gbps, flexible PVC/LSZH outer jacket for durability and easy routing, plug-and-play type suitable for connecting HDMI-enabled devices such as TVs, monitors, projectors, computers, and media players, complete in all respects as required. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
